Sajid Ali

Dr. Sajid Ali

Imam Abdulrahman Bin Faisal University
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Nasir HaririNasir Hariri
Nasir Hariri
MAMohammed Ali AlMutawa
Mohammed Ali AlMutawa
IBRAHIM SUFIAN OSMANIBRAHIM SUFIAN OSMAN
IBRAHIM SUFIAN OSMAN
IAIbrahim Khalil Almadani
Ibrahim Khalil Almadani
AAAbdulilah Mustafa Almahdi
Abdulilah Mustafa Almahdi
SASajid Ali
Sajid Ali
Today, the world continuously investigates the promising potential of advanced and optimized technologies for harvesting green renewable energy sources, such as a solar tracking system (STS). This study presents an actual implementation of a single-axis solar tracking system (SAST), where an azimuth control scheme is developed to precisely follow the sun’s orientation. This is demonstrated by computing in real-time the optimal azimuth angle based on the actual altitude, date, and time using an embedded microcontroller. At the same time, experimental comparisons using the azimuth-based control method compared with the proportional, integral, derivative (PID) control scheme and fixed-tilt PV systems (FTPV) are derived. Experimental results show that the developed azimuth solar tracker can autonomously follow the sun’s orientation primarily from time and location-based information and independent from the actual solar irradiance. Nevertheless, the electrical energies gained from all three tested systems revealed that using the sensor-based STS would increase the net energy production by 12.68% compared to the azimuth-based SAST, with an energy production increase of 7.7%. In addition, energy consumption by the azimuth-based STS is 65% greater than the energy consumption of a sensor-based STS due to the continuous movements of the tracker, regardless of the increase or change in power production within short periods.

30 March 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
KAKhalid Abdulkhaliq M. Alharbi
Khalid Abdulkhaliq M. Alharbi
MAMohammed Nasser Alshahrani
Mohammed Nasser Alshahrani
NUNaeem Ullah
Naeem Ullah
NKNaseer M Khan
Naseer M Khan
Marek KrawczukMarek Krawczuk
Marek Krawczuk
SASajid Ali
Sajid Ali
This report is devoted to the study of the flow of MHD nanofluids through a vertical porous plate with a temperature-dependent surface tension using the Cattaneo–Christov heat flow model. The energy equation was formulated using the Cattaneo–Christov heat flux model instead of Fourier’s law of heat conduction. The Tiwari–Das model was used to take into account the concentration of nanoparticles when constructing the momentum equation. The problem is described mathematically using the boundary layer approach as a PDE, which is then converted into an ODE with the help of the transformation process. The solution finding process was completed by running the bvp4c code in MATLAB. A quantitative analysis of the influence of some newly occurring parameters on physical quantities was carried out using graphics. The addition of nanoparticles to the base fluid leads to an increase in both skin friction and thermal conductivity. The increase in thermal conductivity is the advantage, while the increase in skin friction is the disadvantage of the nanoparticle concentration. Marangoni convection has proven to be one of the most cost-effective tools available that can reduce skin friction. Marangoni convection improves the heat transfer coefficient during suction but decreases the heat transfer coefficient during the injection.

1 February 2023
Verified
Book Chapter
Open access
PDF file
Arshad JamalArshad Jamal
Arshad Jamal
HAHassan M. Al-Ahmadi
Hassan M. Al-Ahmadi
FBFarhan Muhammad Butt
Farhan Muhammad Butt
MIMudassir Iqbal
Mudassir Iqbal
MAMeshal Almoshaogeh
Meshal Almoshaogeh
SASajid Ali
Sajid Ali
Intelligent traffic control at signalized intersections in urban areas is vital for mitigating congestion and ensuring sustainable traffic operations. Poor traffic management at road intersections may lead to numerous issues such as increased fuel consumption, high emissions, low travel speeds, excessive delays, and vehicular stops. The methods employed for traffic signal control play a crucial role in evaluating the quality of traffic operations. Existing literature is abundant, with studies focusing on applying regression and probability-based methods for traffic light control. However, these methods have several shortcomings and can not be relied on for heterogeneous traffic conditions in complex urban networks. With rapid advances in communication and information technologies in recent years, various metaheuristics-based techniques have emerged on the horizon of signal control optimization for real-time intelligent traffic management. This study critically reviews the latest advancements in swarm intelligence and evolutionary techniques applied to traffic control and optimization in urban networks. The surveyed literature is classified according to the nature of the metaheuristic used, considered optimization objectives, and signal control parameters. The pros and cons of each method are also highlighted. The study provides current challenges, prospects, and outlook for future research based on gaps identified through a comprehensive literature review.

