Chronic obstructive pulmonary disease (COPD) is related to endothelial dysfunction and the impaired generation of nitric oxide (NO) from L-arginine by the endothelial NO synthase (eNOS). The relationship between eNOS dysfunctionality and airway inflammation is unknown. We assessed serum asymmetric and symmetric dimethylarginine (ADMA and SDMA) and nitrite/nitrate concentrations, indicators of eNOS function, in patients with COPD and correlated them with markers of inflammation. We recruited 15 control smokers, 29 patients with stable and 32 patients with exacerbated COPD requiring hospitalization (20 of them were measured both at admission and discharge). Serum L-arginine, ADMA, SDMA, nitrite and nitrate were measured and correlated with airway inflammatory markers (fractional exhaled nitric oxide concentration - FENO, sputum nitrite and nitrate, sputum cellularity), serum C-reactive protein - CRP, white blood cell count, lung function and blood gases. ANOVA, t-tests and Pearson correlation were used (mean ± SD or geometric mean ± geometric SD for nitrite/nitrate). Serum L-arginine/ADMA, a marker of substrate availability for eNOS, was lower in stable (214 ± 58, p < 0.01) and exacerbated COPD (231 ± 68, p < 0.05) than in controls (287 ± 64). The serum concentration of SDMA, a competitor of L-arginine transport, was elevated during an exacerbation (0.78 ± 0.39 μM) compared to stable patients (0.53 ± 0.14 μM, p < 0.01) and controls (0.45 ± 0.14 μM, p < 0.001). ADMA correlated with blood neutrophil percentage (r = 0.36, p < 0.01), FENO (r = 0.42, p < 0.01) and a tendency for positive association was observed to sputum neutrophil count (r = 0.33, p = 0.07). SDMA correlated with total sputum inflammatory cell count (r = 0.61, p < 0.01) and sputum neutrophil count (r = 0.62, p < 0.01). Markers were not related to lung function, blood gases or CRP. L-arginine/ADMA was unchanged, but serum SDMA level decreased (0.57 ± 0.42 μM, p < 0.05) after systemic steroid treatment of the exacerbation. Serum nitrite level increased in stable and exacerbated disease (4.11 ± 2.12 and 4.03 ± 1.77 vs. control: 1.61 ± 1.84 μM, both p < 0.001). Our data suggest impaired eNOS function in stable COPD, which is transiently aggravated during an exacerbation and partly reversed by systemic steroid treatment. Serum ADMA and SDMA correlate with airway inflammatory markers implying a possible effect of anti-inflammatory therapy on endothelial dysfunction. Serum nitrite can serve as a compensatory pool for impaired endothelial NO generation.

This study assessed the distribution of heavy metals in the gills, kidney, and liver, correlated with the severity of histopathological changes, of three fish species with different feeding habitats (Barbus barbus, Squalius cephalus, and Chondrostoma nasus) from the Crișul Negru river, Romania. The levels of copper (Cu), chromium (Cr), cadmium (Cd), lead (Pb), and zinc (Zn) in fish tissues were measured by atomic absorption spectrophotometry. Histopathology and the expressions of TNF-α and proliferation cell nuclear antigen (PCNA) were investigated by immunohistochemistry and Western blot. Our data suggest a significant correlation between the bioconcentration level of metals and structural changes. The carnivorous species was the most affected compared to the omnivorous and herbivorous ones, and the most affected organ was the kidney. Moreover, the correlation of tissue damage with the PCNA and TNF-α expression levels revealed that the herbivorous species presented less extended lesions, likely due to higher activated repair mechanisms and lower levels of inflammation. In conclusion, our data and the subsequent statistical analysis suggest that feeding behavior could be correlated with the histopathological alterations and might be used for a more profound evaluation of aquatic environment safety and analysis of aquatic ecosystems.

Following the latest developments, bio-based polyesters, obtained from renewable raw materials, mainly carbohydrates, can be competitive for the fossil-based equivalents in various industries. In particular, the furan containing monomers are valuable alternatives for the synthesis of various new biomaterials, applicable in food additive, pharmaceutical and medical field. The utilization of lipases as biocatalysts for the synthesis of such polymeric compounds can overcome the disadvantages of high temperatures and metal catalysts, used by the chemical route. In this work, the enzymatic synthesis of new copolymers of ε-caprolactone and 5-hydroxymethyl-2-furancarboxylic acid has been investigated, using commercially available immobilized lipases from Candida antarctica B. The reactions were carried out in solvent-less systems, at temperatures up to 80 °C. The structural analysis by MALDI TOF-MS, NMR, and FT-IR spectroscopy confirmed the formation of cyclic and linear oligoesters, with maximal polymerization degree of 24 and narrow molecular weight distribution (dispersity about 1.1). The operational stability of the biocatalyst was explored during several reuses, while thermal analysis (TG and DSC) indicated a lower thermal stability and higher melting point of the new products, compared to the poly(ε-caprolactone) homopolymer. The presence of the heterocyclic structure in the polymeric chain has promoted both the lipase-catalyzed degradation and the microbial degradation. Although, poly(ε-caprolactone) is a valuable biocompatible polymer with important therapeutic applications, some drawbacks such as low hydrophilicity, low melting point, and relatively slow biodegradability impeded its extensive utilization. In this regard the newly synthesized furan-based oligoesters could represent a “green” improvement route.

