Extreme miniaturization of infrared spectrometers is critical for their integration into next-generation consumer electronics, wearables and ultrasmall satellites. In the infrared, there is a necessary compromise between high spectral bandwidth and high spectral resolution when miniaturizing dispersive elements, narrow band-pass filters and reconstructive spectrometers. Fourier-transform spectrometers are known for their large bandwidth and high spectral resolution in the infrared; however, they have not been fully miniaturized. Waveguide-based Fourier-transform spectrometers offer a low device footprint, but rely on an external imaging sensor such as bulky and expensive InGaAs cameras. Here we demonstrate a proof-of-concept miniaturized Fourier-transform waveguide spectrometer that incorporates a subwavelength and complementary-metal–oxide–semiconductor-compatible colloidal quantum dot photodetector as a light sensor. The resulting spectrometer exhibits a large spectral bandwidth and moderate spectral resolution of 50 cm⁻¹ at a total active spectrometer volume below 100 μm × 100 μm × 100 μm. This ultracompact spectrometer design allows the integration of optical/analytical measurement instruments into consumer electronics and space devices.

We report on the operation of passively $Q$-switched waveguide lasers at 1 μm wavelength based on a $\mathrm{graphene}/{\mathrm{WS}}_2$ heterostructure as a saturable absorber (SA). The gain medium is a crystalline $\mathrm{Nd}\text{:}{\mathrm{YVO}}_4$ cladding waveguide produced by femtosecond laser writing. The nanosecond waveguide laser operation at 1064 nm has been realized with the maximum average output power of 275 mW and slope efficiency of 37%. In comparison with the systems based on single ${\mathrm{WS}}_2$ or graphene SA, the lasing $Q$-switched by a $\mathrm{graphene}/{\mathrm{WS}}_2$ heterostructure SA possesses advantages of a higher pulse energy and enhanced slope efficiency, indicating the promising applications of van der Waals heterostructures for ultrafast photonic devices.

We report on the fabrication of three-dimensional waveguide beam splitters in a dielectric Bi₄Ge₃O₁₂ (BGO) crystal by direct femtosecond laser writing. In the laser written tracks of BGO crystal, positive refractive index is induced, resulting in so-called Type I configuration waveguiding cores. The “multiscan” technique is utilized to shape cores with designed cross-sectional geometry in order to achieve guidance at mid-infrared wavelength of 4 μm. The fundamental mode guidance along both TE and TM polarizations has been obtained in the waveguide structures. With this feature, we implement beam splitters from 2D to 3D geometries, and realize 1 × 2, 1 × 3, and 1 × 4 power splitting at 4μm.

Low-loss depressed cladding waveguide architecture is highly attractive for improving the laser performance of waveguide lasers. We report on the design and fabrication of the “ear-like” waveguide structures formed by a set of parallel tracks in neodymium-doped yttrium aluminum garnet (Nd:YAG) crystal via femtosecond laser writing. The obtained “ear-like” waveguides are with more symmetric mode profiles and lower losses by systematically comparing the guiding properties of two kinds of normal cladding waveguide. Efficient waveguide lasers are realized based on the designed structure in both continuous wave and pulsed regimes. Combined the high-gain from cladding waveguide and special “ear-like” structure, a passively fundamentally Q-switched laser with the narrow pulse width and the high repetition rate has been obtained by using tin diselenide (SnSe₂) as saturable absorber.