Mariusz Kamiński

Dr. Mariusz Kamiński

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 May 2019 in Coatings
Verified
Journal Article
Open access
PDF file
Mirosław SzalaMirosław Szala
Mirosław Szala
Mariusz WalczakMariusz Walczak
Mariusz Walczak
KPKamil Pasierbiewicz
Kamil Pasierbiewicz
Mariusz KamińskiMariusz Kamiński
Mariusz Kamiński
The resistance to cavitation erosion and sliding wear of stainless steel grade AISI 304 can be improved by using physical vapor deposited (PVD) coatings. The aim of this study was to investigate the cavitation erosion and sliding wear mechanisms of magnetron-sputtered AlTiN and TiAlN films deposited with different contents of chemical elements onto a stainless steel SS304 substrate. The surface morphology and structure of samples were examined by optical profilometry, light optical microscopy (LOM) and scanning electron microscopy (SEM-EDS). Mechanical properties (hardness, elastic modulus) were tested using a nanoindentation tester. Adhesion of the deposited coatings was determined by the scratch test and Rockwell adhesion tests. Cavitation erosion tests were performed according to ASTM G32 (vibratory apparatus) in compliance with the stationary specimen procedure. Sliding wear tests were conducted with the use of a nano-tribo tester, i.e., ball-on-disc apparatus. Results demonstrate that the cavitation erosion mechanism of the TiAlN and AlTiN coatings rely on embrittlement, which can be attributed to fatigue processes causing film rupture and internal decohesion in flake spallation, and thus leading to coating detachment and substrate exposition. At moderate loads, the sliding wear of thin films takes the form of grooving, micro-scratching, micro-ploughing and smearing of the columnar grain top hills. Compared to the SS reference sample, the PVD films exhibit superior resistance to sliding wear and cavitation erosion.

29 April 2021 in Materials
Verified
Journal Article
Open access
PDF file
Mirosław SzalaMirosław Szala
Mirosław Szala
DCDariusz Chocyk
Dariusz Chocyk
ASAnna Skic
Anna Skic
Mariusz KamińskiMariusz Kamiński
Mariusz Kamiński
Wojciech MacekWojciech Macek
Wojciech Macek
MTMarcin Turek
Marcin Turek
From the wide range of engineering materials traditional Stellite 6 (cobalt alloy) exhibits excellent resistance to cavitation erosion (CE). Nonetheless, the influence of ion implantation of cobalt alloys on the CE behaviour has not been completely clarified by the literature. Thus, this work investigates the effect of nitrogen ion implantation (NII) of HIPed Stellite 6 on the improvement of resistance to CE. Finally, the cobalt-rich matrix phase transformations due to both NII and cavitation load were studied. The CE resistance of stellites ion-implanted by 120 keV N+ ions two fluences: 5 × 1016 cm−2 and 1 × 1017 cm−2 were comparatively analysed with the unimplanted stellite and AISI 304 stainless steel. CE tests were conducted according to ASTM G32 with stationary specimen method. Erosion rate curves and mean depth of erosion confirm that the nitrogen-implanted HIPed Stellite 6 two times exceeds the resistance to CE than unimplanted stellite, and has almost ten times higher CE reference than stainless steel. The X-ray diffraction (XRD) confirms that NII of HIPed Stellite 6 favours transformation of the ε(hcp) to γ(fcc) structure. Unimplanted stellite ε-rich matrix is less prone to plastic deformation than γ and consequently, increase of γ phase effectively holds carbides in cobalt matrix and prevents Cr7C3 debonding. This phenomenon elongates three times the CE incubation stage, slows erosion rate and mitigates the material loss. Metastable γ structure formed by ion implantation consumes the cavitation load for work-hardening and γ → ε martensitic transformation. In further CE stages, phases transform as for unimplanted alloy namely, the cavitation-inducted recovery process, removal of strain, dislocations resulting in increase of γ phase. The CE mechanism was investigated using a surface profilometer, atomic force microscopy, SEM-EDS and XRD. HIPed Stellite 6 wear behaviour relies on the plastic deformation of cobalt matrix, starting at Cr7C3/matrix interfaces. Once the Cr7C3 particles lose from the matrix restrain, they debond from matrix and are removed from the material. Carbides detachment creates cavitation pits which initiate cracks propagation through cobalt matrix, that leads to loss of matrix phase and as a result the CE proceeds with a detachment of massive chunk of materials.