26 April 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
SASajid Ali
Sajid Ali
MHMuhammad A. Hawwa
Muhammad A. Hawwa
UBUthman Baroudi
Uthman Baroudi
Water leaks from pipelines have large economic and ecological impacts. Minimizing water loss from supply pipelines has favorable effects on the environment as well as on energy consumption. This paper aims to understand the effect of the geometry of a leaking crack in a pipe wall by examining fluid flow characteristics, namely pressure and velocity distributions, inside the pipe. Practical observations show that the cause of wall rupture influences the geometry of cracks formed in a pipe wall, impacting aspects such as excessive pressure, corrosion. Knowledge of fluid flow characteristics could help in detecting and identifying leak characteristics at an early stage and assist in improving the energy and resource efficiency of water supply services. An experimental setup is developed to detect water leakage in a pipe when the leak is at an early stage and is difficult to detect by visual inspection. A computational fluid dynamic (CFD) model is developed using the COMSOL software. A comprehensive analysis of the effect of leak geometry on pressure and velocity distributions along the pipe is carried out while considering factors such as different pipe sizes, leak geometries, and steady-state flow conditions. It is observed that both velocity and pressure magnitudes rapidly fluctuate in the vicinity of leaks. Leaking cracks with slot, circle, and square shapes are found to generate distinguishing pressure and velocity distributions along the pipe. Thus, the geometry of the leaking crack and potentially its root cause(s) could be predicted by measuring velocity and pressure distributions.

1 July 2019
Verified
Conference Paper
Closed access
SKSikandar Khan
Sikandar Khan
MHMamon M. Horoub
Mamon M. Horoub
SSSaifullah Shafiq
Saifullah Shafiq
SASajid Ali
Sajid Ali
UBUmar Nawaz Bhatti
Umar Nawaz Bhatti
The vehicle suspension system is one of the main design factors in the automobile industry that can exponentially increase the level of customers comport and satisfaction. Various design strategies can be used to get optimum values for the various parameters in the suspension system. In this paper, a passive vehicle suspension system was modeled, and the system was optimized using Genetic Algorithm (GA) optimization technique. The GA is based on natural evolution and is successfully applied to various real-world problems. The variance of the dynamic load resulting from the vibrating vehicle is taken as the performance measure (i.e., objective function) of the suspension system. During the application of GA, first appropriate mutation rate, crossover rate, and population size were evaluated which were used to calculate optimum values for the parameters in the suspension system. The optimum values for the suspension system correspond to minimum values of the settling time and maximum overshoot and thus helps in decreasing the effect of the dynamic loads by reducing the vehicle vibration.

20 September 2017 in European Journal of Computational Mechanics
Verified
Journal Article
Closed access
SASajid Ali
Sajid Ali
MKMuhammad Ali Kamran
Muhammad Ali Kamran
SKSikandar Khan
Sikandar Khan
The fluid sloshing in partially filled road tankers has significantly increased the number of road accidents for the last few decades. Significant research is needed to investigate and to come up with optimum baffles designs that can help to increase the rollover stability of the partially filled tankers. In this investigation, a detailed analysis of the anti-slosh effectiveness of different baffle configurations is presented. This investigation extends the already available studies in the literature by introducing new modified rectangular tank’s shapes that correspond to maximum rollover stability as compared to the already available standard tank designs. The various baffles configurations that are analysed in this study are horizontal, vertical, vertical–horizontal and diagonal. In the current study, numerical investigations are performed for rectangular, elliptical and circular tank shapes. Lateral sloshing, caused by constant radius turn manoeuvre, was simulated numerically using the volume-of-fluid method, and effect of the different baffle configurations was analysed. The effect of tank fill levels on sloshing measured in terms of horizontal force and pressure moments is also reported for with and without baffles configurations. Vertical baffles were the most effective at reducing sloshing in modified rectangular tanks, whereas a combination of horizontal and vertical baffles gave better results for the circular and elliptical tanks geometries.