By the end of 2012, China had launched 16 BeiDou-2 navigation satellites that include six GEOs, five IGSOs and five MEOs. This has provided initial navigation and precise pointing services ability in the Asia-Pacific regions. In order to assess the navigation and positioning performance of the BeiDou-2 system, Wuhan University has built up a network of BeiDou Experimental Tracking Stations (BETS) around the World. The Position and Navigation Data Analyst (PANDA) software was modified to determine the orbits of BeiDou satellites and provide precise orbit and satellite clock bias products from the BeiDou satellite system for user applications. This article uses the BeiDou/GPS observations of the BeiDou Experimental Tracking Stations to realize the BeiDou and BeiDou/GPS static and kinematic precise point positioning (PPP). The result indicates that the precision of BeiDou static and kinematic PPP reaches centimeter level. The precision of BeiDou/GPS kinematic PPP solutions is improved significantly compared to that of BeiDou-only or GPS-only kinematic PPP solutions. The PPP convergence time also decreases with the use of combined BeiDou/GPS systems.
Since the first pair of BeiDou satellites was deployed in 2000, China has made continuous efforts to establish its own independent BeiDou Navigation Satellite System (BDS) to provide the regional radio determination satellite service as well as regional and global radio navigation satellite services, which rely on the high quality of orbit and clock products. This article summarizes the achievements in the precise orbit determination (POD) of BDS satellites in the past decade with the focus on observation and orbit dynamic models. First, the disclosed metadata of BDS satellites is presented and the contribution to BDS POD is addressed. The complete optical properties of the satellite bus as well as solar panels are derived based on the absorbed parameters as well the material properties. Secondly, the status and tracking capabilities of the L-band data from accessible ground networks are presented, while some low earth orbiter satellites with onboard BDS tracking capability are listed. The topological structure and measurement scheme of BDS Inter-Satellite-Link (ISL) data are described. After highlighting the progress on observation models as well as orbit perturbations for BDS, e.g., phase center corrections, satellite attitude, and solar radiation pressure, different POD strategies used for BDS are summarized. In addition, the urgent requirement for error modeling of the ISL data is emphasized based on the analysis of the observation noises, and the incompatible characteristics of orbit and clock derived with L-band and ISL data are illuminated and discussed. The further researches on the improvement of phase center calibration and orbit dynamic models, the refinement of ISL observation models, and the potential contribution of BDS to the estimation of geodetic parameters based on L-band or ISL data are identified. With this, it is promising that BDS can achieve better performance and provides vital contributions to the geodesy and navigation.
Five new-generation BeiDou-3 experimental satellites, called BeiDou-3e, have been launched into inclined geosynchronous orbit (IGSO) and medium orbit (MEO) since March 2015. In addition to newly designed signals and intersatellite links, different satellite buses, updated rubidium atomic frequency standards (RAFSs), and new passive hydrogen masers (PHMs) have been used. Using 15 stations, mainly in the Asia–Pacific region, we determined orbits and clock for both the BeiDou-3e and the regional BeiDou-2 satellites using the Extend CODE (Center for Orbit Determination in Europe) Orbit Model (ECOM). The orbit consistency, indicated by 3D orbit boundary discontinuity, is 50–70 and 40–60 cm for BeiDou-3e IGSO and MEO satellites, respectively, and better than 15 cm in radial component. Satellite laser ranging (SLR) validation gives about 17 and 10 cm for BeiDou-3e IGSO and MEO satellites. The BeiDou-3e satellites orbits show slightly better performance than the BeiDou-2 satellites as indicated by SLR. However, errors depending on the sun elongation angle were identified in SLR residuals for the BeiDou-3e IGSO C32 satellite, while such errors did not exist for BeiDou-2 IGSO/MEO and BeiDou-3e MEO satellites. No orbit accuracy degeneration for BeiDou-3e IGSO and MEO satellites was observed when the elevation angle (β angle) of the sun above the orbital plane was between − 4° and + 4°. In that case, the BeiDou-2 IGSO and MEO satellites are in orbit normal (ON) mode. An analysis of the yaw attitude identified that BeiDou-3e satellites did not use the ON mode, but experienced midnight- and noon-point maneuvers when the β angle is approximately between − 3° and + 3°. Compared with BeiDou-2 satellites, the onboard clocks of the BeiDou-3e IGSO satellites showed dramatic improved performance. The stability of BeiDou-3e IGSO satellites can be compared to the latest type of RAFSs employed onboard the GPS IIF satellites as well as the PHMs used onboard the Galileo satellites.
1 January 2019 in NAVIGATION: Journal of the Institute of Navigation
By end‐2018, the Chinese BeiDou satellite system (BDS) has entered its third phase of global scale coverage (BDS‐3). This study presents and validates a modified modeling aspect concerning an intersatellite link (ISL) hardware delay estimation. The precise orbit determination (POD) results of BDS‐3 demonstrate this aspect along with calibrated phase center offsets (PCOs) of the ISL terminal to help improve the orbit accuracy. After onboarding the ISL data, two additional sets of POD solutions using regional and global ground stations are conducted. About a 40% improvement can be achieved for regional cases and 20% for global cases after ISL data were used for POD. The best POD performance solution is obtained with observations from both the global ground stations and ISL when the averaged 3D root mean squares of the orbit overlapping differences can reach around 20 cm and the signal‐in‐space range errors (SISREs) obtained by 6‐hour predicted clock and orbit solutions show an average value of 25 cm.