The VX gasket is an important part of the wellhead connector for a subsea Christmas tree. Optimization of the gasket’s structure can improve the connector’s sealing performance. In this paper, we develop an optimization approach for the VX gasket structure, taking into consideration working load randomness, based on the Kriging surrogate model-NSGA-II algorithm. To guarantee the simulation accuracy, a random finite element (R-FE) model of the connector’s sealing structure was constructed to calculate the gasket’s sealing performance under random working load conditions. The working load’s randomness was simulated using the Gaussian distribution function. To improve the calculation efficiency of the sealing performance for individuals within the initial populations, Kriging surrogate models were constructed. These models accelerated the optimization speed, where the training sample was obtained using an experimental method design and the constructed R-FE model. The effectiveness of the presented approach was verified in the context of a subsea Christmas tree wellhead connector, which matched the 20'' casing head. The results indicated that the proposed method is effective for VX gasket structure optimization in subsea connectors, and that efficiency was significantly enhanced compared to the traditional FE method.

Based on rotor dynamics theory, a two-disk flexible rotor system representing an aero-engine with freely supported structure was established with commercial software ANSYS. The physical model of the two-disk rotor system was then integrated to the multidisciplinary design optimization software ISIGHT and the maximum vibration amplitudes experienced by the two disks when crossing the first critical speed were optimized using a multi-island genetic algorithm (MIGA). The optimization objective was to minimize the vibration amplitudes of the two disks when crossing the first critical speed. The position of disk 1 was selected as the optimization variable. The optimum position of disk 1 was obtained at the specified constraint that the variation of the first critical speed could not exceed the range of ±10 %. In order to validate the performance of the optimization design, the proof-of-transient experiments were conducted based on a high-speed flexible two-disk rotor system. Experimental results indicated that the maximum vibration amplitude of disk 1 when crossing the first critical speed declined by 60.9 % and the maximum vibration amplitude of disk 2 fell by 63.48 % after optimization. The optimization method found the optimum rotor positions of the flexible rotor system which resulted in minimum vibration amplitudes.

With the increasing requirements of aeroengine performance and working stability, the primary research task of the rotor system dynamics is to build a rotor system model that can reflect the actual situation and obtain the calculation results which can reflect the real dynamic characteristics of the rotor system. In this paper, the finite element analysis model of a power turbine rotor was established, and the dynamic model and dynamic characteristics of the complex rotor system were studied. The results indicated that the finite element model could reflect the real dynamic characteristics of the power turbine rotor. For the given design rotational speed, the critical speed had enough margin and the rotor system worked safely and smoothly. This research provided a reference and theoretical basis for the calculation of the dynamic characteristics of the similar rotor system.

According to the characteristics of the rotor system in an aero-engine and the vibrational test requirements of the aero-engine ground test, suitable vibration measurement sensors and test positions were selected. The vibration signals at the casings for the compressor and turbine of a twin-spool turbo-jet engine were collected under the states of maximum power and afterburning respectively, and the power spectrum analysis was carried out to determine the positions and causes of vibration. Furthermore, methods and preventive measures for eliminating vibration have been proposed. The results indicated that the main rotor vibration excited by mass imbalance in the twin-spool turbo-jet engine was significant. Rotor spindle misalignment or rotor radial stiffness unevenness also induced the vibration. The aerodynamic pulse vibration formed by the rotor blades of the first stage of the low pressure compressor was large, and rub induced vibration fault may occur at the turbine rotor seals. Based on the power spectrum analysis technology, the rotor system faults information including the type, position, and the degree can be quickly identified, and useful attempts and explorations have been made to reduce the vibration faults of the twin-spool turbo-jet engine.