To solve problems of brightness and detail information loss in infrared and visible image fusion, an effective infrared and visible image fusion method using rolling guidance filtering and gradient saliency map is proposed in this paper. The rolling guidance filtering is used to decompose the input images into approximate layers and residual layers; the energy attribute fusion model is used to fuse the approximate layers; the gradient saliency map is introduced and the corresponding weight matrices are constructed to perform on residual layers. The fusion image is generated by reconstructing the fused approximate layer sub-image and residual layer sub-images. Experimental results demonstrate the superiority of the proposed infrared and visible image fusion method.

O₃ poses a significant threat to human health and the ecological environment. In recent years, O₃ pollution has become increasingly serious, making it difficult to accurately control O₃ precursor emissions. Satellite indicator methods, such as the FNR (formaldehyde-to-nitrogen dioxide ratio (HCHO/NO₂ ratio)), provide an effective way to identify ozone pollution control areas on a large geographical scale due to their simple acquisition of datasets. This can help determine the primary factors contributing to O₃ pollution and assist in managing it. Based on TROPOMI data from May 2018 to December 2022, combined with ground-based monitoring data from the China National Environmental Monitoring Centre, we explored the uncertainty associated with using the HCHO/NO₂ ratio (FNR) as an indicator in ozone control area determination. We focused on the four representative regions in China: Jing-Jin-Ji-Lu-Yu (JJJLY), Jiang-Zhe-Hu-Wan (JZHW), Chuan-Yu (CY), and South China. By using the statistical curve-fitting method, we found that the FNR thresholds were 3.5–5.1, 2.0–4.0, 2.5–4.2, and 1.7–3.5, respectively. Meanwhile, we analyzed the spatial and temporal characteristics of the HCHO, NO₂, and O₃ control areas. The HCHO concentrations and NO₂ concentrations had obvious cyclical patterns, with higher HCHO column densities occurring in summer and higher NO₂ concentrations in winter. These high values always appeared in areas with dense population activities and well-developed economies. The distribution characteristics of the ozone control areas indicated that during O₃ pollution periods, the urban areas with industrial activities and high population densities were primarily controlled by VOCs, and the suburban areas gradually shifted from VOC-limited regimes to transitional regimes and eventually reverted back to VOC-limited regimes. In contrast, the rural and other remote areas with relatively less development were mainly controlled by NOx. The FNR also exhibited periodic variations, with higher values mostly appearing in summer and lower values appearing in winter. This study identifies the main factors contributing to O₃ pollution in different regions of China and can serve as a valuable reference for O₃ pollution control.

Due to the advantage of geostationary satellites, Himawari-8/AHI can provide near-real-time air quality monitoring over China with a high temporal resolution. Satellite-based aerosol optical depth (AOD) retrieval over land is a challenge because of the large surface contribution to the top of atmosphere (TOA) signal and the uncertainty of aerosol modes. Here, by combining satellite TOA reflectance, sun-sensor geometries, meteorological factors and vegetation information, we propose a data-driven AOD detection algorithm based on a deep neural network (DNN) model for Himawari-8/AHI. It is trained by sample data of 2018 and 2019 and is applied to derive hourly AODs over China in 2020. By comparison with ground-based AERONET measurements, R² for DNN-estimated AOD is up to 0.8702, which is much higher than that for the AHI AOD product with R² = 0.4869. The hourly AOD results indicate that the DNN model has a good potential in improving the performance of AOD retrieval in the early morning and in the late afternoon, and the spatial distribution is reliable for capturing the variation of aerosol pollution on the regional scale. By analyzing different DNN modeling strategies, it is found that seasonal modeling can hardly increase the accuracy of AOD retrieval to a certain extent, and R² increases from 0.7394 to 0.8168 when meteorological features, especially air pressure, are involved in the model training.

