We present a synthesis of the sparse matrix/adaptive integral method (SM/AIM) and the multiresolution (MR) approach for the analysis of electrically large finite arrays, with planar or 3-D radiating elements; the two methods were separately introduced previously. The use of the MR has the effect of a preconditioner and speeds up the convergence rate of the SM/AIM of almost two orders of magnitude, with a total reduction of the numerical complexity with respect to the standard MoM of almost three orders of magnitude
12 November 2007 in IEEE Transactions on Antennas and Propagation
The relationship between the properties of the basis functions employed to discretize the electric field integral equation (EFIE) and the eigenvalue spectrum of the resulting method of moments (MoM) matrix is studied. We concentrate on dense meshes, i.e., on complex geometries with large number of unknowns per wavelength, and/or disparate mesh cells sizes, and/or low frequency. These are typical occurrences in antennas, packaging and microwave circuits. We show that if the basis functions have separated Fourier spectra, the diagonal MoM matrix entries are close to the eigenvalues, and explain it in terms of the Fourier spectrum of the Green's function. For such a basis, diagonal preconditioning drastically reduces the condition number. This does not happen with sub-domain basis functions like the Rao-Wilton-Glisson (RWG), or with their linear combination into loop-tree or loop-star bases that are employed to solve low-frequency problems. Finally we analyze the properties of a multiresolution (MR) basis formed by linear combinations of RWG, but whose functions possess some degree of (Fourier) spectral resolution. We show that there is still correspondence between matrix diagonal, Green's function (Fourier) spectrum, and matrix eigenvalues. Diagonal preconditioning of the MR-MoM matrix causes the eigenvalues to cluster around 1, as it happens with the MoM matrix for the magnetic field integral equation. This strongly impacts on the EFIE matrix condition number and the speed of convergence of iterative solvers.
In this paper, the design of a beam scanning, 3D-printed dielectric Transmitarray (TA) working in Ka-band is discussed. Thanks to the use of an innovative three-layer dielectric unit-cell that exploits tapered sections to enhance the bandwidth, a 50 × 50 elements transmitarray with improved scanning capabilities and wideband behavior has been designed and experimentally validated. The measured radiation performances over a scanning coverage of ±27 shown a variation of the gain lower than 2.9 dB and a 1-dB bandwidth in any case higher than 23%. The promising results suggest that the proposed TA technology is a valid alternative to realize a passive multibeam antenna, with the additional advantage that it can be easily manufactured using 3D-printing techniques.
The design, the numerical analysis and the experimental characterisation of a convex conformal reflectarray (CRA) has been carried out, with the aim of investigating the feasibility of reflectarrays bent on convex curved surfaces. A medium‐size offset CRA in Ka‐band has been designed, and a demonstrator has been manufactured and measured. The results prove the correctness of the design procedure and the feasibility of this type of antenna, pointing out the differences, also in terms of radiation performances, with respect to a planar reflectarray.
This paper explores the possibility of integrating a smart electromagnetic skin into a street light or traffic light pole to enhance the coverage of a 5G base station operating in the millimeter-waves frequency band with the consequent improvement of the wireless network performance. Specifically, the electromagnetic characteristics of a curved smart electromagnetic skin, which can be easily integrated into a cylindrical radome enclosing the pole, have been analyzed and compared with those of a planar solution. Additionally, the coverage provided by a curved smart electromagnetic skin in a real urban scenario has been considered. The obtained results confirm that using a curved smart electromagnetic skin is both feasible and convenient from several points of view: it guarantees better performance than a planar configuration occupying the same volume, it is simpler to mount and it has a lower visual impact.
15 December 2022 in IEEE Antennas and Wireless Propagation Letters
In this letter, an innovative ReflectArray (RA) antenna able to radiate in the same direction multiple Orbital Angular Momentum (OAM) modes, is presented: depending on the direction of arrival of the impinging field, the RA radiates a broadside beam carrying on an OAM mode with different index. Two circular RAs with diameter $D = 19.8\lambda$ at the the frequency $f_{0} = 30\,$ GHz, able to radiate two or four OAMs, have been designed and simulated, while a prototype of the dual-mode configuration has also been manufactured and experimentally characterised. The obtained results prove that vortex beams are successfully generated in the range of frequencies from 28 to 32 GHz, confirming the effectiveness of the proposed design.