In recent years, there is a growing interest in Human Activity Recognition (HAR) systems applied in healthcare. A HAR system is essentially made of a wearable device equipped with a set of sensors (like accelerometers, gyroscopes, magnetometers, heart-rate sensors, etc...) and a classifier able to recognize the activity performed. In this study we focused on the choice of the classifier, since there isn't a unique and consolidated methodology for HAR. The main aim of the study is to compare the performances of 5 classifiers, based on machine learning. Furthermore, we analyzed advantages and disadvantages of their implementation onto a wearable and realtime HAR system. We acquired magnetic and inertial measurement unit (MIMU) signals from 15 young volunteers. For each subject, we recorded 9 signals from tri-axis accelerometer, gyroscope and magnetometer. All signals were divided in 5s-windows and processed to extract 342 features in time, frequency and time-frequency domains. By means of two feature selection steps (correlation-based and genetic algorithm), we reduced the number of features to 69. These features were used as input for the following 5 classifiers: K-Nearest Neighbor (KNN), Feedforward Neural Network (FNN), Support Vector Machines (SVM), Naïve Bayes (NB), and Decision Tree (DT). Our results showed that all classifiers were able to correctly recognize more than 90% of activities. The best performances were obtained by KNN. Analyzing advantages and disadvantages of each classifier for its implementation by means of a microcontroller the most suitable was DT. In fact, this classifier can be easily implemented, it has low memory and computational requirements, and it allows for a further reduction of the required features.
Inertial measurement units (IMUs) are increasingly used in gait analysis because of their portability, low cost and long-distance measuring. The aim of this study focused on the comparison of 2 different inertial sensors setups and algorithms respect to a reference measure system for the estimation of gait spatio-temporal parameters. (a) A marker stereo photogrammetric system (Optitrack) was used as reference goldstandard. Two IMU setups were adopted for the comparison of different algorithms: (b) a single sensor positioned on the trunk, and (c) 2 sensors positioned on the heels. Three healthy subjects performed gait trials at 3 different self-selected speeds: (α) normal, (β) slower than normal, (γ) higher than normal. Data analysis considered signals that had been registered simultaneously by the three setup instrumentations. Among the IMUs signals, acceleration and angular velocity were considered and used for gait parameters estimation. Signal post-processing was performed through algorithms analyzing signals with respect to the local sensor axes, avoiding cumbersome pre-processing. The absolute errors among the spatio-temporal gait parameters obtained by the 3 setups were evaluated. Overall, IMUs allowed an accurate parameters estimation, at all the performed velocities. A consistent correspondence was confirmed by the comparison of estimated spatio-temporal parameters. However, for most of them, the trunk configuration revealed smaller errors with respect to the heels configuration. This may be explained by a better identification of gait events guaranteed by the trunk IMU algorithm. The results demonstrated the suitability and accuracy of the trunk IMU setup and algorithm for the estimation of spatio-temporal parameters during gait. Besides, the trunk IMU setup requires the use of only one sensor instead of two.
In clinical practice and research, innovative digital technologies have been proposed for the characterization of neuromuscular and movement disorders through objective measures. Among these, wearable devices prove to be a suitable solution for tele-monitoring, tele-rehabilitation, and daily activities monitoring. Inertial Measurement Units (IMUs) are low-cost, compact, and easy-to-use wearable devices that evaluate kinematics during different movements. Kinematic variables could support the clinical evaluation of the progression of some neuromuscular diseases and could be used as outcome measures. The current review describes the use of IMUs for the biomechanical assessment of meaningful outcome measures in individuals affected by Duchenne muscular dystrophy (DMD). The PRISMA methodology was used and the search was conducted in different databases (Scopus, Web of Science, PubMed). A total of 23 articles were examined and classified according to year of publication, ambulatory/non-ambulatory subjects, and IMU positioning on human body. The analysis points out the recent regulatory identification of Stride Velocity 95th Centile as a new endpoint in therapeutic DMD trials when measured continuously from a wearable device, while only a few studies proposed the use of IMUs in non-ambulatory patients. Clinical recognition of reliable and accurate outcome measures for the upper body is still a challenge.