Quantifying spatiotemporal polar ozone changes can promote our understanding of global stratospheric ozone depletion, polar ozone-related chemical processes, and atmospheric dynamics. By means of ground-level measurements, satellite observations, and re-analyzed meteorology, the global spatial and temporal distribution characteristics of the total column ozone (TCO) and ozone profile can be quantitatively described. In this study, we evaluated the ozone datasets from CrIS/NOAA20, AIRS/Aqua, and ERA5/ECWMF for their performance in polar regions in 2020, along with the in situ observations of the Dobson, Brewer, and ozonesonde instruments, which are regarded as benchmarks. The results showed that the ERA5 reanalysis ozone field had good consistency with the ground observations (R > 0.95) and indicated whether the TCO or ozone profile was less affected by the site location. In contrast, both CrIS and AIRS could capture the ozone loss process resulting from the Antarctic/Arctic ozone hole at a monthly scale, but their ability to characterize the Arctic ozone hole was weaker than in the Antarctic. Specifically, the TCO values derived from AIRS were apparently higher in March 2020 than those of ERA5, which made it difficult to assess the area and depth of the ozone hole during this period. Moreover, the pattern of CrIS TCO was abnormal and tended to deviate from the pattern that characterized ERA5 and AIRS at the Alert site during the Arctic ozone loss process in 2020, which demonstrates that CrIS ozone products have limited applicability at this ground site. Furthermore, the validation of the ozone profile shows that AIRS and CrIS do not have good vertical representation in the polar regions and are not able to characterize the location and depth of ozone depletion. Overall, the results reveal the shortcomings of the ozone profiles derived from AIRS and CrIS observations and the reliability of the ERA5 reanalysis ozone field in polar applications. A more suitable prior method and detection sensitivity improvement on CrIS and AIRS ozone products would improve their reliability and applicability in polar regions.

Crop residue open burning has significant adverse effects on regional air quality, climate change, and human health. Emissions from crop residue open burning estimated by satellites are underestimated in central China due to long-term cloud cover and the limitation of spatial-temporal resolution of satellites. In this study, we used a statistical-based method to investigate the crop residue open burning emissions in central China from 2012 to 2020. The open burning proportion (OBP) of residue, updated annually by the Visible Infrared Imaging Radiometer Suite (VIIRS) 375 m active fire product (VNP14IMG), and the latest observed emission factors (EF_S) were used to improve the accuracy of the estimated emissions. Annual emissions of pollutants were allocated into 0.1° × 0.1° spatial grid cells using fire counts and land cover data. The results showed that the total emissions of black carbon (BC), organic carbon (OC), sulfur dioxide (SO₂), nitric oxide (NO_X), carbon monoxide (CO), carbon dioxide (CO₂), fine particles (PM_2.5), coarse particles (PM₁₀), ammonia (NH₃), methane (CH₄) and non-methane volatile organic compound (NMVOC) were 34.84, 149.72, 41.06, 90.11, 2640.97, 78,094.91, 485.17, 481.05, 35.21, 246.38 and 499.59 Gg, respectively. The largest contributor of crop residue open burning was rice, followed by wheat, rapeseed and corn, with the contribution rates of 35.34–64.07%, 15.78–34.71%, 9.12–25.56%, and 5.69–14.06%, respectively. The pollutants emissions exhibit large annual variation, with the highest emissions in 2013 and a remarkable decrease from 2013 to 2015 under strict control measures. Since 2015, the emissions remained at a low level, which shows that air quality control policies play a role in recent years. The result indicates that using OBP updated by satellite active fire product in a statistical-based method can help to get more accurate and reliable multi-year emissions.

In this paper, a multi-focus image fusion algorithm via the distance-weighted regional energy and structure tensor in non-subsampled contourlet transform domain is introduced. The distance-weighted regional energy-based fusion rule was used to deal with low-frequency components, and the structure tensor-based fusion rule was used to process high-frequency components; fused sub-bands were integrated with the inverse non-subsampled contourlet transform, and a fused multi-focus image was generated. We conducted a series of simulations and experiments on the multi-focus image public dataset Lytro; the experimental results of 20 sets of data show that our algorithm has significant advantages compared to advanced algorithms and that it can produce clearer and more informative multi-focus fusion images.