The rise in prices of traditional energy sources, the high dependence of many countries on their import, and the associated need for security of supply have led to large investments in new capacity of wind power plants. Although wind power generation is a mature technology and levelized cost of electricity low, there is still room for its improvement. A review of available literature has indicated that wind turbine development in the coming decade will be based on upscaling wind turbines and minor design improvements. These include further improvements in rotor blade aerodynamics, active control of the rotor blade rotation system, and aerodynamic brakes that will lead to increased power generation efficiency. Improvements in system maintenance and early diagnosis of transmission and power-related faults and blade surface damage will reduce wind turbine downtime and increase system reliability and availability. The manufacture of wind turbines with larger dimensions presents problems of transportation and assembly, which are being addressed by manufacturing the blades from segments. Numerical analysis is increasingly being used both in wind turbine efficiency analysis and in stress and vibration analysis. Direct drive is becoming more competitive with traditional power transmission through a gearbox. The trend in offshore wind farms is to increase the size of wind turbines and to place them farther from the coast and in deeper water, which requires new forms of floating foundations. Due to the different work requirements and more difficult conditions of the marine environment, optimization methods for the construction of offshore substructures are currently being developed. There are plans to use 66-kV cables for power transmission from offshore wind farms instead of the current 33-kV cables. Offshore wind farms can play an important role in the transition to a hydrogen economy. In this context, significant capacity is planned for the production of “green” hydrogen by electrolysis from water. First-generation wind turbines are nearing the end of their service life, so strategies are being developed to repower them, extend their life or dismantle and recycle them.

We have had high expectations for using algae biodiesel for many years, but the quantities of biodiesel currently produced from algae are tiny compared to the quantities of conventional diesel oil. Furthermore, no comprehensive analysis of the impact of all factors on the market production of algal biodiesel has been made so far. This paper aims to analyze the strengths, weaknesses, opportunities, and threats associated with algal biodiesel, to evaluate its production prospects for the biofuels market. The results of the analysis show that it is possible to increase the efficiency of algae biomass production further. However, because the production of this biodiesel is an energy-intensive process, the price of biodiesel is high. Opportunities for more economical production of algal biodiesel are seen in integration with other processes, such as wastewater treatment, but this does not ensure large-scale production. The impact of state policies and laws is significant in the future of algal biodiesel production. With increasingly stringent environmental requirements, electric cars are a significant threat to biodiesel production. By considering all the influencing factors, it is not expected that algal biodiesel will gain an essential place in the fuel market.

In response to the problem of increasing climate change and energy security, investment in renewable energy sources has increased significantly both in Europe and globally. Wind and solar power plants are expected to be the largest contributors to global decarbonization, ranking first and second in projected capacity by 2050. As all power plants have a certain impact on the environment, so do PV power plants, and due to their planned large capacities, it is necessary to assess their impact on the environment. Improving the manufacturing technology of PV system components, increasing the efficiency of solar cells, and using materials that are less harmful to the environment will reduce these impacts. Manufacturing PV system components is a highly energy-intensive process that involves greenhouse gas emissions. As new renewable energy capacity is built, the amount of “green” electricity on the grid increases, reducing CO₂ emissions per kWh consumed. The objective of this paper is to analyze the current status of the environmental impact of PV power plants under these changing conditions in terms of CO₂ emissions, land use, pollutant and noise emissions, and water consumption. The capacity installed to date will reach the end of its lifetime by 2050, which means that the amount of waste associated with it will increase over time. This can have a significant impact on the environment, which is why part of the work is dedicated to this problem. In addition to the available information from the literature, the authors also made their own estimates of land use based on data on newly installed PV power plants and PV modules available on the market. The results of the analysis show that there is enough land both in Europe and worldwide to install the planned capacities of rooftop and ground-mounted PV power plants. CO₂ emissions are at the same level as for concentrated solar power, with a decreasing trend. Pollutant emissions, noise, and water consumption are not major problems compared to other types of power plants. Overall, it can be concluded that the expansion of PV capacity has a very positive impact on the environment.

