Traffic signal control is important for intersection safety and efficiency. However, most traffic signal control methods are designed for individual intersections or corridors. Although some adaptive control systems have been developed, the methods used are often proprietary and not published, making it difficult to evaluate their effectiveness. This study proposes an adaptive multi-input and multi-output traffic signal control method that not only can improve network-wide traffic operations in terms of reduced traffic delay and energy consumption, but also is more computationally feasible than existing centralized signal control methods. Considering intersection interactions, a linear dynamic traffic system model was built and adaptively updated to reflect how the signal control input of each intersection affects network-wide vehicle travel delay. Based on the system model, an adaptive linear-quadratic regulator (LQR) was designed to minimize both traffic delay and incremental changes in the control input. The proposed control method was evaluated in a microscopic traffic simulation environment with a 35-intersection network of Bellevue City, Washington. Simulation results show that the proposed method had shorter average traffic delays in the network when compared with the traffic delays controlled by the state-of-the-art max-pressure, self-organizing traffic lights, and independent deep Q network methods.

The automatic control of blast furnace (BF) ironmaking process has always been an important yet arduous task in metallurgic engineering and automation. In this article, a novel Kalman filter-based robust model-free adaptive predictive control (MFAPC) method is proposed for the direct data-driven control of molten iron quality in BF ironmaking. First, a compact-form dynamic linearization-based extended MFAPC method for multivariable molten iron quality control is proposed by generalizing the existing single-variable MFAPC method to multivariable systems. Based on it, a Kalman filter-based robust MFAPC is further proposed considering the problems of data loss and measurement noise in quality detection. Specifically, the robust mechanism in the robust MFAPC combines a novel dynamic linearization method with a concept termed Pseudo-Jacobian matrix to predict the missing data during data loss. After that, a Kalman filter is constructed based on a prediction model to filter the measurement noise. The stability of the proposed control method is analyzed, and various data experiments using actual industrial data are performed to verify the effectiveness of the proposed methods. Note to Practitioners —The extremely complicated dynamics of blast furnace ironmaking process make the model-based controllers difficult to realize in practice. In this article, a novel robust model-free adaptive predictive control method is proposed for direct data-driven control of multivariate molten iron quality in the ironmaking process. This method directly uses the process input and output data to design the multivariable quality controller online by the compact-form dynamic linearization technology and the internal multilayer prediction mechanism, thus avoids the drawback of model-based controllers in troublesome process modeling. Moreover, the proposed method can effectively avoid the influence of data loss and measurement noise on the controller performance with the designed Kalman filter-based robust mechanism. The superiority and practicability of the proposed method are verified using various experiments against actual industrial data.

The problem of fault diagnosis (FD) and fault tolerant control (FTC) for a class of Takagi-Sugeno (T-S) fuzzy stochastic distribution control (SDC) systems subject to sensor and actuator faults is discussed in this paper. First, fuzzy logic models are used to approximate the output probability density function (PDF). Next, an adaptive augmented state/fault diagnosis observer is proposed to estimate the system state, sensor and the actuator faults simultaneously. New expected weights based on the sensor fault estimation information and a PI-type fuzzy feedback fault tolerant (FT) controller are designed to compensate the effect of sensor fault and actuator fault simultaneously. When the sensor fault occurs, the expected objective is redesigned to compensate the sensor fault. Meanwhile, the PI controller can compensate the effect of actuator fault, and the output PDF of the system can still track the desired PDF after the fault occurs. Finally, an example of quality distribution control in chemical reaction process is given to confirm the effectiveness of the algorithm.

In this paper, we consider the optimal coordination problem for distributed energy resources (DERs) including distributed generators and energy storages. We first propose an algorithm based on the push-sum and gradient method to solve the optimal DER coordination problem in a distributed manner. In the proposed algorithm, each DER only maintains a set of variables and updates them through information exchange with a few neighboring DERs over a time-varying directed communication network. We show that the proposed distributed algorithm with appropriately chosen diminishing step-sizes solves the optimal DER coordination problem if the time-varying directed communication network is uniformly jointly strongly connected. Moreover, in order to improve the convergence speed and to reduce the communication burden, we propose an accelerated distributed algorithm with a fixed step-size. We show that the new proposed algorithm exponentially solves the optimal DER coordination problem if the cost functions satisfy an additional assumption and the selected step-size is less than a certain critical value. Both proposed distributed algorithms are validated and evaluated using the IEEE 39-bus system.