A 3D printed compact unidirectional wideband antenna based on two crossed magneto-electric dipoles is proposed in this paper. The antenna consists in folding the electrical dipole elements, thus the surface of the radiation element is reduced to 0.23λ0*0.23λ0 where λ0 is the wavelength at the lowest operation frequency for a standing wave ratio (SWR) <2.5 corresponding to a reduction factor of 48%. Despite a complex 3D structure, each dipole arm is prototyped using 3D printing technology. The excellent agreement between measured and simulated results (impedance and radiation) demonstrates the quality of such realization process for low cost prototyping of such antenna structure. In dual polarization mode, the measured input impedance bandwidth is 57% from 1.67 GHz to 2.94 GHz with SWR<2.5. Circular polarization mode is obtained by connecting a 90° hybrid coupler circuit. Broadside axial ration (AR) is lower than 3 dB in measure and simulation from 1.5 to 3 GHz.
Reducing the size of directive and wideband antennas operating in the Very High-Frequency band is a major challenge for small satellite integration. At 100 MHz, the wavelength is 3 m, and the size reduction will make the integration easier and reduces fabrication costs. The original technique presented in this paper enables a significant height reduction (up to 50%) of a crossed Magneto-Electric Dipole antenna while maintaining an ultra-wideband operation bandwidth from 93 to 360 MHz (118%). The proposed technique is based on adding frequency reconfigurable capability to a crossed Magneto-Electric Dipole antenna structure. The antenna has been prototyped and experimentally characterized in a large-sized anechoic chamber. The measured results are in excellent agreement with full-wave electromagnetic simulated results.
23 August 2022 in IEEE Antennas and Wireless Propagation Letters
In this paper, a small antenna radiation efficiency measurement method is presented. The method utilizes the antenna quality factor, where it is a modification of the original Q factor method, amended by the loss Q factor of the antenna instead of the radiation Q factor. The method is verified for two kinds of antennas: the first is designed to operate at 868 MHz having a series resonance input impedance, and a second at 433 MHz having a parallel resonance input impedance. The method shows very high accuracy and prevent errors that may occur when using the conventional Wheeler cap method if the stored energy is not treated explicitly, which is considering the same imaginary part of the input impedance or input admittance for series resonance or parallel resonance respectively.
13 November 2006 in IEEE Transactions on Antennas and Propagation
An analysis of the joint antenna-channel problem in ultrawideband communications is carried out in order to provide tools for the performance evaluation of antennas while taking into account the system architecture and the radio link scenarios. Owing to the stochastic character of channels and of antenna close environment, a statistical approach to the problem based on discrete channel models is favored. The distinction between gain and dispersion effects is highlighted, both in a nondirectional and in a fully directional channel model. It is shown that antenna distortion generally has a small effect, but for coherent pulse detection it provides an extra gain in dense multipath channels with respect to ideal antennas and low density channels
This paper investigates the impact of realistic antennas on joint anchor-less localization and indoor characterization based on Impulse Radio (IR) Ultra Wideband (UWB) communications. In this frame, the Maximum Averaged Likelihood (MAL) algorithm and its extended version are considered, both relying on a tree approach consisting in two stages. The first part of the process, which is common to both algorithms, exploits the cross-correlation between received and locally predicted paths. The second stage calculates the averaged likelihood of measured path parameters obtained in the previous step, but different measurements are used for MAL and extended MAL (eMAL). In the first algorithm, only the Angle of Incidence (AoI) and the Time of Arrival (ToA) are considered, whereas the eMAL tree algorithm also accounts for two couples of Angles of Departure (AoDs) and Angles of Arrival (AoAs). The estimation errors of both nodes coordinates and room dimension obtained with the two algorithms are compared for three realistic UWB antennas. Finally, the remaining algorithm-independent ambiguities (i.e. resulting from scenario and geometry) are discussed.