Alcohols (bioalcohols) is a class of chemicals that are used as a feedstock for the manufacturing of a large number of valuable intermediates in industrially important processes. Currently, sustainable technologies for selective conversion of alcohols utilize “green” oxidants, mainly, ambient air or oxygen. Due to the high affinity of oxygen towards silver, the latter serves as an active component of supported heterogeneous catalysts. In this review, we consider Ag-based catalysts that participate in gas- or liquid-phase oxidation of alcohols. Oxidation of methanol, ethanol, ethylene glycol, propylene glycol, glycerol, benzyl and allyl alcohols is mostly considered. A particular attention is paid to selective photooxidation of alcohols over Ag-based catalysts. We discuss the catalyst composition in terms of (1) the state of the active component, (2) the nature of the substrate, (3) support nature, and (4) the strength of the metal–support interactions.

Characteristics and catalytic activity in hydrogen production from formic acid of Au catalysts supported on porous N-free (Au/C) and N-doped carbon (Au/N-C) have been compared with those of Au/SiO₂ and Au/Al₂O₃ catalysts. Among the catalysts examined, the Au/N-C catalyst showed the highest Au mass-based catalytic activity. The following trend was found at 448 K: Au/N-C > Au/SiO₂ > Au/Al₂O₃, Au/C. The trend for the selectivity in hydrogen production was different: Au/C (99.5%) > Au/Al₂O₃ (98.0%) > Au/N-C (96.3%) > Au/SiO₂ (83.0%). According to XPS data the Au was present in metallic state in all catalysts after the reaction. TEM analysis revealed that the use of the N-C support allowed obtaining highly dispersed Au nanoparticles with a mean size of about 2 nm, which was close to those for the Au catalysts on the oxide supports. However, it was by a factor of 5 smaller than that for the Au/C catalyst. The difference in dispersion could explain the difference in the catalytic activity for the carbon-based catalysts. Additionally, the high activity of the Au/N-C catalyst could be related to the presence of pyridinic type nitrogen on the N-doped carbon surface, which activates the formic acid molecule forming pyridinium formate species further interacting with Au. This was confirmed by density functional theory (DFT) calculations. The results of this study may assist the development of novel Au catalysts for different catalytic reactions.

The effect of nitrogen doped bamboo-like carbon nanotubes (N–CNTs) on the properties of supported platinum (0.2 and 1 wt %) catalysts in formic acid decomposition for hydrogen production was studied. It was shown that both impregnation and homogeneous precipitation routes led to the formation of electron-deficient platinum stabilized by pyridinic nitrogen sites of the N–CNTs. The electron-deficient platinum species strongly enhanced the activity and selectivity of the Pt/N–CNTs catalysts when compared to the catalysts containing mainly metallic platinum nanoparticles. A comparison of bamboo-like N–CNTs and herring-bone nitrogen doped carbon nanofibers (N–CNFs) as the catalyst support allowed us to conclude that the catalytic properties of supported platinum are determined by its locally one-type interaction with pyridinic nitrogen sites of the N–CNTs or N–CNFs irrespective of substantial structural differences between nanotubes and nanofibers.