Describes how decentralized control theory can be used to analyze the control of multiple cooperative robotic vehicles. Models of cooperation are discussed and related to the input/output reachability, structural observability, and controllability of the entire system. Whereas decentralized control research in the past has concentrated on using decentralized controllers to partition complex physically interconnected systems, this work uses decentralized methods to connect otherwise independent nontouching robotic vehicles so that they behave in a stable, coordinated fashion. A vector Liapunov method is used to prove stability of two examples: the controlled motion of multiple vehicles along a line and the controlled motion of multiple vehicles in formation. Also presented are three applications of this theory: controlling a formation, guarding a perimeter, and surrounding a facility.
8 March 2019 in IEEE Transactions on Power Systems
This paper describes the design and implementation of a proof-of-concept Pacific dc Intertie (PDCI) wide area damping controller and includes system test results on the North American Western Interconnection (WI). To damp inter-area oscillations, the controller modulates the power transfer of the PDCI, a ±500 kV dc transmission line in the WI. The control system utilizes real-time phasor measurement unit (PMU) feedback to construct a commanded power signal which is added to the scheduled power flow for the PDCI. After years of design, simulations, and development, this controller has been implemented in hardware and successfully tested in both open and closed-loop operation. The most important design specifications were safe, reliable performance, no degradation of any system modes in any circumstances, and improve damping to the controllable modes in the WI. The main finding is that the controller adds significant damping to the modes of the WI and does not adversely affect the system response in any of the test cases. The primary contribution of this paper, to the state of the art research, is the design methods and test results of the first North American real-time control system that uses wide area PMU feedback.
Virtual Power Plants (VPPs) have emerged as a modern real-time energy management architecture that seeks to synergistically coordinate an aggregation of renewable and non-renewable generation systems to overcome some of the fundamental limitations of traditional power grids dominated by synchronous machines. In this survey paper, we review the different existing and emerging feedback control mechanisms and architectures used for the real-time operation of VPPs. In contrast to other works that have mostly focused on the optimal dispatch and economical aspects of VPPs in the hourly and daily time scales, in this paper we focus on the dynamic nature of the system during the faster sub-hourly time scales. The virtual (i.e., software-based) component of a VPP, combined with the power plant (i.e., physics-based) components of the power grid, make VPPs prominent examples of cyber-physical systems, where both continuous-time and discrete-time dynamics play critical roles in the stability and transient properties of the system. We elaborate on this interpretation of VPPs as hybrid dynamical systems, and we further discuss open research problems and potential research directions in feedback control systems that could contribute to the safe development and deployment of autonomous VPPs.
25 January 2018 in IEEE Transactions on Smart Grid
Battery energy storage systems (BESS) are a critical technology for integrating high penetration renewable power on an intelligent electrical grid. As limited energy restricts the steady-state operational state-of-charge (SoC) of storage systems, SoC forecasting models are used to determine feasible charge and discharge schedules that supply grid services. Smart grid controllers use SoC forecasts to optimize BESS schedules to make grid operation more efficient and resilient. This paper presents three advances in BESS SoC forecasting. First, two forecasting models are reformulated to be conducive to parameter optimization. Second, a new method for selecting optimal parameter values based on operational data is presented. Last, a new framework for quantifying model accuracy is developed that enables a comparison between models, systems, and parameter selection methods. The accuracies achieved by both models, on two example battery systems, with each method of parameter selection are then compared in detail. The results of this analysis suggest variation in the suitability of these models for different battery types and applications. The proposed model formulations, optimization methods and accuracy assessment framework can be used to improve the accuracy of SoC forecasts enabling better control over BESS charge/discharge schedules.
High-voltage, direct current (HVDC) transmission lines are increasingly being installed in power systems around the world, and this trend is expected to continue with advancements in power electronics technology. These advancements are also bringing multi-terminal direct current (MTDC) systems closer to practical application. In addition, the continued deployment of phasor measurement units (PMUs) makes dynamic information about a large power system readily available for highly controllable components, such as HVDC lines. All these trends have increased the appeal of modulating HVDC lines and MTDC systems to provide grid services in addition to bulk power transfers. This paper provides a literature survey of HVDC and MTDC damping controllers for interarea oscillations in large interconnected power systems. The literature shows a progression from theoretical research to practical applications. There are already practical implementations of HVDC modulation for lines in point-to-point configuration, although the modulation of MTDC systems is still in the research stage. As a conclusion, this paper identifies and summarizes open questions that remain to be tackled by researchers and engineers.
The integration of various grid-enhancing technologies is crucial for addressing the current challenges faced in controlling transmission grids. The growing variability in energy supply necessitates innovative solutions such as advanced grid monitoring and control systems, energy storage technologies, and flexible grid infrastructure. These technologies are essential for balancing the intermittent nature of renewable energy sources (RESs) and ensuring a stable and reliable electricity supply. This paper offers a comprehensive review of grid-enhancing technologies, incorporating insights from worldwide academic papers and various existing industrial projects that address current challenges and enhance the functionality, reliability, and sustainability of transmission grids. The findings highlight that modernizing grid infrastructure and integrating cutting-edge digital technologies are vital for effectively incorporating a growing number of RESs and enhancing overall grid resilience and efficiency. In addition, the paper explores future opportunities for improving the control of transmission grids, emphasizing the need for continued innovation and investment to meet evolving energy demands and support the transition to a more sustainable energy system.