Wang Yelu

Dr. Wang Yelu

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
WYWang Yelu
Wang Yelu
YZYongjun Zhou
Yongjun Zhou
YWYelu Wang
Yelu Wang
CYChangwei Yao
Changwei Yao
KWKailong Wang
Kailong Wang
XLXuchang Luo
Xuchang Luo
Several overloaded-induced overturning incidents of girder bridges with single-column piers have occurred in recent years, resulting in significant casualties and economic losses. Temperature, in addition to overloading, may also play a role in exacerbating bridge overturning. To investigate the association between temperature and bridge overturning, an explicit finite element model (EFEM) of a three-span concrete curved continuous bridge considering nonlinearities was developed to simulate overall collapse. The effects of uniform and gradient temperatures on the overall overturning stability of curved and straight bridges were evaluated based on the EFEMs. Furthermore, the temperature–bridge coupling model and temperature–vehicle–bridge coupling model were utilized to examine how gradient temperature influences bridge overturning. The results show that the overall overturning collapse of a bridge follows four stages: stabilization, transition, risk and overturning. Variations in uniform temperature from −30 °C to 60 °C had a negligible effect on the ultimate vehicle weight for bridge overturning, with a variation of less than 1%. As the gradient temperature ranged from −30 °C to 60 °C, curved bridges show less than a 2% variation in ultimate vehicle weights, compared to a range of −6.1% to 11.7% for straight bridges. The torsion caused by positive gradient temperature in curved bridges can exacerbate bridge overturning, while negative gradient temperature in straight bridges can lead the girder to ‘upward warping’, facilitating girder separation from bearings. Monitoring the girder rotation angle and vertical reaction force of bearings can serve as important indicators for comparing the stability of bridges.

20 September 2023 in Buildings
Verified
Journal Article
Open access
PDF file
ZHZhiqiang Han
Zhiqiang Han
GXGang Xie
Gang Xie
YZYongjun Zhou
Yongjun Zhou
YZYajuan Zhuo
Yajuan Zhuo
WYWang Yelu
Wang Yelu
LSLin Shen
Lin Shen
To overcome the limitations of using time interval division to calculate the bridge impact coefficient (IM), a sieving method has been proposed. This method employs multiple sieves on bridge time–history curve samples to ultimately obtain the bridge impact coefficients. Firstly, CA cellular automata are used to establish different levels of traffic flow fleet models. The random traffic flow–bridge coupling dynamic model is established through wheel–bridge displacement coordination and mechanical coupling relationships based on the theory of modal synthesis. Then, the variation of bridge dynamic time–history curves for different classes of random traffic flow, speed and pavement unevenness parameters are analyzed. The sieving method is applied to screen the extreme points of the dynamic time–history curve of the bridge, enabling the distribution law of the bridge IM to be obtained using the Kolmogorov–Smirnov test (K–S test) and statistical analysis. Finally, the calculated value is then compared with the IM specifications of multiple countries. The results show that the proposed method has high identification accuracy and produces a good inspection effect. The value obtained using the sieving method is slightly larger than the value specified in the US code, 0.33, which is considerably larger than the values specified in other national codes. As pavement conditions deteriorate, the IM of the bridge increases rapidly, especially under Class C and Class D pavement unevenness, which exceed the values specified in various national bridge specifications.

24 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
WYWang Yelu
Wang Yelu
YZYongjun Zhou
Yongjun Zhou
YZYang Zhao
Yang Zhao
YZYu Zhao
Yu Zhao
YWYelu Wang
Yelu Wang
WFWei Feng
Wei Feng
There are differences between the dynamic deflection and bending moment (strain) in the same section of continuous girder bridges. However, the selection of the response for calculating dynamic amplification factors (DAFs), which are essential for bridge health monitoring and safety assessment, remains controversial. Modes may play a role in the relationship between the deflection DAF and the bending moment DAF in both numerical analysis and field tests. To investigate the distinctions between the DAFs of the deflection and bending moment in a continuous girder bridge, functional expressions of the DAFs were derived, taking into account multi-factor coupling under concentrated forces. The interaction effects of the mode and road surface condition (RSC), vehicle speed, bridge span length, and span number on the deflection DAF, the bending moment DAF, and the ratio of the deflection DAF to the bending moment DAF (RDM) of precast continuous box-girder bridges were analyzed using vehicle-bridge interaction. To ensure the accuracy of the DAF in numerical computations and experimental tests, two types of accuracy indexes and the corresponding cut-off modes were provided. Validation was conducted by performing dynamic load tests on two field bridges. The results indicate that different modes have a significant effect on the RDM of the mid-span section of a bridge. When considering multiple factors, the deflection DAF and bending moment DAF of the mid-span section increased rapidly with the considered modes and then stabilized. Statistically, the RDM of all nine bridges ranged from 1.00 to 1.12, indicating that the deflection DAF was greater than the bending moment DAF. The suggested cut-off modes can be utilized for efficient and accurate calculation of the DAF and response signal fidelity.

