Nitrogen-doped lithium niobate (LiNbO3:N) thin films were successfully fabricated on a Si-substrate using a nitrogen plasma beam supplied through a radio-frequency plasma apparatus as a dopant source via a pulsed laser deposition (PLD). The films were then characterized using X-Ray Diffraction (XRD) as polycrystalline with the predominant orientations of (012) and (104). The perfect surface appearance of the film was investigated by atomic force microscopy and Hall-effect measurements revealed a rare p-type conductivity in the LiNbO3:N thin film. The hole concentration was 7.31 × 1015 cm−3 with a field-effect mobility of 266 cm2V−1s−1. X-ray Photoelectron Spectroscopy (XPS) indicated that the atom content of nitrogen was 0.87%; N atoms were probably substituted for O sites, which contributed to the p-type conductivity. The realization of p-type LiNbO3:N thin films grown on the Si substrate lead to improvements in the manufacturing of novel optoelectronic devices.
A series of heavily Fe-doped LiNbO3 (LN:Fe) crystals were grown via the Czochralski method. The dark- and photo-conductivity of the 5.0 wt.% Fe-doped LiNbO3 crystal reached 3.30 × 10−8 Ω−1 cm−1 and 1.46 × 10−7 Ω−1 cm−1 at 473 nm, which are about 7 and 5 orders of magnitude higher than that of congruent LiNbO3, respectively. Then, a p-n heterojunction was fabricated by depositing the heavily Fe-doped LiNbO3 on a p-type Si substrate using the pulsed laser deposition. The current–voltage curve of the LN:Fe/Si heterojunction presents a well-defined behavior with a turn-on voltage of 2.9 V. This LN:Fe/Si heterojunction gives an excellent prototype device for integrated optics and electro-photonics.