Numerous studies have indicated that intrinsic defects in lithium niobate (LN) dominate its physical properties. In an Nb-rich environment, the structure that consists of a niobium anti-site with four lithium vacancies is considered the most stable structure. Based on the density functional theory (DFT), the specific configuration of the four lithium vacancies of LN were explored. The results indicated the most stable structure consisted of two lithium vacancies as the first neighbors and the other two as the second nearest neighbors of Nb anti-site in pure LN, and a similar stable structure was found in the doped LN. We found that the defects dipole moment has no direct contribution to the crystal polarization. Spontaneous polarization is more likely due to the lattice distortion of the crystal. This was verified in the defects structure of Mg2+, Sc3+, and Zr4+ doped LN. The conclusion provides a new understanding about the relationship between defect clusters and crystal polarization.
MgO-doped LiNbO3 (LN:Mg) is famous for its high resistance to optical damage, but this phenomenon only occurs in visible and infrared regions, and its photorefraction is not decreased but enhanced in ultraviolet region. Here we investigated a series of ZrO2 co-doped LN:Mg (LN:Mg,Zr) regarding their ultraviolet photorefractive properties. The optical damage resistance experiment indicated that the resistance against ultraviolet damage of LN:Mg was significantly enhanced with increased ZrO2 doping concentration. Moreover, first-principles calculations manifested that the enhancement of ultraviolet damage resistance for LN:Mg,Zr was mainly determined by both the increased band gap and the reduced ultraviolet photorefractive center O2−/−. So, LN:Mg,Zr crystals would become an excellent candidate for ultraviolet nonlinear optical material.
Nitrogen-doped lithium niobate (LiNbO3:N) thin films were successfully fabricated on a Si-substrate using a nitrogen plasma beam supplied through a radio-frequency plasma apparatus as a dopant source via a pulsed laser deposition (PLD). The films were then characterized using X-Ray Diffraction (XRD) as polycrystalline with the predominant orientations of (012) and (104). The perfect surface appearance of the film was investigated by atomic force microscopy and Hall-effect measurements revealed a rare p-type conductivity in the LiNbO3:N thin film. The hole concentration was 7.31 × 1015 cm−3 with a field-effect mobility of 266 cm2V−1s−1. X-ray Photoelectron Spectroscopy (XPS) indicated that the atom content of nitrogen was 0.87%; N atoms were probably substituted for O sites, which contributed to the p-type conductivity. The realization of p-type LiNbO3:N thin films grown on the Si substrate lead to improvements in the manufacturing of novel optoelectronic devices.
A series of heavily Fe-doped LiNbO3 (LN:Fe) crystals were grown via the Czochralski method. The dark- and photo-conductivity of the 5.0 wt.% Fe-doped LiNbO3 crystal reached 3.30 × 10−8 Ω−1 cm−1 and 1.46 × 10−7 Ω−1 cm−1 at 473 nm, which are about 7 and 5 orders of magnitude higher than that of congruent LiNbO3, respectively. Then, a p-n heterojunction was fabricated by depositing the heavily Fe-doped LiNbO3 on a p-type Si substrate using the pulsed laser deposition. The current–voltage curve of the LN:Fe/Si heterojunction presents a well-defined behavior with a turn-on voltage of 2.9 V. This LN:Fe/Si heterojunction gives an excellent prototype device for integrated optics and electro-photonics.
We grew a series of co-doped LiNbO3 crystals with fixed 1.5 mol % ZrO2 and various MgO concentrations (1.0, 3.0, 4.0, 6.0 mol %), and investigated their optical properties and defect structures. By 3.0 mol % MgO co-doping, the optical damage resistance at 532 nm reached 6.5 × 106 W/cm2, while the phase-matching temperature for doubling 1064 nm was only 29.3 °C—close to room temperature—which was conducive to realizing the 90° phase matching at room temperature by slightly modulating the incident angle of the fundamental beam. Notably, we found that the phase-matching temperature increased linearly with the increase of MgO doping, and this linear dependence helped us to grow the high-quality crystal for room temperature 90° phase matching. Moreover, the defect analysis indicated that the linear tuning of phase-matching temperature might be attributed to + neutral pairs in crystals.