High Throughput Satellites (HTS) in geostationary Earth orbit (GEO) have been rapidly launched to meet the growing demand for high-speed data. However, the latency of HTS remains the same as that of conventional GEO satellites due to the characteristics of their orbit. Recently, Starlink HTS satellites in low Earth orbit (LEO) mega constellations have been operationalised globally, providing low-latency internet services compared to GEO HTS. Despite their high-speed benefits, Ku-band HTS systems are highly susceptible to rain-induced signal attenuation, particularly in regions with heavy rainfall, such as the tropics and equatorial countries. This phenomenon weakens the radio frequency signals and impacts real-time latency in the communication link. This research aims to determine the latency effect of the HTS satellite in LEO and GEO and evaluate its performance under heavy rainfall conditions. This study utilises real satellite link services from SES-12 GEO HTS and LEO Starlink for performance assessment. Continuous latency measurements are recorded over six months to analyse Ku-band performance in a heavy rainfall region. The results indicate that extreme rainfall in the tropical region significantly affects GEO satellite links, causing prolonged signal degradation due to fixed ground stations. In contrast, Starlink’s LEO network experiences less impact from rain fade, as it dynamically switches between multiple satellites. The results show latency for the GEO terminal link ranges from 600 milliseconds (ms) to 3000 milliseconds (ms), whereas latency for the LEO Starlink terminal ranges from 20 milliseconds (ms) to 100 milliseconds (ms). Starlink provides higher satellite link availability at 99.6% onsite compared to 94% for the tropical region's SES-12 GEO HTS satellite services. ABSTRAK: Satelit Jalur Lebar Berkapasiti Tinggi (HTS) dalam orbit geostasioner (GEO) berkembang pesat bagi memenuhi permintaan data berkelajuan tinggi. Namun, latensi HTS GEO kekal tinggi seperti satelit GEO tradisional. Sebaliknya, HTS dalam orbit bumi rendah (LEO) seperti Starlink menawarkan internet berlatensi rendah secara global.Walaupun berkelajuan tinggi, sistem HTS menggunakan jalur Ku terdedah kepada pelemahan isyarat hujan, terutamanya di kawasan tropika. Fenomena ini bukan sahaja melemahkan isyarat frekuensi radio tetapi juga menjejaskan latensi komunikasi masa nyata. Penyelidikan ini bertujuan untuk menentukan kesan latensi sistem satelit HTS di orbit LEO dan GEO serta menilai prestasinya dalam keadaan hujan lebat. Pengukuran latensi berterusan direkodkan selama enam bulan bagi menganalisis prestasi jalur Ku di kawasan beriklim hujan lebat.Kajian ini menilai kesan latensi HTS LEO dan GEO dalam keadaan hujan lebat menggunakan perkhidmatan satelit SES-12 GEO HTS dan LEO Starlink di Makmal Komunikasi Satelit IIUM. Keputusan menunjukkan hujan lebat memberi kesan besar kepada sambungan GEO kerana stesen bumi tetap, manakala rangkaian LEO Starlink kurang terjejas kerana boleh beralih antara satelit. Kelewatan GEO ialah 600ms–3000ms, manakala Starlink hanya 20ms–100ms. Starlink juga lebih stabil dengan 99.6% ketersediaan berbanding 94% bagi SES-12 GEO HTS di kawasan tropika menyebabkan degradasi isyarat berpanjangan.
The potential consequences of interference on communication networks are one of the main challenges in the nature and efficiency of wireless communication links. The interruption is seen as additional noise to the device, which can have a major impact on the efficiency of the connection. The rapid expansion of broadband wireless networks and the increasing congestion of the radio frequency spectrum due to shared usage by terrestrial and satellite networks have heightened concerns about potential interference. To optimize spectrum utilization, multiple terrestrial and satellite networks often coexist within the same frequency bands allocated for satellite communications services. Spectrum interference in wireless networks is a topic of much interest in the current scenario as it can present a lot of challenges. This article provides a critical review of the coexistence and spectrum sharing in wireless networks. Along with this, mitigation techniques to avoid interference have also been discussed in detail. The article aims to give a detailed discussion on the challenges and opportunities in this field by reviewing significant recent works in this field.
1 July 2018 in Indonesian Journal of Electrical Engineering and Computer Science
This paper present a recognition technique of metal placed inside and between two walls. A unique scheme of recognition of metallic objects through Ultra Wide Band (UWB) Modified Antipodal Vivaldi Antenna (MAVA) frequency range of (3.1GHz to 10.6 GHz) is presented in this paper.The working mechanism of detection system based on Time Domain Reflectrometry (TDR) using through wall imaging (TWMI). A very small duration pulses generated by Vector Network Analyzer (VNA) which are used for illuminate the wall.The analysis of a system under UWB antenna probe array. The simulation results of MAVA have given an enormous potential of penetration, in order to recognize concealed metal objects with fine precision, proving a smart development in the detection system technology. The improvement of resolution in an image, special filters have been developed and implemented. The design and optimization progression is conceded out via CST simulation software for parametric performance assessment of return loss, radiation pattern and directivity.
This paper proposes a simple approach to design microstrip patch antenna that can resonate at multiple frequency bands specifically at quintuple resonant frequencies. The antenna is designed to meet five frequency bands which are 0.9GHz, 1.8GHz, 2.1GHz, 2.45GHz and 2.8GHz. The microstrip patch antenna was designed to operate as dual band and a capital L-slot was introduced to design as triple band antenna. Subsequently by adding small l-slots enhanced antenna characteristics to quad band and quintuple bands. The approach is simple and the design of quintuple band antenna consists of a microstrip patch antenna with triple slots inserted on top of the radiating patch. The antenna is designed and simulated using CST Microwave studio. The proposed antenna was fabricated and tested using vector network analyzer. The test result is found close to that obtained by simulation.