Andrea Massaccesi

Dr. Andrea Massaccesi

Department of Electronics and Telecommunications, Politecnico di Torino, 10129 Turin, Italy
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 August 2018 in IEEE Access
Verified
Journal Article
Open access
AMAndrea Massaccesi
Andrea Massaccesi
PPPaola Pirinoli
Paola Pirinoli
VBValentina Bertana
Valentina Bertana
GSGiorgio Scordo
Giorgio Scordo
SMSimone Luigi Marasso
Simone Luigi Marasso
GDGianluca Dassano
Gianluca Dassano
In this paper, a three-layer dielectric structure is presented as innovative unit-cell element for transmitarray (TA) antennas with enhanced bandwidth. It consists of a central layer, with a varying size square hole, used to compensate the phase of the incident field and located between two other identical layers with linearly tapered square holes, acting as matching circuits. The effectiveness of this unit-cell is demonstrated by the numerical and the experimental results here presented. As a first step, three different TAs with increasing size are designed and simulated: their 1-dB gain bandwidth, centered at 30 GHz, varies from the 30.9% of the smallest configuration, having size of 10λ 0 x 10λ 0 , to the 17.5% of the 20λ 0 x20λ 0 TA. A slightly modified unit-cell is then designed, with the aim of realizing a prototype with an additive manufacturing (AM) technique. A 3D-printed dielectric TA with a size of 15.6λ 0 x15.6λ 0 has been manufactured and experimentally characterized. The measured prototype shows excellent performances, achieving a 1-dB gain bandwidth of 21.5%: these results prove the enhanced features of the introduced unit-cell and demonstrate the TA feasibility with AM techniques.

28 March 2019 in Electronics
Verified
Journal Article
Open access
PDF file
AMAndrea Massaccesi
Andrea Massaccesi
GDGianluca Dassano
Gianluca Dassano
Paola PirinoliPaola Pirinoli
Paola Pirinoli
In this paper, the design of a beam scanning, 3D-printed dielectric Transmitarray (TA) working in Ka-band is discussed. Thanks to the use of an innovative three-layer dielectric unit-cell that exploits tapered sections to enhance the bandwidth, a 50 × 50 elements transmitarray with improved scanning capabilities and wideband behavior has been designed and experimentally validated. The measured radiation performances over a scanning coverage of ±27 ∘ shown a variation of the gain lower than 2.9 dB and a 1-dB bandwidth in any case higher than 23%. The promising results suggest that the proposed TA technology is a valid alternative to realize a passive multibeam antenna, with the additional advantage that it can be easily manufactured using 3D-printing techniques.

1 November 2023 in Electronics
Verified
Journal Article
Open access
PDF file
Angelo FreniAngelo Freni
Angelo Freni
Michele BeccariaMichele Beccaria
Michele Beccaria
AMAgnese Mazzinghi
Agnese Mazzinghi
AMAndrea Massaccesi
Andrea Massaccesi
Paola PirinoliPaola Pirinoli
Paola Pirinoli
This paper explores the possibility of integrating a smart electromagnetic skin into a street light or traffic light pole to enhance the coverage of a 5G base station operating in the millimeter-waves frequency band with the consequent improvement of the wireless network performance. Specifically, the electromagnetic characteristics of a curved smart electromagnetic skin, which can be easily integrated into a cylindrical radome enclosing the pole, have been analyzed and compared with those of a planar solution. Additionally, the coverage provided by a curved smart electromagnetic skin in a real urban scenario has been considered. The obtained results confirm that using a curved smart electromagnetic skin is both feasible and convenient from several points of view: it guarantees better performance than a planar configuration occupying the same volume, it is simpler to mount and it has a lower visual impact.

8 September 2020 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
Alessandro NiccolaiAlessandro Niccolai
Alessandro Niccolai
Michele BeccariaMichele Beccaria
Michele Beccaria
RZRiccardo E. Zich
Riccardo E. Zich
AMAndrea Massaccesi
Andrea Massaccesi
PPPaola Pirinoli
Paola Pirinoli
Evolutionary algorithms can be successfully exploited for carrying on an effective design of beam-scanning passive reflectarrays, even if the problem is highly non-linear and multimodal. In this paper, the Social Network Optimization (SNO) algorithm has been used for assessing an effective design procedure of a beam-scanning passive reflectarray (RA). For exploiting at most the optimization capabilities of SNO, the entire optimization environment has been deeply analyzed in all its parts. The performance of SNO and the beam-scanning capabilities of the optimized RA have been assessed through the comparison with other well established Evolutionary Algorithms.

15 August 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AMAndrea Massaccesi
Andrea Massaccesi
Valentina BertanaValentina Bertana
Valentina Bertana
Michele BeccariaMichele Beccaria
Michele Beccaria
SMSimone Luigi Marasso
Simone Luigi Marasso
MCMatteo Cocuzza
Matteo Cocuzza
Paola PirinoliPaola Pirinoli
Paola Pirinoli
In this paper, a dielectric-only reflectarray with a wideband behavior is proposed as an alternative to conventional metallo-dielectric configurations. The introduced unit-cell consists of a single dielectric layer perforated with a square hole located at the center, whose size is used to control the phase of the reflection coefficient. For such a dielectric element, an accurate equivalent circuit model for predicting the reflection coefficient is derived by combining two different concepts: the effective medium theory used to characterize the effective permittivity, and the Floquet modal expansion to describe the wave propagation in terms of Floquet modes. The unit-cell geometrical parameters are then optimized to maximize the reflectarray performance, taking also into account the limitations introduced by the additive manufacturing process adopted for the realization of a prototype. Its experimental characterization confirms the effectiveness of the unit-cell, of the design and manufacturing procedures: in fact, the measurements, in very good agreement with the results of the simulations, prove the significantly low side lobe levels, the good aperture efficiency and the excellent 1-dB bandwidth, larger than 24%.

1 July 2018
Verified
Conference Paper
Closed access
MBMichele Beccaria
Michele Beccaria
AMAndrea Massaccesi
Andrea Massaccesi
PPPaola Pirinoli
Paola Pirinoli
LMLinh Ho Manh
Linh Ho Manh
In this paper, preliminary results on the feasibility of a multibeam antenna based on the use of a transmitarray are presented. A reduced size configuration has been properly designed and optimized, with the aim to minimize the degradation of the radiation pattern introduced by the variation in the direction of maximum radiation. Thereafter, the numerical analysis of the obtained antenna has been performed.