The simple planar shape and wideband input impedance of the bow‐tie antenna make it suitable to diverse wideband applications. However, the radiation pattern of this kind of antenna is not stable and the gain in the broadside direction deteriorates with increasing frequencies. In this article, the operation of both the triangular and the rounded‐edge versions of the bow‐tie antenna is thoroughly investigated and the performance thereof is compared. A technique to maximise such performance, which consists of inserting radially aligned grooves in the radiators' ends, is presented. The bandwidth, defined by a broadside gain of at least 2 dBi and a reflection coefficient magnitude of less than −10 dB, is improved from 85.7% to 97.9% in simulations. Such an improvement is validated through the measurement of two prototypes, in which the presented technique also increases the broadside gain in up to 1.5 dB, with no significant change in the shapes of the radiation patterns and in the reflection coefficient magnitude.

In this paper, a wideband dual polarized self-complementary connected array antenna with low radar cross section (RCS) under normal and oblique incidence is presented. First, an analytical model of the multilayer structure is proposed in order to obtain a fast and reliable predimensioning tool providing an optimized design of the infinite array. The accuracy of this model is demonstrated thanks to comparative simulations with a full wave analysis software. RCS reduction compared to a perfectly conducting flat plate of at least 10 dB has been obtained over an ultrawide bandwidth of nearly 7:1 at normal incidence and 5:1 (3.8 to 19 GHz) at 60° in both polarizations. These performances are confirmed by finite element tearing and interconnecting computations of finite arrays of different sizes. Finally, the realization of a 28 × 28 cell prototype and measurement results are detailed.

When a wideband antenna is backed by an artificial magnetic conductor (AMC) reflector, the bandwidth is reduced. With the optimization of the shape of the AMC it is possible to exhibit multiband behavior, but the problem becomes complex if the bands are also intended to be wide. In this study, a methodology that exploits both the expected in-band and out-of-band behaviors of a dual-band AMC was used to design a low-profile, triple-band, and wideband directive antenna. The methodology was validated with a prototype suitable for the European standards of 4G/5G and Wi-Fi 2.4/5/6E, operating within the following bands: 2.4–2.7 GHz, 3.4–3.8 GHz, and 5.17–6.45 GHz. The measured results showed respective peak values of 8.0, 9.1, and 10.5 dBi for the broadside realized gain, front-to-back ratios larger than 19 dB, cross-polarized levels lower than -18 dB, and stable half-power beamwidths within each band. Furthermore, 3 dB gain bandwidths of 34.4%, 19.7%, and 31.0% were also measured.

An analysis of the joint antenna-channel problem in ultrawideband communications is carried out in order to provide tools for the performance evaluation of antennas while taking into account the system architecture and the radio link scenarios. Owing to the stochastic character of channels and of antenna close environment, a statistical approach to the problem based on discrete channel models is favored. The distinction between gain and dispersion effects is highlighted, both in a nondirectional and in a fully directional channel model. It is shown that antenna distortion generally has a small effect, but for coherent pulse detection it provides an extra gain in dense multipath channels with respect to ideal antennas and low density channels

This article presents the design, realization and measurement of lightweight absorbing material for space applications. The electromagnetic absorber, operating on the [2 GHz, 2.3 GHz] frequency band, is designed for oblique incidence ranging from 35° to 65°. Wide-angle designs are demonstrated to be particularly challenging at oblique incidence and an approach consisting in dividing the surface in two different sectors with respect to the incoming angle is proposed. A specific measurement setup is presented in order to characterize this new kind of evolutive absorber. The measurement results show that the sectorial absorber achieves a reflection coefficient inferior to −11.5 dB, corresponding to an absorptivity above 0.965 on the frequency band [2 GHz, 2.3 GHz] for both TE and TM polarizations for angles of incidence varying from 35° to 65°.