The high energy efficiency and lightweight are recent trends in mobile hydraulics. In this paper, a new energy-saving fluid power converter (FPC) is designed to solve the problem of low energy conversion efficiency in hydraulic systems with variable load. The FPC is a kind of hydraulic transformer, it is similar to the DC transformer in working principle. Pulse width modulation (PWM) signal is used to control the high-speed on-off valves, and the high-speed on-off valve can switch supply ports between different pressure oil sources to achieve the adjustment of the FPC’s output. The FPC’s mathematical principle is analyzed in this paper, the influence of the friction between the inertial mass and the conversion cylinder on the system efficiency is studied. The influence of the PWM signal frequency, conversion cylinder cross-sectional area and inertial mass on the characteristics of FPC system is deduced. The results of the analysis are validated by Matlab/Simulink, and suggestions of selecting the design parameters of FPC are provided.
2 April 2022 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
A wheel-step driving system that can realise a wheel-step driving mode is proposed to improve the tractive performances of wheeled unmanned vehicles when driving on soft roads. Although the wheel-step driving system proposed in this paper adopts double wishbone suspension, it also can be applied for different suspension configurations after adjustment. In this paper, a typical sandy soil and a designated tyre are selected as hypotheses to verify the enhanced effect of wheel-step driving system on tractive performance. First, the wheel-soil interaction mechanism of the wheel-step driving mode is analysed based on terramechanics theory and the wheel-step driving strategy is optimised. The tractive performances of the wheel-step driving mode and the normal driving mode are compared and analysed through numerical calculations. Then, a soil model is established using discrete element software and a wheel model is established using dynamics software; the coupled simulation of the dynamic and discrete elements compares the drawbar pull, the driving torque and the sinkage in the normal driving mode, the wheel-step driving mode and the optimised wheel-step driving mode. The simulation data verify the effectiveness of the optimisation strategy used and the enhancement effect of the wheel-step driving mode on the traction performance. Finally, a soil-bin test system is built and a tractive performance experiment is performed. The experimental data and the simulation data show good agreement, thus verifying the correctness of the simulation model.
13 December 2018 in IOP Conference Series: Materials Science and Engineering
Taking the crawler amphibious vehicle as the research object, the dynamic system is designed with an extended-range structure. Based on the design parameters and performance indicators, the vehicle dynamics is used to calculate the power demand and torque demand of the dynamic system that meets the design conditions, and then the power component selection and matching calculation. Based on the CRUISE vehicle simulation software, the vehicle model of the extended-range structure is established. Design a constant temperature control strategy and the cycle run simulation and performance indicators verification are set. The designed extended-range dynamic system meets the design indicators, and the vehicle has powerful performance and meets the driving mileage requirements. Lay the foundation for subsequent laboratory bench testing.
10 April 2024 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The variable-configuration wheel-track unmanned ground vehicle (VCWT-UGV) has both fast-moving speed on structured roads and strong passing ability on even roads. Steering dynamics analysis is the theoretical basis to ensure that the UGV can still maintain high maneuverability in complex environments. Based on the elastic-plastic deformation characteristics of the soil on the soft road, considering the dynamic changes in resistance and resistance torque caused by soil accumulation on the wheel side during the center-steering process of UGV. Firstly, MBD-EDM co-simulation is conducted to qualitatively analyze the characteristics of soil accumulation on the wheel side during the steering process. Then, based on the terramechanics characteristics of the locomotion mechanism, the kinematic characteristics of the UGV during center-steering are analyzed, and the mathematical model of soil accumulation on the wheel side is established. Furthermore, the dynamic model of the vehicle center-steering with lateral resistance changes is established, and the accuracy of the model is validated through tests. Based on a validated theoretical model, the changes in resistance, resistance torque, and power during the steering process are analyzed. Based on the analysis results, by adjusting the wheel deflection angle, the driving configuration and the motion modes of VCWT-UGV, the steering power efficiency of VCWT-UGV can reach 71.67%. The research results provide a valuable reference for the lateral dynamic modeling of general UGVs on unstructured roads.