We are witnessing significant climatic changes and increasingly frequent extreme weather conditions affecting every part of the globe. In order to reduce and stop these unfavourable climate changes, there has been a shift to the use of renewables, and in this sense, a significant contribution of the photovoltaic (PV) power plant is planned. This paper analyses the safety, reliability, and resilience of PV systems to extreme weather conditions such as wind storms, hail, lightning, high temperatures, fire, and floods. In addition to using available information from the literature, temperature measurements were also carried out on the rooftop PV power plant in Slavonski Brod, as well as a numerical stress analysis at extreme wind speeds using Ansys software. The results of the analysis show that existing PV systems are very resilient to extreme weather conditions. Utility-scale PV systems can usually withstand wind speeds of up to 50 m/s without any problems, and only at higher speeds do local stresses occur in certain parts of the structure that are higher than permissible. Resistance to hail is also very high, and manufacturers guarantee resistance to hail up to 25 mm in size. At high air temperatures, the temperature of the panel frame can reach about 70 °C, the panel temperature up to 85 °C, and the temperature of the cable insulation over 60 °C, as measurements have shown. Such high temperatures lead to a drop in electricity production up to 30% but do not pose a fire hazard to the cables and the roof if the roof insulation is conducted correctly. Forest fires do not usually pose a direct threat to PV systems, but the smoke that spreads over a large area reduces the solar radiation reaching the PV panel. It can also cause an unfavourable “wiggle effect”. Lightning strikes to a PV panel are not common, although they are possible. With built-in safeguards, no major damage should occur. Flooding is always a possibility, but with properly designed drainage systems, the damage is minimal in most cases.

Modules based on c-Si cells account for more than 90% of the photovoltaic capacity installed worldwide, which is why the analysis in this paper focusses on this cell type. This study provides an overview of the current state of silicon-based photovoltaic technology, the direction of further development and some market trends to help interested stakeholders make decisions about investing in PV technologies, and it can be an excellent incentive for young scientists interested in this field to find a narrower field of research. This analysis covers all process steps, from the production of metallurgical silicon from raw material quartz to the production of cells and modules, and it includes technical, economic and environmental aspects. The economic aspect calls for more economical production. The ecological aspect looks for ways to minimise the negative impact of cell production on the environment by reducing emissions and using environmentally friendly materials. The technical aspect refers to the state of development of production technologies that contribute to achieving the goals of the economic, environmental and sustainability-related aspects. This involves ways to reduce energy consumption in all process steps, cutting ingots into wafers with the smallest possible cutting width (less material waste), producing thin cells with the greatest possible dimensional accuracy, using cheaper materials and more efficient production. An extremely important goal is to achieve the highest possible efficiency of PV cells, which is achieved by reducing cell losses (optical, electrical, degradation). New technologies in this context are Tunnel Oxide Passivated Contact (TOPcon), Interdigitated Back Contact Cells (IBCs), Heterojunction Cells (HJTs), Passivated Emitter Rear Totally Diffused cells (PERTs), silicon heterojunction cells (SHJs), Multi-Bush, High-Density Cell Interconnection, Shingled Cells, Split Cells, Bifacial Cells and others. The trend is also to increase the cell size and thus increase the output power of the module but also to reduce the weight of the module per kW of power. Research is also focused to maximise the service life of PV cells and minimise the degradation of their operating properties over time. The influence of shade and the increase in cell temperature on the operating properties should preferably be minimised. In this context, half-cut and third-cut cell technology, covering the cell surface with a layer that reduces soiling and doping with gallium instead of boron are newer technologies that are being applied. All of this leads to greater sustainability in PV technology, and solar energy becomes more affordable and necessary in the transition to a “green” economy.

Wind energy is an important renewable energy source, and artificial intelligence (AI) plays an important role in improving its efficiency, reliability and cost-effectiveness while minimizing its environmental impact. Based on an analysis of the latest scientific literature, this article examines AI applications for the entire life cycle of wind turbines, including planning, operation and decommissioning. A key focus is on AI-driven maintenance, which reduces downtime, improves reliability and extends the lifetime of the turbines. AI also optimizes the design of wind turbines, particularly in the development of aerodynamically efficient blade shapes through rapid design iterations. In addition, AI helps to reduce the impact on the environment, e.g., by reducing bird collisions, and improves wind energy forecasting, which is essential for balancing energy flows in power systems. Despite its benefits, AI applications face challenges, including algorithmic errors, data accuracy, ethical concerns and cybersecurity risks. Further testing and validation of AI algorithms is needed to ensure their effectiveness in advancing wind energy systems.