In situ gels have been developed as an innovative strategy to prolong corneal residence time and enhance drug absorption compared to traditional eye drops. Our study aimed to formulate an ophthalmic in situ gel with a combination of two thermosensitive poloxamers, P407 and P188, in an optimal ratio not only to increase the time of action but also to increase the solubility of selected antibiotics for the treatment of ophthalmic infections. Two BSC II class substances, Azithromycin and Ofloxacin, with different mechanisms of action, have been incorporated into the in situ gel system after determining their solubility. The antibiotics-loaded in situ gel formulation was evaluated for its clarity, pH, rheological properties, and gel characteristics of gelling time, temperature, and capacity. The formulation demonstrated satisfactory clarity, appropriate pH, effective gelation properties in simulated tear fluid, and suitable rheological characteristics. In addition, APIs release insight has been studied through a dissolution test, and the effectivity against sensitive and resistant bacterial strains has been proved through the antimicrobial study. Therefore, our in situ gel system based on thermosensitive poloxamers, with two hydrophobic antibiotics, AZM and OFX, can be considered a valuable approach for ophthalmic drug delivery with an enhancement of the antibiotics bioavailability through increasing the contact time with the ocular surface and enhancing patient compliance.

In this paper the preparation and detailed characterization of designed polyurethanes (SPURs) are reported for potential biological, biomedical and/or pharmaceutical applications. Importantly, in order to fulfill these goals all reactants and solvents used were selected according to the proposal of EUR-8 Pharmacopoeia. For the synthesis, a novel strategy was introduced and elaborated. A series of SPUR samples was prepared from poly(ε-caprolactone)-diol, 1,6-hexamethylene diisocyanate and sucrose as a chain extender/crosslinking agent to obtain sucrose containing polyurethanes. In addition, the mol ratios of the sucrose were varied within an order of magnitude. The prepolymers and the products of the syntheses were investigated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and infrared spectroscopy (IR), respectively. It was found that the reactivity of the eight free hydroxyl groups of sucrose are different, and after curing the SPUR samples at 60 °C no free isocyanate groups can be observed. Furthermore, swelling experiments performed with various solvents of different polarities revealed that the highest degree of swelling took place in dimethyl-sulfoxide. However, low degrees of swelling were recognized in water and hexane. It is important to note that the gel contents were around 90% in all cases, which demonstrate that the crosslinking was almost complete. In addition, the kinetics of swelling were also evaluated and successfully modeled. The crosslink densities were calculated from the data of the swelling experiments by means of the Flory-Rehner equation. Unexpectedly, it was found that the crosslink density decreased with the increasing sucrose content also in line with the results obtained by relaxation modulus experiments and dynamic mechanical analysis (DMA). The Tg and Tm of SPUR samples, determined from DSC and DMA measurements, were around −57 °C and 27 °C, respectively. According to the mechanical tests the SPUR samples showed high elongation at break values, i.e., high flexibilities. Furthermore, the stress-strain curves were also modeled and discussed.

In this report, the synthesis of poly(ω-pentadecalactone) (PPDL) (co)polymers and their incorporation into polyurethanes (PUs) are reported. Optimal conditions for the ring-opening polymerization (ROP) of ω-pentadecalactone (PDL) using dibutyltin dilaurate catalyst were established. For the synthesis of linear and crosslinked PUs, 50 kDa poly(ε-caprolactone) (PCL) and 1,6-hexamethylenediisocyanate (HDI) were used. The obtained polyurethanes were characterized by Attenuated Total Reflectance Fourier-Transform Infrared spectroscopy (AT-FTIR), differential scanning calorimetry (DSC), and dynamical mechanical analysis (DMA). The DMA of the selected sample showed a rubbery plateau on the storage modulus versus temperature curve predicting shape memory behavior. Indeed, good shape memory performances were obtained with shape fixity (R_f) and shape recovery (R_r) ratios.