Dongzhuo ZHAO

Dr. Dongzhuo ZHAO

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2020 in Materials
Verified
Journal Article
Open access
PDF file
LLliang luo
liang luo
JQJiangui Qin
Jiangui Qin
DZDongzhuo ZHAO
Dongzhuo ZHAO
ZWZhiwei Wu
Zhiwei Wu
The extended end-plate connections provide excellent performance in resisting seismic loads in high-risk areas. Most scholars’ experiments and finite element studies on this type of joint are focused on the method of applying displacement loads on the beam tip, while the method of applying displacement on the column side has not been the subject of further study. However, the load transmission mechanism of this type of connection is not completely consistent in actual engineering, as the design concept of “strong column weak beam” does not apply to all joints. Therefore, in this paper, the lateral displacement of the applied column is used to simulate the seismic horizontal force to study the mechanical properties of the connection joints of the “weak column and strong beam” under the limit state of earthquake action. Based on the two internal columns (IC-EP1/2) and two edge columns (EC-EP1/2), the failure modes, strength, stiffness, moment–rotation curve, skeleton curve, ductility, and energy dissipation of this type of connection were studied. Experiment results indicated that this type of connection features semi-rigid and partial strength joints. The connection rotation angle of all specimens in the test exceeds 0.05 rad, which suggests it is an ideal seismic joints. Besides, the relationship between the thickness of the end-plate and the diameter of the bolt has a greater impact on the failure mode of the joint. The finite element (FE) analysis models were established for the above connection. The numerical model was validated against experimental results and showed acceptable consistency.

13 July 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DZDongzhuo ZHAO
Dongzhuo ZHAO
ZWZhan Wang
Zhan Wang
JPJianrong Pan
Jianrong Pan
PWPeng Wang
Peng Wang
Due to the limitations of processing errors, test conditions and other factors, geometric similarity errors in scale tests of steel structure joints are difficult to avoid, but the research on this error is little known. Based on the similarity theory and the basic idea of the component method, this paper deduces the similar macro conditions of beam–column end-plate connections and derives the main influencing factors of geometric similarity of these types of structures. Aiming at the factor of the thickness of the end-plate, the formation mechanism of the geometrically incomplete similarity error of this type of node was studied. Through the establishment of accurate finite element models for parameterized analysis, the influence of end plate thickness on incomplete similarity error is analyzed. Based on this model and linear regression analysis methods, the prediction formulas of geometric incomplete similarity errors of beam–column end-plate connections have been established, which can significantly reduce similar errors due to end plate thickness. This article aims to propose a method for simulating the distribution of incompletely similar errors and provide a reference for the research of similar problems.

1 September 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DZDongzhuo ZHAO
Dongzhuo ZHAO
ZWZhan Wang
Zhan Wang
JPJianrong Pan
Jianrong Pan
In most scale model tests of steel frame structures, researchers have usually paid more attention to the outcome of one single experiment rather than to the similitude error between the scale model and the prototype. As a result, only the experimental data of the scale model are obtained rather than the relationship between the scale model and the prototype, which greatly limits scale model tests in the investigation and is also a significant waste of resources. In addition, the effect of the geometric incomplete similarity in steel joints and its contribution to similitude error of the entire frame has rarely been evaluated in the past. This paper is based on similarity theory, investigating the effect of three incomplete geometric similarity factors on the similitude error between a scale model and a prototype, which are the geometric similarity of steel components, the stiffness of steel joints and the stiffness of the column base. Global sensitivity is found by calculation. Furthermore, this paper presents the correlation of the three factors mentioned based on structural sensitivity analysis by use of BP (Back Propagation) algorithm. A method to investigate the similitude error between the scale model and prototype is proposed that can correct similitude errors in the experimental results.

24 December 2016 in International Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
JLJiabin Liu
Jiabin Liu
WQWei Qin
Wei Qin
DZDongzhuo ZHAO
Dongzhuo ZHAO
GDGuoliang Dai
Guoliang Dai