In this article, a fractional-order proportional-integral-differential (FOPID) controller and its modified structure, called a MFOPID controller, are presented. To guarantee optimal system performance, the gains of the proposed FOPID and MFOPID controllers are well-tuned, employing the Jellyfish Search Optimizer (JSO), a novel and highly effective bioinspired metaheuristic approach. The proposed controllers are assessed in a hybrid system with two domains, where each domain contains a hybrid of conventional (gas, reheat, and hydro) and renewable generation sources (solar and wind). For a more realistic analysis, the presented system model includes practical limitations with nonlinear characteristics, such as governor dead zone/band (GDZ/GDB), boiler dynamics, generation rate limitation/constraint (GRL/GRC), system uncertainties, communication time delay (CTD), and load changes. The suggested methodology outperforms some newly developed heuristic techniques, including fitness-dependent optimizer (FDO), sine-cosine algorithm (SCA), and firefly algorithm (FA), for the interconnected power system (PS) of two regions with multiple generating units. Furthermore, the proposed MFOPID controller is compared with JSO-tuned PID/FOPID and PI controllers to ascertain its superiority. The results signify that the presented control method and its parametric optimization significantly outperforms the other control strategies with respect to minimum undershoot and peak overshoot, settling times, and ITSE in the system’s dynamic response. The sensitivity analysis outcomes imply that the proposed JSO-MFOPID control method is very reliable and can effectively stabilize the load frequency and interconnection line in a multi-area network with interconnected PS.

This work provides an enhanced novel cascaded controller-based frequency stabilization of a two-region interconnected power system incorporating electric vehicles. The proposed controller combines a cascade structure comprising a fractional-order proportional integrator and a proportional derivative with a filter term to handle the frequency regulation challenges of a hybrid power system integrated with renewable energy sources. Driver training-based optimization, an advanced stochastic meta-heuristic method based on human learning, is employed to optimize the gains of the proposed cascaded controller. The performance of the proposed novel controller was compared to that of other control methods. In addition, the results of driver training-based optimization are compared to those of other recent meta-heuristic algorithms, such as the imperialist competitive algorithm and jellyfish swarm optimization. The suggested controller and design technique have been evaluated and validated under a variety of loading circumstances and scenarios, as well as their resistance to power system parameter uncertainties. The results indicate the new controller’s steady operation and frequency regulation capability with an optimal controller coefficient and without the prerequisite for a complex layout procedure.

In this article, a simple method is developed to design a highly miniaturized tri-band bandpass filter (BPF) utilizing two asymmetric coupled resonators with one step discontinuity and one uniform impedance resonator (UIR) for worldwide interoperability for microwave access (WiMAX) and radio frequency identification (RFID) applications. The first and second passbands located at 3.7 GHz and 6.6 GHz are achieved through two asymmetric coupled step impedance resonators (SIRs), while the third passband, centered at 9 GHz, is achieved using a half-wavelength UIR, respectively. The fundamental frequencies of this BPF are implemented by tuning the physical length ratio (α) and impedance ratio (R) of the asymmetric SIRs. The proposed filter is designed and fabricated with a circuit dimension of 13.69 mm × 25 mm (0.02 λg × 0.03 λg), where λg represents the guided wavelength at the first passband. The experimental and measured results are provided with good matching.

In seaports, low-carbon energy systems and energy efficiency have become increasingly important as a result of the evolution of environmental and climate change challenges. In order to ensure the continued success of seaports, technological advancements must be introduced to a number of systems, such as seaport vehicles, harbor cranes, and the power sources of berthed ships. Harbor areas might need a microgrid to handle these aspects. Typically, microgrids that substitute conventional generator units with renewable energy sources (RES) suffer from system inertia problems, which adversely affect microgrid frequency stability. A load frequency controller (LFC) based on a novel modified proportional integral derivative with filter (MPIDF) is presented in this paper for enhancing the performance of marine microgrid system (MMS). The serval optimization algorithm (SOA), a recent bio-inspired optimization algorithm, is used to optimize the MPIDF controller coefficients. This controller is tested on a marine microgrid containing a number of RES such as wind turbine generators, sea wave energy, and solar generation. The efficacy of the proposed MPIDF controller is verified with respect to other controllers such as PIDF and PI. Similarly, the proposed meta-heuristic algorithm is validated as compared to other algorithms including particle swarm optimization (PSO), ant colony optimization (ACO), and jellyfish swarm optimization (JSO). This study also evaluates the robustness of the proposed controller to different perturbations in step load, changes in system parameters, and other parameter variations.

Long short-term memory (LSTM) has been effectively used to represent sequential data in recent years. However, LSTM still struggles with capturing the long-term temporal dependencies. In this paper, we propose an hourglass-shaped LSTM that is able to capture long-term temporal correlations by reducing the feature resolutions without data loss. We have used skip connections in non-adjacent layers to avoid gradient decay. In addition, an attention process is incorporated into skip connections to emphasize the essential spectral features and spectral regions. The proposed LSTM model is applied to speech enhancement and recognition applications. The proposed LSTM model uses no future information, resulting in a causal system suitable for real-time processing. The combined spectral feature sets are used to train the LSTM model for improved performance. Using the proposed model, the ideal ratio mask (IRM) is estimated as a training objective. The experimental evaluations using short-time objective intelligibility (STOI) and perceptual evaluation of speech quality (PESQ) have demonstrated that the proposed model with robust feature representation obtained higher speech intelligibility and perceptual quality. With the TIMIT, LibriSpeech, and VoiceBank datasets, the proposed model improved STOI by 16.21%, 16.41%, and 18.33% over noisy speech, whereas PESQ is improved by 31.1%, 32.9%, and 32%. In seen and unseen noisy situations, the proposed model outperformed existing deep neural networks (DNNs), including baseline LSTM, feedforward neural network (FDNN), convolutional neural network (CNN), and generative adversarial network (GAN). With the Kaldi toolkit for automated speech recognition (ASR), the proposed model significantly reduced the word error rates (WERs) and reached an average WER of 15.13% in noisy backgrounds.

An ultra-compact triple-band bandpass filter based on dual-mode quarter-wave resonator for GSM, GPS, and WiFi applications is presented in this study. The filter consists of three quarter-wave resonators assisting in controlling each passband independently. The first operating frequency band is obtained by the direct-feed resonator which acts as a source to load coupling for the inner two resonators which are operating at higher frequency bands. The outermost resonator is coupled to the inner loaded resonators, thus a pair of transmission zeros between each passband can be excited and hence high-frequency selectivity can be obtained. To miniaturize the overall size of the filter, all resonators are folded and are jointly connected through a common metallic via with the ground. The design has a symmetric structure therefore, even-odd mode analysis method is applied to obtain the three controllable operating frequency bands. The first operating band is centered at 850 MHz which caters for GSM applications, while the second and third frequency bands centered at 1.57 GHz and 2.4 GHz fall in the GPS and WiFi wireless applications. The filter with an ultra-compact size of 0.10 λg × 0.09 λg (0.009λg2) despite feed lines (λg is the waveguide length centered at 850 MHz) is designed, fabricated and measured for the purpose of validation. Both the simulated and measured results are in good agreement and endorse the design concept.