V10 dissociates at most pH values into smaller tetrahedral vanadate oligomers such as V4 and V2, whereas Nb10 dissociates into Nb6 under mildly or highly alkaline conditions.
Covalently supported ionic liquids in mesoporous materials were prepared by grafting 1-methyl-3-(3-trimethoxysylilpropyl)imidazolium chloride in MCM-41. Subsequently, the [Cl−] anion was changed to [BF4−], [PF6−] or [Tf2N−]. These materials that present an advantageous combination of the properties of mesoporous solid materials and ionic liquids were evaluated for CO2 sorption as well as catalysts for CO2 conversion into cyclic carbonate using propylene oxide. The material with the [Cl−] anion had the best performance for both CO2 sorption and conversion. A CO2 sorption of 11 w/w% on the adsorbent was achieved and the cycloaddition reaction exhibited a conversion of 67% with 82% selectivity with the catalyst remaining active after 5 cycles, proving that the same sorbent/catalyst setup can be used for both CO2 capture and conversion. Based on the experimental data and electronic-structure numerical simulations, we have hypothesized two major reasons why chloride out performs other anions when adsorbed on MCM-41 unlike unsupported ionic liquids.
The mixtures of aqueous amines and ionic liquids (ILs) are considered as potential solvents for CO2 capture. We report corrosion and CO2 absorption behavior of the mixed IL–amine solutions. The absorption tests were performed at 318.15 K under 0.1–2.7 MPa. The corrosion tests were carried out at 318.15 K under 2.7 MPa. Addition of [bmim][BF4] in aqueous alkanolamine solutions reduces corrosion rate for MEA by up to 72%. The CO2 absorption capacity in the mixtures falls between those of aqueous MDEA and pure IL. These results allow to choose the working pressure range as a function of other parameters, such as gas pressure and mixture viscosity. According to the simulations, [bmim][BF4] participates in the gas capture through H-bonding, although the number of amine molecules is enough to capture all supplied CO2 molecules. The equilibrium of the chemisorption reaction is, therefore, modified upon the stepwise IL addition. An ideal IL content for preventing corrosion is 10% w/w.