Yongjun Zhou

Dr. Yongjun Zhou


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Peng ZhuPeng Zhu
Peng Zhu
WCWenshuo Cao
Wenshuo Cao
LZLianzhen Zhang
Lianzhen Zhang
YZYongjun Zhou
Yongjun Zhou
Yu-Ching WuYu-Ching Wu
Yu-Ching Wu
ZMZhongguo John Ma
Zhongguo John Ma
The creep behavior of Ultra-High-Performance Concrete (UHPC) was investigated by machine learning (ML) and SHapley Additive exPlanations (SHAP). Important features were selected by feature importance analysis, including water-to-binder ratio, aggregate-to-cement ratio, compressive strength at loading age, elastic modulus at loading age, loading duration, steel fiber volume content, and curing temperature. Four typical ML models—Random Forest (RF), Artificial Neural Network (ANN), Extreme Gradient Boosting Machine (XGBoost), and Light Gradient Boosting Machine (LGBM)—were studied to predict the creep behavior of UHPC. Via Bayesian optimization and 5-fold cross-validation, the ML models were tuned to achieve high accuracy (R2 = 0.9847, 0.9627, 0.9898, and 0.9933 for RF, ANN, XGBoost, and LGBM, respectively). The contribution of different features to the creep behavior was ranked. Additionally, SHAP was utilized to interpret the predictions by the ML models, and four parameters stood out as the most influential for the creep coefficient: loading duration, curing temperature, compressive strength at loading age, and water-to-binder ratio. The SHAP results were consistent with theoretical understanding. Finally, the UHPC creep curves for three different cases were plotted based on the ML model developed, and the prediction by the ML model was more accurate than that by fib Model Code 2010.

20 April 2020 in International Journal of Concrete Structures and Materials
Verified
Journal Article
Open access
PDF file
YZYu Zhao
Yu Zhao
XCXiaozhe Cao
Xiaozhe Cao
YZYongjun Zhou
Yongjun Zhou
GWGangqiang Wang
Gangqiang Wang
RTRuixin Tian
Ruixin Tian
Distribution factors (DFs) for one typical cross-section as specified in the AASHTO LRFD specification can be varied when the bridge parameters such as span length, loading lanes and skew are changed. The diversity between design and actual DFs may be varied as the bridge parameters changed. To study this diversity, this paper presents an evaluation of lateral load DFs for prefabricated hollow slab bridges. The response of the bridge was recorded during the field test. This field test was divided into two stages: a concentrated force loading test on the prefabricated girder that settled on the bridge supports before the girders were connected transversely and a vehicle loading test after the girders were connected transversely. The instruments used to record the response of the bridge were strain gauges and dial indicators. The measured data in the multi-stages of the field test could be used to calibrate the support condition of the bridge and transverse connection between adjacent girders in the finite element model (FEM) using beam and plate elements. From the FEM, DFs for this hollow slab bridge were determined and compared with the DFs in the AASHTO LRFD specification. A parametric study using the calibrated FEM was then used to investigate the effect of various parameters including span length, skew and bridge deck thickness on the DFs. It was found that AASHTO LRFD specification is conservative compared with the analysis in the FEM, while this conservatism decreased as the span length and skew of the hollow slab bridge increased.

5 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
BYBing-chen Yang
Bing-chen Yang
FXFang-Zhou Xu
Fang-Zhou Xu
YZYu Zhao
Yu Zhao
TYTian-yun Yao
Tian-yun Yao
HHHai-Yang Hu
Hai-Yang Hu
MLMing-Zhu Li
Ming-Zhu Li
In order to investigate the analysis and processing methods for nonstationary signals generated in bridge health monitoring systems, this study combines the advantages of complete ensemble empirical mode decomposition (CEEMD) and wavelet threshold denoising algorithms to construct the CEEMD–wavelet threshold denoising algorithm. The algorithm follows the following steps: first, add noise to the monitoring data and obtain all the mode components through empirical mode decomposition (EMD), denoise the mode components with noise using the wavelet threshold function to remove the noise components, select the optimal stratification for denoising the monitoring data of the Guozigou Bridge in Xinjiang in January 2023, determine the wavelet type and threshold selection criteria, and reconstruct the denoised intrinsic mode function (IMF) components to achieve accurate extraction of the effective signal. By referencing the deflection, temperature, and strain data of the Guozigou Bridge in Xinjiang in January 2023 and comparing the data cleaned by different mode decomposition and wavelet threshold denoising methods, the results show that compared with empirical mode decomposition (EMD)–wavelet threshold denoising and variational mode decomposition (VMD)–wavelet threshold denoising, the signal-to-noise ratios and root-mean-square errors of the four types of monitoring data obtained by the algorithm proposed in this study are the most ideal. Under the premise of minimizing reconstruction errors when processing a large amount of data, it has better convergence, verifying the practicality and reliability of the algorithm in the field of bridge health monitoring data cleaning and providing a certain reference value for further research in the field of signal processing. The computational method constructed in this study will provide theoretical support for data cleaning and analysis of nonstationary and nonlinear random signals, which is conducive to further promoting the improvement of bridge health monitoring systems.

