An orchard variable-rate sprayer applies the appropriate amount of plant protection products only where they are needed based on detection data from advanced sensors, a system that has attracted increasing attention. The latest developments in the detection unit, variable control unit, and signal-processing algorithm of the variable-rate sprayer are discussed. The detection of target position and volume is realized with an ultrasonic sensor, a laser scanning sensor, or other methods. The technology of real-time acquisition of foliage density, plant diseases and pests and their severity, as well as meteorological parameters needs further improvements. Among the three variable-flow-rate control units, pulse width modulation was the most widely used, followed by pressure-based, and variable concentration, which is preliminarily verified in the laboratory. The variable air supply control unit is tested both in the laboratory and in field experiments. The tree-row-volume model, the leaf-wall-area model, and the continuous application mode are widely used algorithms. Advanced research on a variable-rate sprayer is analyzed and future prospects are pointed out. A laser-based variable-rate intelligent sprayer equipped with pulse width modulation solenoid valves to tune spray outputs in real time based on target structures may have the potential to be successfully adopted by growers on a large scale in the foreseeable future. It will be a future research direction to develop an intelligent multi-sensor-fusion variable-rate sprayer based on target crop characteristics, plant diseases and pests and their severity, as well as meteorological conditions while achieving multi-variable control.

Precision variable rate spray is one of the research hotspots in the field of modern agriculture spraying applications. Variable rate spraying of the canopy allows growers to apply adjusted volume rate of pesticides to the target, based on canopy size, and to apply plant protection products in an economical and environmentally sound manner. In the field of pesticide application, knowledge of the geometrical characteristics of plantations will guarantee a better adjustment of the dosage of the agrochemicals applied. This technology is integrated with intelligent real-time sensors, which have a high potential for agricultural precision spray applications. This book chapter presents the foundations and applications in agriculture of the primary systems used for real-time spray target detection of the geometrical characterization of tree plantations. Systems based on infrared, ultrasonic, light detection and ranging (LIDAR), and stereo vision sensors were discussed, respectively, on their performances to detect spray targets. Among them, laser scanners and stereo vision systems are probably the most promising and complementary techniques for achieving three-dimensional (3D) pictures and maps of plants and canopies. The advantages of data fusion applied in real-time target detection and its accuracy in density estimation of the plants were stressed.

Air-assisted boom sprayer is proven to be one of the best pesticide application methods to achieve uniform deposition of droplets in the canopy and improve the effective utilization of pesticides. However, the air flow velocity, air flow volume and air flow direction of the orchard sprayer should match the characteristic parameters of the target canopy, equipment spraying parameters and meteorological conditions so as to improve the spraying quality and reduce environmental pollution. This paper elaborates on the research status of air-assisted field sprayers and orchard sprayers, summarizes the research methods of air-assisted sprayers in four aspects, including experimental verification, theoretical analysis, simulation and structural optimization, and clarifies the advantages and disadvantages of these methods. It also presents two future research and development trends, including the intelligent, precise dynamic regulation of air flow velocity, air flow volume and air flow direction and the instant feedback of spraying quality, hoping to provide a reference for the research of air-assisted spray technology and equipment.