Concrete is the most widely used construction material nowadays. We are concerned with the computational modelling and laboratory testing of high-performance concrete (HPC). The idea of HPC is to enhance the functionality and sustainability of normal concrete, especially by its greater ductility as well as higher compressive, tensile, and flexural strengths. In this paper, the influence of three types (linear displacement, uniform traction, and periodic) of boundary conditions used in numerical homogenization on the calculated values of HPC properties is determined and compared with experimental data. We take into account the softening behavior of HPC due to the development of damage (micro-cracks), which finally leads to failure. The results of numerical simulations of the HPC samples were obtained by using the Abaqus package that we supplemented with our in-house finite element method (FEM) computer programs written in Python and the homogenization toolbox Homtools. This has allowed us to better account for the nonlinear response of concrete. In studying the microstructure of HPC, we considered a two-dimensional representative volume element using the finite element method. Because of the random character of the arrangement of concrete’s components, we utilized a stochastic method to generate the representative volume element (RVE) structure. Different constitutive models were used for the components of HPC: quartz sand—linear elastic, steel fibers—ideal elastic-plastic, and cement matrix—concrete damage plasticity. The numerical results obtained are compared with our own experimental data and those from the literature, and a good agreement can be observed.

An experimental and analytical approach to the relaxation problem of wood-based materials—OSB (Oriented Strand Boards—pressed wood-based composite panels) beams, including beams with CFRP (Carbon fiber reinforced polymer) tape composite reinforcement, is presented. It is a relevant engineering and scientific problem due to the fact that wood and wood-based materials, as well as composite reinforcements, are widely used in building constructions. Their rheological properties are very important and complicated to estimate. A 10 day long relaxation test of thick OSB beams without reinforcement and with CFRP tape was performed. A four-point bending test with five different bending levels was performed, during which the reduction of the loading force was measured. A five-parameter rheological model was used to describe the rheology of the beams. The equations of this model were calculated with the use of Laplace transform, whereas the values of the parameters were calculated based on the experimental relaxation curves. A high correlation between experimental and theoretical results was obtained. A beam reinforced with CFRP tape was treated as a system with a viscoelastic element (OSB) and an elastic element (CFRP), joined together without the possibility of slipping. The equations of the mathematical model were calculated based on the assumptions of the linear theory of viscoelasticity and the convolution integral. A good correlation between experimental and theoretical results was obtained. A significant redistribution of stresses was observed during the relaxation of the reinforced beam. The reinforced beams show a higher stiffness of approximately 63% and carry proportionally higher loads than unreinforced beams at the same deflection values.

This paper presents the results of a study of polyurethane rigid (PUR) elastomers in terms of the constitutive law identification, and analyses the effect of polyurethane elastomers’ hardness on fatigue properties. The research objects were PUR materials based on 4,4′-diphenylmethane diisocyanate (MDI) with the hardness of 80 ShA and 90 ShA, typically used in various industrial applications. Based on the performed experimental campaign under static and cyclic loading, the constitutive model proposed by Ogden is most appropriate. In addition, a hybrid numerical–experimental analysis (using FEM-DIC) of diabolo specimens’ behaviour is carried out in fatigue tests. Based on the performed fatigue test, it is worth noting that the energy approach describes the fatigue process synonymously compared to the displacement or strain approach. Finally, simple fatigue characteristics were analyzed and statistically validated for both PUR material configurations.

Polyurethane (PU) has been used in a variety of industries during the past few years due to its exceptional qualities, including strong mechanical strength, good abrasion resistance, toughness, low-temperature flexibility, etc. More specifically, PU is easily “tailored” to satisfy particular requirements. There is a lot of potential for its use in broader applications due to this structure–property link. Ordinary polyurethane items cannot satisfy people’s increased demands for comfort, quality, and novelty as living standards rise. The development of functional polyurethane has recently received tremendous commercial and academic attention as a result. In this study, the rheological behavior of a polyurethane elastomer of the PUR (rigid polyurethane) type was examined. The study’s specific goal was to examine stress relaxation for various bands of specified strains. We also suggested the use of a modified Kelvin–Voigt model to describe the stress relaxation process from the perspective of the author. For the purpose of verification, materials with two different Shore hardness ratings—80 and 90 ShA, respectively—were chosen. The outcomes made it possible to positively validate the suggested description in a variety of deformations ranging from 50% to 100%.

This paper presents the experimental tests of concrete made on the recycled aggregates basis. Tests were carried out to determine the concrete suitability for construction purposes. The physical and strength properties were determined for three types of recycling aggregates. The aggregates were obtained from sanitary ceramics ‘SC’ (washbasins and toilet bowls), building ceramics ‘BC’ (solid bricks), and concrete rubble ‘CR’. The results obtained in tests of compressive strength, bending tensile strength, water absorption, total shrinkage, watertightness, and frost resistance of concrete made of SC and CR aggregates gave grounds for stating its suitability for structural purposes. Concrete based on the BC aggregates is not recommended for structural applications.