24 August 2022 in Coatings
Verified
Journal Article
Open access
PDF file
WYWang Yelu
Wang Yelu
JTJun Tian
Jun Tian
YZYongjun Zhou
Yongjun Zhou
YZYu Zhao
Yu Zhao
WFWei Feng
Wei Feng
KMKeqiang Mao
Keqiang Mao
Accurate acquisition of dynamic load allowance (DLA) based on measurement data is essential to the safety assessment of a bridge. When static load tests cannot be achieved, and filtering fails, the estimated DLAs from the experimental method vary widely due to the choice of a left or right band. In this paper, the proposed weighted average method (WAM) is used to possibly solve the above problem in continuous gird bridges. Two-span and three-span precast concrete box-gird bridges were selected to optimize intercepted segments of WAM for the first time with the assistance of standard deviation and coefficient of variation in statistics. Then, a DLA measurement case of the negative bending moment was utilized to verify the validity of the WAM. The results show that the intercepted segments of 10/16 to 1 times the span length were suitable for the WAM to calculate the DLA of the negative bending moment due to small offset moments and stable variation coefficients. The WAM had a strong anti-interference ability of outliers filtering in “bad data,” which differed significantly from the experimental method. In three measurements of a field bridge, DLAs obtained by the WAM had less dispersion than the experimental and low-pass filtering methods.

17 March 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WYWang Yelu
Wang Yelu
YZYongjun Zhou
Yongjun Zhou
XJXin Jiang
Xin Jiang
YZYu Zhao
Yu Zhao
HZHuantao Zhang
Huantao Zhang
The deflection dynamic load allowance (DLA) of stiff bridges with high piers requires sub-millimeter accuracy. New technologies such as the vision-based optical method and GNSS are not yet recognized for use in DLA measurements due to their smaller SNR. Presently, the scaffolding method is widely utilized for dynamic deflection measurements in dynamic load tests owing to the reliability of employing rigid contact. When scaffolding is not available, engineers have to resort to a suspension hammer system. However, the mass eccentricity of the hammer, stretched-wire length, and wind will decrease the measurement accuracy. To overcome these drawbacks of the suspension hammer method (SHM), a preloaded spring method (PSM) and the related stretched-wire-spring system (SWSS) are proposed in this paper. The dynamic deflection of the coupled vehicle-bridge-SWSS was obtained by vehicle-bridge interaction (VBI) analysis. The sensitivity parameters of the PSM were analyzed and optimized to minimize the measurement error. Indoor experiments and field dynamic load tests were conducted to validate the feasibility and accuracy of the PSM. Additionally, the differences in dynamic deflection measurements between the PSM and SHM in windy environments were compared. The results show that, in a windless environment, the DLAs of the PSM are affected by the spring stiffness, stretched-wire length, and stretched-wire section stiffness, independently of the preload force. When the wind speed is less than or equal to 8 m/s and the pier height is less than 30 m, the maximum deflection measurement error of the PSM is −2.53%, while that of the SHM is −15.87%. Due to its low cost and high accuracy, the proposed method has broad application prospects in the dynamic deflection measurement of stiff bridges with high piers.

1 July 2024 in Buildings
Verified
Journal Article
Open access
PDF file
WYWang Yelu
Wang Yelu
JTJun Tian
Jun Tian
DZDong Zheng
Dong Zheng
DJDayang Jing
Dayang Jing
BCBenzhen Cai
Benzhen Cai
XLXiaofeng Liu
Xiaofeng Liu
Several single-column pier girder bridges have been involved in overturning accidents, resulting in significant economic losses and casualties, thus necessitating a risk assessment of the overturning stability. To date, the effect of structural degradation due to concrete creep on the long-term stability of bridges has not been demonstrated. In this study, a full-scale nonlinear analysis of the lateral overturning process of a collapsed concrete box girder based on the explicit dynamic finite element method (EFEM) was conducted to verify the reliability of the numerical method. An EFEM model incorporating concrete creep was developed to demonstrate the effect of structural degradation on the long-term stability of bridges. The synthesis overturning axis method (SOAM) was proposed to evaluate the long-term overturning stability of concrete continuous bridges, aiming to address the deficiencies in existing methods, particularly for curved bridges, and was compared with conventional methods. The results show that the variations in bearing reaction forces between curved and straight bridges under creep and self-weight are minimal, staying within 2%. An increase in the creep terminal coefficient results in the opposite trend in the ultimate vehicle weight of curved bridges and straight bridges, but fluctuations remain within 2%, indicating that long-term creep has a limited effect on the overall overturning stability. A failure analysis of 20 single-column pier bridges reveals significant differences in the ultimate vehicle weight between the rigid overturning axis method (ROAM) and folded overturning axis method (FOAM), with error ranges of −14.2% to 567.4% and −99.1% to −32.1%, respectively. The SOAM results have the smallest error range compared to those of the EFEM, with an error range of −38.8% to 33.9%. Despite these errors, the SOAM demonstrates a significant improvement in characterizing the trend and assessment accuracy of the overall overturning stability of single-column pier bridges.