Integrating the advantages of ultrahigh sensitivity, good breathability, low-cost and large-area fabrication processes, and facile integration with other functional devices is full of challenges for wearable pressure sensors. Here, a novel all-fabric piezoresistive pressure sensor is designed with a bottom interdigitated textile electrode screen-printed using silver paste and a top bridge of AgNW-coated cotton fabric. The entire fabrication process is facile, economical and suitable for large-scale integrated production. Benefiting from the highly porous microstructure, large surface roughness and ultra-low resistance of the conductive fabric, our piezoresistive pressure sensors show excellent detection performance, including an extra-high sensitivity of 2.46 × 104 kPa−1 to 5.65 × 105 kPa−1 over a wide pressure regime (0–30 kPa), a giant on/off ratio of ≈106, a fast response time (6 ms), and a low detection limit (0.76 Pa). Thanks to these merits, the devices not only have the ability to detect various tiny signals of the human body, but also can be widely applied in a human–computer interactive system as a real wearable sensor platform, which was demonstrated by playing the piano and computer games.
The reasonable design pattern of flexible pressure sensors with excellent performance and prominent features including high sensitivity and a relatively wide workable linear range has attracted significant attention owing to their potential application in the advanced wearable electronics and artificial intelligence fields. Herein, nano carbon black from kerosene soot, an atmospheric pollutant generated during the insufficient burning of hydrocarbon fuels, was utilized as the conductive material with a bottom interdigitated textile electrode screen printed using silver paste to construct a piezoresistive pressure sensor with prominent performance. Owing to the distinct loose porous structure, the lumpy surface roughness of the fabric electrodes, and the softness of polydimethylsiloxane, the piezoresistive pressure sensor exhibited superior detection performance, including high sensitivity (31.63 kPa−1 within the range of 0–2 kPa), a relatively large feasible range (0–15 kPa), a low detection limit (2.26 pa), and a rapid response time (15 ms). Thus, these sensors act as outstanding candidates for detecting the human physiological signal and large-scale limb movement, showing their broad range of application prospects in the advanced wearable electronics field.
The rational design of high-performance flexible pressure sensors with both high sensitivity and wide linear range attracts great attention because of their potential applications in wearable electronics and human-machine interfaces. Here, polyaniline nanofiber wrapped nonwoven fabric was used as the active material to construct high performance, flexible, all fabric pressure sensors with a bottom interdigitated textile electrode. Due to the unique hierarchical structures, large surface roughness of the polyaniline coated fabric and high conductivity of the interdigitated textile electrodes, the obtained pressure sensor shows superior performance, including ultrahigh sensitivity of 46.48 kPa−1 in a wide linear range (<4.5 kPa), rapid response/relaxation time (7/16 ms) and low detection limit (0.46 Pa). Based on these merits, the practical applications in monitoring human physiological signals and detecting spatial distribution of subtle pressure are demonstrated, showing its potential for health monitoring as wearable electronics.
Herein, a modified in situ sol–gel method was applied to prepare the Nafion/silica composite membrane with targeted filling of silica into ionic clusters. The low humidity (20–60% RH) proton conductivity of Nafion was therefore doubled at elevated temperatures (110–120 °C), and the high-temperature fuel cell performance was significantly improved by 45%.
1 January 2021 in International Journal of Hydrogen Energy