26 May 2023 in IEEE Transactions on Antennas and Propagation
Absorbed power density (APD) is challenging to assess due to antenna-human body interactions since the antenna is close to the human body. This paper presents a novel technique for non-invasive APD assessment by considering antenna-human body coupling. The electric field integral equation based on spatial dyadic Green’s functions (DGFs) is solved inversely by the method of moments to reconstruct the equivalent currents using the electric field sampled on the surface of the hemisphere surrounding the antenna. Then, the APD is assessed by the equivalent currents beneath the air-phantom interface. The reconstruction errors are obtained using two types of placement of the antenna array, at the edge and corner of the handheld device, at frequencies of 15, 30, and 60 GHz. It was found that at 60 GHz, the errors did not exceed 8.75% and 11.1% for the edge- and corner-type antennas, respectively, for the maximum spatially averaged power density. The measurement requirements were investigated for an actual testing scenario, including angular resolution, E-field measurement uncertainty, and required phantom size. It is shown that the proposed technique paves the way for a new methodology to assess APD, including the antenna-human body coupling, for exposure to handheld devices operating above 6 GHz.
25 April 2022 in IEEE Transactions on Instrumentation and Measurement
In this paper, the idea of measurement inside the human skin liquid-filled phantom for 5G technologies is examined. Measurement inside the skin tissue phantom is almost off the table due to the shallow penetration depth of fields at millimeter and quasi-millimeter waves. Antenna-body interactions should be considered for absorbed power density (APD) assessment when the device is close to the human body. These effects can be considered to a large extent by measuring within the liquid phantom. The reconstruction technique is used to determine APD at the human skin surface using the backward plane-wave spectrum method through sampling the E-field at the specific distance within the phantom. The reconstruction errors were obtained using a planar array antenna at 10 to 60 GHz frequencies. These errors were no larger than 9.4%, 7.35%, 7.8% at 10, 24, and 60 GHz for assessing the maximum spatially-averaged power density for a separation distance between the device and tissue phantom larger than 1 mm. At last, the measuring requirement for the electric field was also investigated. The results suggest that the coupling/multiple-reflection effects are negligible when the separation distance between antenna and body is larger than λ.
28 February 2020 in IEEE Transactions on Wireless Communications
Accessing the spatial domain of wireless environments through antenna arrays has become key to improve the use of energy and, in light of this, there is an increasing need for low cost multi-antenna architectures. As one alternative, the Electronically Steerable Parasitic Array Radiator (ESPAR) was proposed as a coupling-based inexpensive option; allowing to significantly reduce the amount of required radio frequency (RF) front-ends. As a caveat, due to its inherent non-linear behavior, the required computational complexity can be prohibitive. Additionally, the unavailability of precise mutual coupling and channel state information (CSI) becomes a further issue difficult to avoid in practical setups. In this regard, the current work has two main contributions: a) it deals with the computational complexity by proposing the linearization of ESPAR’s system model through the truncated Taylor expansion of the admittance matrix; facilitating the spatial processing algorithm of interest. Also, the authors propose b) to face the mutual coupling and CSI unavailability issue via the joint estimation of the channel-ESPAR parameters as directly observed through the single RF front-end. Relying on the optimization of the linearized system model, the pilot-based algorithm to be introduced allows ESPAR to track the configuration that synthesizes coherent combination at a significantly low complexity. Particularly, as shown through Monte-Carlo simulation, the latter allows to obtain 4 dB of array gain with a single RF front-end via a 5-element ESPAR.
13 November 2006 in IEEE Transactions on Antennas and Propagation
An analysis of the joint antenna-channel problem in ultrawideband communications is carried out in order to provide tools for the performance evaluation of antennas while taking into account the system architecture and the radio link scenarios. Owing to the stochastic character of channels and of antenna close environment, a statistical approach to the problem based on discrete channel models is favored. The distinction between gain and dispersion effects is highlighted, both in a nondirectional and in a fully directional channel model. It is shown that antenna distortion generally has a small effect, but for coherent pulse detection it provides an extra gain in dense multipath channels with respect to ideal antennas and low density channels
11 June 2017 in International Journal of Antennas and Propagation
This paper deals with a new methodology to assess the exposure induced by both uplink and downlink of a cellular network using 3D electromagnetic simulations. It aims to analyze together the exposure induced by a personal device (uplink exposure) and that induced by a base station (downlink exposure). The study involved the major parameters contributing to variability and uncertainty in exposure assessment, such as the user’s posture, the type of wireless device, and the propagation environment. Our approach is relying basically on the modeling of the power radiated by the personal device and the ambient electric field, while taking into account the effects of human body shadowing and the propagation channel fluctuations. The exposure assessment as well as the human-wave interactions has been simulated using the finite difference in time domain method (FDTD). In uplink scenarios, four FDTD simulations were performed with a child model, used in two postures (sitting and standing) and in two usage scenarios (voice and data), which aimed to examine the exposure induced by a mobile phone and a tablet emitting, respectively, at 900 MHz and 1940 MHz. In the downlink scenario, a series of FDTD simulations of an exposure to a single plane wave and multiplane waves have been conducted, and an efficient metamodeling of the exposure using the Polynomial Chaos approach has been developed.
9 July 2024 in IEEE Transactions on Antennas and Propagation
This paper presents a parametric statistical path loss model for Wireless Body Area Network (WBAN) communications in the context of a scenario based approach for indoor environments. One of the specificities of WBANs is their numerous sources of variability (subject motion and morphology, antennas, local environment, etc.). We focus here on the influence of the environment, in the case of empty rooms. The model, developed for the first ultra wide band (UWB) sub-band ( B = [3.1, 4.8] GHz), takes into account the sizes of the rooms (assumed to be parallelepipedic and empty) and the wall characteristics (via an average reflectivity coefficient). They also involve an elaborate categorization of environments. The following methodology was implemented, in order to avoid time-consuming and complex experimental campaigns while still having a relatively representative and sufficient number of statistical samples: firstly, a simplified ray tracing code enabled a large number of different rooms to be sampled at moderate computational cost; secondly, part of these simulations was supported by anechoic chamber measurements; and thirdly, the simulations were carried out using elaborate experimental designs, based on a categorization of environments and a fairly comprehensive study of building industry data. The parametric path loss models obtained significantly reduce their variance.