The lack of inertia and damping mechanism of photovoltaic (PV) grid-connected systems controlled by maximum power point tracking (MPPT) poses a challenge for the safety and stability of the grid. Virtual synchronous generator (VSG) technology has attracted wide attention, since it can make PV grid-connected inverter present the external characteristics of a synchronous generator (SG). Nevertheless, traditional PV-VSG is generally equipped with an energy storage device, which leads to many problems, such as increased costs, space occupation, and post-maintenance. Thus, this paper proposes a two-stage improved PV-VSG control method based on an adaptive-MPPT algorithm. When PV power is adequate, the adaptive-MPPT allows the PV to change the operating point within a stable operation area to actualize system supply-demand, matching in accordance to the load or dispatching power demand; when PV power is insufficient, PV achieves traditional MPPT control to reduce power shortage; simultaneously, improved VSG control prevents the DC bus voltage from falling continuously to ensure its stability. The proposed control approach enables the two-stage PV-VSG to supply power to loads or connect to the grid without adding additional energy storage devices, the effectiveness of which in off-grid and grid-connected modes is demonstrated by typical simulation conditions.

Performance status evaluation is essential for the safe running of electric vehicle (EV) charging infrastructure. With the development of the EV industry, the EV charging infrastructure industry has advanced considerably. Safe and reliable operation of the charging infrastructure is important for the development of EVs. As such, we propose a comprehensive evaluation method to assess the performance condition of an EV charging infrastructure. First, based on the analysis of the existing EV charging principles, we established an evaluation index system for EV charging infrastructure. Second, the subjective weight, objective weight, and comprehensive weight of the index system were determined through analytic hierarchy processes (AHP) and the entropy weight method. Then, we used fuzzy comprehensive evaluation to appraise the performance of the charging infrastructure through expert investigation. Finally, based on the actual data from an EV charger, the performance conditions of the EV charging infrastructure were evaluated to demonstrate the feasibility of the method and the reliability of the index system.

With the development of electric vehicles in China, the impact of the electrical performance of electric vehicle charging equipment on electric vehicle battery can not be ignored. A test system for the field test of off-board charger electrical performance is presented in this paper. The test system is composed of hardware devices and control system. The hardware devices include a power module, a load module, a measurement module, and a protection module. The load module uses a lightweight controllable charging load to reduce the weight and volume of test system for field test needs. The control system can control the test process and analysis test data. Taking the stabilized voltage precision test as an example, an off-board charger is tested and the test results are analyzed in this paper.