Sebastian Johannes Strauss

Mr. Sebastian Johannes Strauss

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2019 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SSSebastian Johannes Strauss
Sebastian Johannes Strauss
ASAndreas Senz
Andreas Senz
JEJessica Ellinger
Jessica Ellinger
In this study, the influence of the open bath and closed-injection pultrusion (CIP) processing methods of epoxy resins on the quality of glass fiber composites was investigated. In addition to the state-of-the-art epoxy resin system with long pot life, new resin systems with short pot life have recently been developed. These systems require processing by closed-injection pultrusion. The epoxies with long pot life allow both processing variants. The experimental work was carried out with two types of injection and impregnation chambers (ii_chamber), namely with a conical and a teardrop design. Fully impregnated composites, which were used for further analyses, could be produced by using the conical ii_chamber. The composite properties of the open bath and the conical ii_chamber impregnation methods were compared. No significant influence on the bending stress could be determined; the interlaminar shear strength was up to 10% better with open bath impregnation than with ii_chamber. For the composites investigated, it was shown that the open bath and ii_chamber impregnation methods can be used to produce parts with partially comparable properties, as demonstrated for the epoxy formulation with long pot life. These results indicate that processing of epoxy systems with a short pot life is also possible by closed-injection pultrusion. Furthermore, the influence on the composite properties of the time interval between the mixing of an epoxy resin and processing in an open bath was investigated. No significant effect on the bending stress and interlaminar shear strength could be determined.

20 March 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SSSebastian Johannes Strauss
Sebastian Johannes Strauss
FWFrederik Wilhelm
Frederik Wilhelm
ASAndreas Senz
Andreas Senz
HEHerbert Engelen
Herbert Engelen
SBSimon Boysen
Simon Boysen
CBChristian Bonten
Christian Bonten
The use of innovative higher-performance highly reactive resin systems requires an enhancement of the established method of fiber impregnation (open bath) towards closed resin-injection pultrusion (CIP), due to the short pot life of the resin systems. The result is that the open bath is developed into a closed injection and impregnation chamber (“ii-chamber”). In this study, three parameters—resin viscosity, opening angle and opening factor at the injection point on the ii-chamber—are varied, each in three stages. For each set of parameters, a pultrusion trial is conducted and the process pressures in the ii-chamber and pultrusion die measured. This enables direct feedback via the process conditions of the as yet uncured composite. The data obtained are used to validate a newly developed simulation model. The model is based on Darcy’s law, which has been extended to take fiber movement into account and thus represent the resulting pressure increase in the die. The flexible ii-chamber and die concept enhance our understanding of the processes taking place in the die system. The sensitivity of the process pressures can be shown for the three influencing variables. The experiment shows that of the three influencing variables investigated, viscosity has the greatest sensitivity to pressure development. In general, it can be said that over the length of the pultrusion die system, the pressure level increases across the three measuring points.

2 April 2021
Verified
Journal Article
Closed access
SSSebastian Johannes Strauss
Sebastian Johannes Strauss
SBSimon Boysen
Simon Boysen
ASAndreas Senz
Andreas Senz
FWFrederik Wilhelm
Frederik Wilhelm
NRNiko Rilli
Niko Rilli
ESAFORM is an association with the mission to stimulate applied and fundamental research in the field of material forming. Its annual conference, the International ESAFORM Conference on Material Forming, is used to achieve one of the main goals of ESAFORM: to spread scientific and technological information related to material forming within academic and industry. The next conference will be held online on 14-16 April 2021.

Verified
Journal Article
Open access
PDF file
FWFrederik Wilhelm
Frederik Wilhelm
SSSebastian Johannes Strauss
Sebastian Johannes Strauss
RWRaffael Weigant
Raffael Weigant
KDKlaus Drechsler
Klaus Drechsler
The present study investigates the effect of power ultrasonic on the expansion of fiber strands. A potential application of such expansion is in the production process known as closed injection pultrusion. The fiber strand in the pultrusion injection chamber is in compacted form, and so, any expansion of the fiber strand resulting from power ultrasonic should lead to improved fiber wetting. To investigate this, a wetted fiber strand was clamped on two sides and sonicated in the middle from below. The potential expansion of the fiber strand was visually determined through an observation window. The study concluded that power ultrasonic has a minimal to virtually negligible effect on the expansion of both glass and carbon fiber. The degree of expansion remains within a range of 3% maximum, with a standard deviation in the respective midpoint tests of up to 60% for glass fiber and over 100% for carbon fiber. This shows that the fibers are limited in their freedom of movement, and so no expansion can be achieved using power ultrasonic. A further increase in amplitude does not lead to any further expansion but to the destruction of the fibers.

14 September 2024
Verified
Book Chapter
Closed access
PDF file
MOManuel Otto
Manuel Otto
HFHorst E. Friedrich
Horst E. Friedrich
DDDan Dragulin
Dan Dragulin
DKDavid Klaumünzer
David Klaumünzer
ASAshley Stone
Ashley Stone
Patrick KeilPatrick Keil
Patrick Keil