11 February 2023 in Buildings
Verified
Journal Article
Open access
PDF file
YJYuan Jing
Yuan Jing
XZXu Zhang
Xu Zhang
YZYongjun Zhou
Yongjun Zhou
YZYu Zhao
Yu Zhao
WLWenchao Li
Wenchao Li
The dynamic response of a prestressed concrete box girder bridge under the impact of an over-height vehicle is studied using the numerical simulation method. The finite element analysis software LS-DYNA is used to simulate the collision between the bridge superstructure and an over-height truck. Further, a parametric analysis is carried out to investigate the influence of six factors, i.e., girder configuration, vehicle speed, vehicle mass, impact angle, concrete strength and strand prestress, on both local damage and overall performance of the bridge. The numerical analysis results show that the girder configuration, vehicle speed, vehicle mass and impact angle have obvious effects on both local damage and the overall behavior of the PC box girder bridge. Whereas, the concrete strength and strand prestress only have a certain effect on the local damage at the impact area with very limited influence on the overall behavior of the bridge. In addition, based on the results obtained from the numerical simulation and parametric analysis, a formula for predicting the peak and average impact force of the prestressed concrete box girder bridge under the over-height vehicle impact is developed. The proposed impact force formula comprehensively accounts for the influence of the vehicle speed, vehicle mass and impact angle and can accurately predict the impact force generated under different working conditions, which confirms the promising prospect of the proposed formula in practical applications.

30 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
WYWang Yelu
Wang Yelu
YZYongjun Zhou
Yongjun Zhou
YWYelu Wang
Yelu Wang
CYChangwei Yao
Changwei Yao
KWKailong Wang
Kailong Wang
XLXuchang Luo
Xuchang Luo
Several overloaded-induced overturning incidents of girder bridges with single-column piers have occurred in recent years, resulting in significant casualties and economic losses. Temperature, in addition to overloading, may also play a role in exacerbating bridge overturning. To investigate the association between temperature and bridge overturning, an explicit finite element model (EFEM) of a three-span concrete curved continuous bridge considering nonlinearities was developed to simulate overall collapse. The effects of uniform and gradient temperatures on the overall overturning stability of curved and straight bridges were evaluated based on the EFEMs. Furthermore, the temperature–bridge coupling model and temperature–vehicle–bridge coupling model were utilized to examine how gradient temperature influences bridge overturning. The results show that the overall overturning collapse of a bridge follows four stages: stabilization, transition, risk and overturning. Variations in uniform temperature from −30 °C to 60 °C had a negligible effect on the ultimate vehicle weight for bridge overturning, with a variation of less than 1%. As the gradient temperature ranged from −30 °C to 60 °C, curved bridges show less than a 2% variation in ultimate vehicle weights, compared to a range of −6.1% to 11.7% for straight bridges. The torsion caused by positive gradient temperature in curved bridges can exacerbate bridge overturning, while negative gradient temperature in straight bridges can lead the girder to ‘upward warping’, facilitating girder separation from bearings. Monitoring the girder rotation angle and vertical reaction force of bearings can serve as important indicators for comparing the stability of bridges.

24 May 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
BYBing-chen Yang
Bing-chen Yang
YZYu Zhao
Yu Zhao
TYTian-yun Yao
Tian-yun Yao
YZYongjun Zhou
Yongjun Zhou
MJMeng-Yi Jia
Meng-Yi Jia
CXChang-Chun Xiao
Chang-Chun Xiao
Vehicle force identification is one of the core technical problems to be solved urgently in the management of transportation infrastructure, and it has also been a research hotspot in recent years. To promote the application of vehicle force identification technology on bridges and explore its development direction, the development status of indirect vehicle force identification methods based on bridge response is reviewed during this study. The basic theories of two major methods, including bridge weigh-in-motion (BWIM) and moving force identification (MFI), are described in detail in this study, and then, the key technical principles of bridge force identification are revealed. Secondly, the development status of BWIM in recent years is reviewed from three aspects, including test accuracy, applicability and test efficiency. Combined with a variety of theories, the current status of MFI is analyzed from the establishment of the solution to the equation. Finally, the development direction of an artificial neural network and machine vision technology are prospected in this study. The BP neural network has good self-learning ability and self-adaptive ability, but the algorithm needs to be improved. The identification method based on machine vision represents the current development direction in vehicle force identification, with great potential.