This paper describes a new circuit integrated on silicon, which generates temperature-independent bias currents. Such a circuit is firstly employed to obtain a current reference with first-order temperature compensation, then it is modified to obtain second-order temperature compensation. The operation principle of the new circuits is described and the relationships between design and technology process parameters are derived. These circuits have been designed by a 0.35 /spl mu/m BiCMOS technology process and the thermal drift of the reference current has been evaluated by computer simulations. They show good thermal performance and in particular, the new second-order temperature-compensated current reference has a mean temperature drift of only 28 ppm//spl deg/C in the temperature range between -30/spl deg/C and 100/spl deg/C.

A steady trend towards the design of mostly-digital and digital-friendly analog circuits, suitable to integration in mainstream nanoscale CMOS by a highly automated design flow, has been observed in the last years to address the requirements of the emerging Internet of Things (IoT) applications. In this context, this tutorial brief presents an overview of concepts and design methodologies that emerged in the last decade, aimed to the implementation of analog circuits like Operational Transconductance Amplifiers, Voltage References and Data Converters by digital circuits. The current design challenges and application scenarios as well as the future perspectives and opportunities in the field of digital-based analog processing are finally discussed.

In this paper, passive-less fully-digital operational transconductance amplifiers (DIGOTA) for energy- and area-constrained systems are modeled and analyzed from a design viewpoint. The digital behavior of DIGOTAs is modeled as an equivalent small-signal differential-mode circuit with zero bias current, and a common-mode feedback loop operating as a self-oscillating threshold sampler. Such continuous-time equivalent circuits are used to derive an explicit model of the main performance parameters that are generally adopted to characterize OTAs. This provides an insight into circuit operation and allows to derive practical guidelines to achieve a given design target. Among the others, an explicit model is derived for the DC gain, the frequency response, the gain-bandwidth product, the input-referred noise, and the input offset voltage. The models are validated via direct comparison with multi-die measurement results in CMOS 180 nm. From an application viewpoint, the voltage (power) reduction down to 0.25 V (sub-nW) uniquely enable direct harvesting (e.g., with solar cells), suppressing any intermediate DC-DC conversion stage. This further enhances the area efficiency advantage of DIGOTA stemming from its fully-digital nature, making it well suited for cost-sensitive and purely-harvested systems.

A novel, digital-in-concept approach in the design of analog differential circuits, suitable to very low voltage, aggressively scaled, pure digital integrated circuit technologies, is explored in this paper. A differential stage based on the proposed technique is presented and its operation as a voltage comparator and as an operational amplifier in negative feedback configurations is discussed and demonstrated on the basis of theory and simulations. The practical feasibility of the proposed approach is finally verified by experiments carried out on a proof-of-concept prototype.

In this paper, a pW-power relaxation oscillator for sensor node applications is presented. The proposed oscillator operates over a wide supply voltage range from nominal down to deep sub-threshold and requires only a sub-pF capacitor for Hz-range output frequency. A true pW-power operation is enabled thanks to the adoption of an architecture leveraging transistor operation in super-cutoff, the elimination of voltage regulation, and current reference. Indeed, the oscillator can be powered directly from highly variable voltage sources (e.g., harvesters and batteries over their whole charge/discharge cycle). This is achieved thanks to the wide supply voltage range, the low voltage sensitivity of the output frequency and the current drawn from the supply. A test chip of the proposed oscillator in 180 nm exhibits a nominal frequency of approximately 4 Hz, a supply voltage range from 1.8 V down to 0.3 V with 10%/V supply sensitivity, 8-18-pA current absorption, and 4%/°C thermal drift from -20 °C to 40 °C at an area of 1600 μm ² . To the best of the authors' knowledge, the proposed oscillator is the only one able to operate from sub-threshold to nominal voltage.

A fully-digital operational transconductance amplifier (DIGOTA) architecture for tightly energy-constrained low-cost systems is presented. A 180nm DIGOTA testchip exhibits an area below the 1,000-μm2 wall, and 2.4-nW power under 150pF load, and a minimum supply voltage Vmin of 0.25 V. In the 0.3-0.5 V supply range, DIGOTA improves the areanormalized small (large) signal energy FoM by at least 836X (267X) over prior sub-500mV OTAs, while reducing area by 27-85X. The low-Vmin and nW-power features are shown to enable direct harvesting at the mm scale.