7 May 2019 in Sensors
Verified
Journal Article
Open access
PDF file
JPJaroslaw Pytka
Jaroslaw Pytka
PBPiotr Budzyński
Piotr Budzyński
Mariusz KamińskiMariusz Kamiński
Mariusz Kamiński
TŁTomasz Łyszczyk
Tomasz Łyszczyk
Jerzy JózwikJerzy Józwik
Jerzy Józwik
This paper presents examples of the application of the TDR (Time-Domain Reflectometry) sensor in terramechanical research. Examples include the determination of soil moisture content during off-road vehicle mobility tests, the determination of snow density before and after the wheeling of a snow grooming machine and an airplane, as well as the monitoring of turf moisture on a grassy airfield for the analysis and prediction of safe and efficient flight operations (takeoff and landing). A handheld TDR meter was used in these experiments. Soil moisture data were correlated with the vehicle mobility index and a simple model for this correlation was derived. Using grassy airfield research, soil moisture data were related to meteorological impacts (precipitation, sunlight, etc.). Generally, it was concluded that the TDR meter, in its handheld version, was a useful tool in the performed research, but a field sensor that operates autonomically would be an optimal solution for the subject applications.

1 December 2015 in Vacuum
Verified
Journal Article
Closed access
PBPiotr Budzyński
Piotr Budzyński
LKL. Kara
L. Kara
TKT. Küçükömeroğlu
T. Küçükömeroğlu
Mariusz KamińskiMariusz Kamiński
Mariusz Kamiński

19 April 2019 in Preprints.org
Verified
Preprint
Open access
Mirosław SzalaMirosław Szala
Mirosław Szala
MWMariusz Walczak
Mariusz Walczak
KPKamil Pasierbiewicz
Kamil Pasierbiewicz
Mariusz KamińskiMariusz Kamiński
Mariusz Kamiński
Stainless steel grade AISI 304 is one of the most widespread modern structural material, alas its sliding wear and cavitation wear resistance are limited. Thus, AlTiN and TiAlN coatings can be deposited for increasing the resistance to wear of stainless steel components. The aim of the work was to investigate the cavitation erosion and sliding wear mechanisms of magnetron sputtered AlTiN and TiAlN coatings deposited on SS304 stainless steel. Films surface morphology and structure were examined using a profilometer, light optical microscope (LOM) and scanning electron microscope (SEM). The mechanical properties (hardness, elastic modulus) were tested by nanoindentation tester. The adhesion of deposited coatings was determined by means of the scratch test and Rockwell test. Cavitation erosion tests were performed according to ASTM G32 (vibratory apparatus) with stationary specimen procedure. Sliding wear tests were conducted using a nano-tribo testes i.e. ball-on-disc apparatus. Wear mechanisms are strongly contingent upon the structure and morphology of the tested materials. In relation to stainless steel substrate, the PVD films present a superior resistance to sliding wear and cavitation erosion. Higher resistance was noticed for AlTiN than for TiAlN film, mainly due to its superior hardness and elastic modulus. Cavitation erosion mechanism of both, AlTiN and AlTiN coatings is prone to embrittlement, imputable to fatigue processes that result in coating rupture and spallation that consist in coating fragmentation, formation of pits and finally detachment from the substrate. Additionally, films nanoindentation results measured before and after cavitation testing indicate changes in coatings structure, that acknowledged wear mechanism that starts with coating internal delamination in flake spallation mode. In contrary to PVD coatings, steel substrate is characterized by developed cavitation erosion wear with roughened surface and plastically deformed, semi-brittle, eroded surface. Sliding wear of thin films is based on micro-ploughing mechanism. For stainless steel adhesive sliding wear mode and plastic deformation with smearing, material transfer and grooving were observed. It was confirmed that various fluid machinery components made from austenitic stainless steel that undergo cavitation erosion, can be prevented by deposition of AlTiN and TiAlN films.

11 December 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
APAlexander Pogrebnjak
Alexander Pogrebnjak
VBVolodymyr Buranych
Volodymyr Buranych
VIVolodymyr Ivashchenko
Volodymyr Ivashchenko
SBSvitlana Borba-Pogrebnjak
Svitlana Borba-Pogrebnjak
OMOlga Maksakova
Olga Maksakova
YBYang Bing
Yang Bing
TiZrMoC coatings were deposited on Si(100) substrates using a DC dual magnetron sputtering. The composition was controlled by adjusting the sputtering parameters of the TiZrMo and graphite targets. The influence of graphite target current on the resulting coating properties was explored. TEM analysis revealed a single-phase structure with Ti/Mo/Zr substitutional elements, columnar grains, and a strong [111] texture. Nanotwins and stacking faults were prevalent within the nanocrystals. EDX, SIMS, XRD, and XPS analyses confirmed the elemental composition and nanostructure. Computational modeling was employed to investigate the mixing behavior of the quaternary solid solutions depending on the valency electron concentration. The films exhibited exceptional mechanical properties, including a maximum hardness of 35 GPa and a wear rate of 2.11 × 10−7 mm3N−1m−1, attributed to the presence of an amorphous carbon layer and optimized deposition parameters. These findings demonstrate the potential of TiZrMoC coatings for advanced applications requiring exceptional wear resistance and durability.