Wurtzite GaN nanocolumns are reproducibly grown by plasma-assisted molecular beam epitaxy on Si(111) and c-sapphire substrates. The nanocolumns density and diameter (600–1500 Å) are effectively controlled by means of the III/V ratio. The nanocolumns are fully relaxed from lattice and thermal strain, having a very good crystal quality characterized by strong and narrow (2 meV) low-temperature photoluminescence excitonic lines at 3.472–3.478 eV. In addition, the spectra reveal a doublet at 3.452–3.458 eV and a broad line centered at 3.41 eV. This broad emission shows a sample-dependent spectral energy dispersion, from 3.40 to 3.42 eV, explained as due to the effect of strain and/or electric fields associated with extended structural defects located at the nanocolumns bottom interface. From cathodoluminescence data, it is concluded that the doublet emission lines originate at the nanocolumns volume, most probably related to ${\mathrm{Ga}}_{\mathrm{I}}$ defects, given the column growth mode (Ga balling).

We propose a scheme for coupling laser light into graphene plasmons with the help of electrically generated surface acoustic waves. The surface acoustic wave forms a diffraction grating which allows us to excite the long lived phononlike branch of the hybridized graphene plasmon-phonon dispersion with infrared laser light. Our approach avoids patterning the graphene sheet, does not rely on complicated optical near-field techniques, and allows us to electrically switch the coupling between far-field radiation and propagating graphene plasmons.

This letter describes the procedure to manufacture high-performance surface acoustic wave (SAW) resonators on AlN/diamond heterostructures working at frequencies beyond 10 GHz. In the design of SAW devices on AlN/diamond systems, the thickness of the piezoelectric layer is a key parameter. The influence of the film thickness on the SAW device response has been studied. Optimized thin films combined with advanced e-beam lithographic techniques have allowed the fabrication of one-port SAW resonators with finger width and pitch of 200 nm operating in the 10-14 GHz range with up to 36 dB out-of-band rejection.

In this paper, an AlN/free-standing nanocrystalline diamond (NCD) system is proposed in order to process high frequency surface acoustic wave (SAW) resonators for sensing applications. The main problem of synthetic diamond is its high surface roughness that worsens the sputtered AlN quality and hence the device response. In order to study the feasibility of this structure, AlN films from 150 nm up to 1200 nm thick have been deposited on free-standing NCD. We have then analysed the influence of the AlN layer thickness on its crystal quality and device response. Optimized thin films of 300 nm have been used to fabricate of one-port SAW resonators operating in the 10-14 GHz frequency range. A SAW based sensor pressure with a sensibility of 0.33 MHz/bar has been fabricated