Fertilization is an essential element in plant cultivation. Supplying the right amounts of nutrients allows plants to grow and develop. Due to the rising price of mineral fertilizers, other fertilizers and soil conditioners are growing in importance. One of these is the digestate produced in agricultural biogas plants. Due to its properties, the digestate can be used directly as a fertilizer. In this case, the effects of application can both change the soil environment and directly affect plant growth. Physical, biological, and thermal transformations can also produce products based on the digestate or its fractions, which can be successfully used for fertilizer purposes. Among other things, this paper discusses the production and use of composts, biocarbon, and/or fertilizer granules from the solid fraction of the digestate. Numerous scientific studies, including the authors’ own research in this article, indicate that digestate can be successfully used as fertilizer, both without processing and with selected methods of treatment. However, further research is needed—especially on the diversity of raw materials used for biogas production and their effects on the composition and performance of the digestate. In addition, research should continue on the processing of digestate into specific products, depending on the needs of soils and plants.

Rapeseed is considered as one of the most important oilseed crops in the world. Vegetable oil obtained from rapeseed is a valuable raw material for the food and energy industry as well as for industrial applications. Compared to other vegetable oils, it has a lower concentration of saturated fatty acids (5%–10%), a higher content of monounsaturated fatty acids (44%–75%), and a moderate content of alpha-linolenic acid (9%–13%). Overall, rapeseed is grown in all continents on an industrial scale, so there is a growing need to predict yield before harvest. A combination of quantitative and qualitative data were used in this work in order to build three independent prediction models, on the basis of which yield simulations were carried out. Empirical data collected during field tests carried out in 2008–2015 were used to build three models, QQWR15_4, QQWR31_5, and QQWR30_6. Each model was composed of a different number of independent variables, ranging from 21 to 27. The lowest MAPE (mean absolute percentage error) yield prediction error corresponded to QQWR31_5, it was 6.88%, and the coefficient of determination R² was 0.69. As a result of the sensitivity analysis of the neural network, the most important independent variable influencing the final rapeseed yield was indicated, and for all the analyzed models it was “The kind of sowing date in the previous year” (KSD_PY).

The production of methane in the anaerobic digestion process is a proven technology, but it is characterized by low cost-effectiveness. The pretreatment of substrates seems to be a promising technology, which may increase the cost-effectiveness of biogas installations. The aim of the study was to investigate the influence of the comminution and extrusion of maize silage and maize straw silage on the course and yield of anaerobic digestion. The use of a pretreatment (comminution, extrusion) is justified when its energy balance is positive. The greatest increase in the methane yield per dry matter (12.4%) was observed after the extrusion of maize straw silage at 175 °C. The change in the methane yield resulting from the extrusion of maize silage and maize straw silage at 150 °C was small and amounted to 6.4% and 9%, respectively. The comminution caused an increase in the methane yield and accelerated the fermentation of substrates. The methane yield from maize silage was 38.4%, whereas the yield from maize straw silage was only 8.3%.

The objective of the present work was to determine the effect of pretreatment by extrusion on the biogas and biomethane yield of lignocellulosic substrates such as maize silage and maize straw silage. The biogas yields of the substrates before and after treatment were compared. Moreover, energy...

This study is an elaboration on the conference article written by the same authors, which presented the results of laboratory tests on the biogas efficiency of the following substrates: maize silage (MS), pig manure (PM), potato waste (PW), and sugar beet pulp (SB). This article presents methane yields from the same substrates, but also on a technical scale. Apart from that, it presents an original methodology of defining the Biochemical Methane Potential Correction Coefficient (BMPCC) based on the calculation of biomass conversion on an industrial scale and on a laboratory scale. The BMPCC was introduced as a tool to enable uncomplicated verification of the operation of a biogas plant to increase its efficiency and prevent undesirable losses. The estimated BMPCC values showed that the volume of methane produced in the laboratory was overestimated in comparison to the amount of methane obtained under technical conditions. There were differences observed for each substrate. They ranged from 4.7% to 17.19% for MS, from 1.14% to 23.58% for PM, from 9.5% to 13.69% for PW, and from 9.06% to 14.31% for SB. The BMPCC enables estimation of biomass under fermentation on an industrial scale, as compared with laboratory conditions.