It is very hard to realize a 6-bit resolution millimeter-wave phase shifter whether by passive structure or by active structure. A 52-57 GHz 6-bit phase shifter with hybrid of passive and active structures is proposed. The switched LC phase shifter is adopted for the passive structure because of its compact size, and the vector-sum phase shifter is chosen for the active structure in the 6-bit phase shifter. The proposed 6-bit phase shifter uses the passive structure to realize 5.625° and 11.25° phase shifts and uses the active structure to realize the N x 22.5° phase shifts. Implemented in Taiwan Semiconductor Manufacturing Company 40-nm CMOS technology, the 6-bit phase shifter has a RMS error <3.76° and a RMS gain error <2.23 dB at 52-57 GHz. The proposed 6-bit millimeter-wave phase shifter achieves a high phase resolution with a compact size. The core die occupies an area of 500 μm x 300 μm and consumes about 13 mA from a 1.1-V supply.
12 November 2019 in IEEE Journal of Solid-State Circuits
This article presents a new design methodology of a reconfigurable dual-band output matching network with high efficiency. The implemented output matching network achieves a passive efficiency of 71.6% and 75% at 2.4 and 5.5 GHz, respectively. Based on the proposed output matching network, a transmitter and a standalone power amplifier (PA) supporting 2.4-/5-GHz dual-band operation for the emerging wireless local area network (WLAN) 802.11ax application are designed and fabricated in 40-nm CMOS technology. In 2.4- and 5-GHz WLAN bands, the PA achieves a Psat of 23 and 21.9-22.4 dBm with power-added efficiency (PAE) of 27% and 24.2%-28.2%, respectively. At 2.442 GHz, the transmitter delivers 8.1-dBm average output power for 40-MHz, 1024-quadrature amplitude modulation (QAM) 802.11ax signal while meeting the standard specification of error vector magnitude (EVM) below - 35 dB. In 5-GHz operating mode, the transmitter achieves an average output power of 6.72-6.95 dBm with the EVM of - 35 dB for 80-MHz, 1024-QAM 802.11ax signal. The PA and transmitter front end are the first published designs for dual-band WLAN 802.11ax application in the literature.
3 June 2025 in IEEE Transactions on Instrumentation and Measurement
Precise jitter identification and extraction are critical for jitter decomposition, fault diagnosis, and bit error rate estimation in high-speed serial communications. Conventional methods depend on decision threshold and clock recovery, which discard significant signal information, as only threshold crossing points are considered. Additionally, the accuracy of jitter extraction is sensitive to errors introduced by histogram-based statistical computations and interpolation processes. This paper presents a novel jitter extraction method based on a signal transmission model that fully exploits the cyclostationary characteristics of the signal. By utilizing all signal points rather than just threshold crossings, this method eliminates the presetting modules and avoids statistical computations or interpolations, resulting in a simpler implementation and lower complexity. A theoretical model is developed to demonstrate that the phase of the cyclic autocorrelation function at the symbol rate frequency intrinsically encodes the jitter information for each symbol. The time interval error jitter can be extracted by computing the phase via the fast Fourier transform, followed by least squares correction to eliminate cumulative errors. Simulations under various jitter conditions validate the accuracy and robustness of the proposed method, showing comparable performance to conventional approaches while achieving superior accuracy in sinusoidal jitter scenarios. The effectiveness is further demonstrated through oscilloscope experiments, with relative errors below 1%, confirming its accuracy and practical applicability.
21 August 2020 in Microwave and Optical Technology Letters
To overcome the limitations of traditional bandpass filter design methods, which heavily rely on designer expertise and predefined topology, this paper proposes an inverse design methodology for microwave bandpass filter based on deep learning and genetic algorithms (GA). The filter structures are encoded as two-dimensional pixelated matrices, and a database is constructed through electromagnetic (EM) simulations. To reduce the computational cost of EM simulation, the dataset is further expanded using symmetry, mirroring, and rotation techniques. A convolutional neural network (CNN) is trained to model the mapping between S-parameters and arbitrary pixelated structural matrices, thereby broadening the design space. Subsequently, an improved GA is employed to synthesize filter structure that meets specific frequency response requirement. A filter operating within 0.5-2.08 GHz is successfully synthesized, fabricated, and measured. The experimental results demonstrate that the proposed filter achieves wide bandwidth, low insertion losses and good spurious rejection (20 dB @5.03f0), benefiting from the removal of constraints imposed by predefined topology.