The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
This article aims to properly assess the hygrothermal properties of walls located in historic buildings, this study discloses the development of a remote sensing technology compatible with an in-situ measurement implemented in Palazzo Tassoni (Italy). As required by the international recommendations adapted to cultural heritage (CH), this monitoring system balances CH conservation, performance aspects and economic costs using an integrated multidisciplinary approach. Electronics for measurement of environmental parameters is composed of sensor measurements, data acquisition system and data storage and communication system. Data acquisition system, equipped with standard modbus-rtu interface, is designed to run standalone and it is based on two cloned single board PCs to reduce the possibility of data loss. In order to reduce the costs, RaspberryPI single board PCs were chosen. These run a C/C++ software based on standard modbus library and designed to implement multi-client server TCP/IP to allow communication with other devices. Storage and communication systems are based on an industrial PC; it communicates with sensor measurements’ system through a modbus-TCPIP bridge. PC runs a Labview software to provide data storage on a local database and graphical user interface to properly see all acquired data. Herein, some sensing options and approaches of measurement are described, unveiling different possible ways of enhancing the retrofit of CH with adapted technology.
The main purpose of the HeLLo project is to contribute to data available on the literature on the real hygrothermal behavior of historic walls and the suitability of insulation technologies. Furthermore, it also aims at minimizing the energy simulation errors at the design phase and at improving their conservation features. In this framework, one of the preliminary activities of the study is the creation of a real in situ hot box to measure and analyze different insulation technologies applied to a real historic wall, to quantify the hygrothermal performance of a masonry building. Inside this box, ‘traditional’ experiments can be carried out: recording heat flux, surface temperature, and air temperatures, as well as relative humidity values through the use of a new sensing system (composed of thermocouples and temperature/relative humidity combined sensors). Within this paper, the process of development, construction, and validation of this new metering box is exhibited. The new hot box, specifically studied for historic case studies, when compared to other boxes, presents other advantages compared to previous examples, widely exemplified.
29 August 2024 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Recent beam test results are presented for the prototype detector of the ePIC-dRICH forward particle-identification system at the EIC. A large-area prototype SiPM readout plane consisting of a total of up to 2048 3×3 mm2 sensors has been constructed. The photodetector prototype is modular and based on a novel EIC-driven photodetection unit developed by INFN, which integrates 256 SiPM pixel sensors, cooling and TDC electronics in a volume of ∼5 × 5 × 14 cm3. Several modules have been built and successfully tested with particle beams at CERN-PS in October 2023 and in May 2024. The data have been collected with a complete chain of front-end and readout electronics based on the ALCOR chip, developed by INFN Torino.