In the last three decades, smart materials have become popular. The piezoelectric materials have shown key characteristics for engineering applications, such as in sensors and actuators for industrial use. Because of their excellent mechanical-to-electrical and vice versa energy conversion properties, piezoelectric materials with high piezoelectric charge and voltage coefficient have been tested in renewable energy applications. The fundamental component of the energy harvester is the piezoelectric material, which, when subjected to mechanical vibrations or applied stress, induces the displaced ions in the material and results in a net electric charge due to the dipole moment of the unit cell. This phenomenon builds an electric potential across the material. In this review article, a detailed study focused on the piezoelectric energy harvesters (PEH’s) is reported. In addition, the fundamental idea about piezoelectric materials, along with their modeling for various applications, are detailed systematically. Then a summary of previous studies based on PEH’s other applications is listed, considering the technical aspects and methodologies. A discussion has been provided as a critical review of current challenges in this field. As a result, this review can provide a guideline for the scholars who want to use PEH’s for their research.
With the breadth of applications and analysis performed over the last few decades, it would not be an exaggeration to call piezoelectric materials “the top of the crop” of smart materials. Piezoelectric materials have emerged as the most researched materials for practical applications among the numerous smart materials. They owe it to a few main reasons, including low cost, high bandwidth of service, availability in a variety of formats, and ease of handling and execution. Several authors have used piezoelectric materials as sensors and actuators to effectively control structural vibrations, noise, and active control, as well as for structural health monitoring, over the last three decades. These studies cover a wide range of engineering disciplines, from vast space systems to aerospace, automotive, civil, and biomedical engineering. Therefore, in this review, a study has been reported on piezoelectric materials and their advantages in engineering fields with fundamental modeling and applications. Next, the new approaches and hypotheses suggested by different scholars are also explored for control/repair methods and the structural health monitoring of engineering structures. Lastly, the challenges and opportunities has been discussed based on the exhaustive literature studies for future work. As a result, this review can serve as a guideline for the researchers who want to use piezoelectric materials for engineering structures.
The potential consequences of interference on communication networks are one of the main challenges in the nature and efficiency of wireless communication links. The interruption is seen as additional noise to the device, which can have a major impact on the efficiency of the connection. The rapid expansion of broadband wireless networks and the increasing congestion of the radio frequency spectrum due to shared usage by terrestrial and satellite networks have heightened concerns about potential interference. To optimize spectrum utilization, multiple terrestrial and satellite networks often coexist within the same frequency bands allocated for satellite communications services. Spectrum interference in wireless networks is a topic of much interest in the current scenario as it can present a lot of challenges. This article provides a critical review of the coexistence and spectrum sharing in wireless networks. Along with this, mitigation techniques to avoid interference have also been discussed in detail. The article aims to give a detailed discussion on the challenges and opportunities in this field by reviewing significant recent works in this field.
Utilizing antenna diversity techniques has become a well-known approach to improve the performance of wireless communication systems. Multiple antenna arrays with half-length spacing, such as a uniform linear array (ULA), have been taken into consideration. Since 60 GHz is an unlicensed frequency band and ideal for local propagation, it is where the technology is being used. The transmitter and receiver both accomplish QAM modulation and demodulation. The performance in terms of bit error rate (BER) was tested in MATLAB simulation software for all antenna diversity scenarios: the single input and single output (SISO) DWT, multiple input and single output (MISO) DWT, single input and multiple output (SIMO) DWT, and multiple input and multiple output (MIMO) DWT. The MIMO DWT was shown to be the best of them. The performance of MIMO OFDM using various wavelets was also simulated, and the performance of the Haar wavelet transform was 2 dB better than that of the other wavelet transform. Compared to simulation results, the analytical results showed good agreement with little discrepancy.
1 December 2019 in TELKOMNIKA (Telecommunication Computing Electronics and Control)
A communication method is proposed using Minimum Mean Square Error (MMSE) precoding and Successive Interference Cancellation (SIC) technique for millimetre-wave multiple-input multiple-output (mm-Wave MIMO) based wireless communication system. The mm-Wave MIMO technology for wireless communication system is the base potential technology for its high data transfer rate followed by data instruction and low power consumption compared to Long-Term Evolution (LTE). The mm-Wave system is already available in indoor hotspot and Wi-Fi backhaul for its high bandwidth availability and potential lead to rate of numerous Gbps/user. But, in mobile wireless communication system this technique is lagging because the channel faces relative orthogonal coordination and multiple node detection problems while rapid movement of nodes (transmitter and receiver) occur. To improve the conventional mm-wave MIMO nodal detection and coordination performance, the system processes data using symbolized error vector technique for linearization. Then the MMSE precoding detection technique improves the link strength by constantly fitting the channel coefficients based on number of independent service antennas (M), Signal to Noise Ratio (SNR), Channel Matrix (CM) and mean square errors (MSE). To maintain sequentially encoded user data connectivity and to overcome data loss, SIC method is used in combination with MMSE. MATLAB was used to validate the proposed system performance.
9 July 2026 in IFAC Journal of Systems and Control