The development of technologies to improve the performance of photovoltaic (PV) module integrated converters (MICs) is fundamental to increase the use of distributed generation systems with photovoltaic power source in large urban centers, mainly for complex residential roofs. For two-stage PV MICs, high step-up DC-DC converters are required to boost the low PV module voltage to a higher voltage, in order to suit the DC bus voltage requirements of grid-tied inverters. Thus, to support researchers interested in developing DC-DC power conversion for PV microinverters, this paper classifies the DC-DC converters according to their operational and constructive characteristics and presents some elementary voltage-boosting techniques to aid in analyzing and understanding more complex topologies. Finally, high step-up DC-DC converters based on magnetic coupling and switched capacitor widely cited by important works related to PV applications are presented, with their principles of operation analysed in a simple and objective way, but sufficient to understand their capability to provide high voltage gain. The approach presented by this paper leads to insight into how to place the energy storage elements to create new topologies of DC-DC converters, so that high voltage gain is achieved, and how to analise the high voltage gain capability of complex topologies

The adoption of electric vehicles (EVs) has shown exponential growth in recent years, with expectations for further development in the years to come. With such significant expansion, efforts and incentives are shifting from EV sales to projects aimed at expanding charging station infrastructure. In order to sustain this growing trend, a reliable and robust charging infrastructure is needed. However, the entire process of planning, designing, and constructing fixed charging stations (FCSs) is time-consuming and expensive. In this scenario, mobile charging stations (MCSs) offer a complementary solution to ensure the necessary reliability for the improvement of EV owners’ experiences in the electrified transportation sector, as they help reduce range anxiety, peak-hour costs, and waiting times. In this sense, this paper aims to disseminate the state-of-the-art research and studies on MCSs, covering topics such as architectures, standards, converter topologies, and market solutions.

This paper introduces a single-switch, high step-up DC–DC converter for photovoltaic applications such as power optimizers and microinverters. The proposed converter employs two voltage multipliers cells with switched capacitor and magnetic coupling techniques to achieve high voltage gain. This feature, along with a passive clamp circuit, reduces the voltage stress across the switch, allowing for the employment of low $R_{{DS}_{on}}$ MOSFET. This leads to low conduction loss of the switch. The diodes operate with zero-current switching at their turn-off transition, eliminating the reverse recovery losses. Additionally, the switch turns on with zero-current switching, leading to insignificant switching loss associated with its turn-on transition. The operation principle and steady-state analysis are presented and validated through experimental results obtained from a 140 W prototype of the proposed converter.

This paper proposes a high step-up high-efficiency converter, comprised of an active switched coupled-inductor cell. The secondary windings are integrated into a rectifier voltage multiplier cell in a boost-flyback configuration, allowing the operation with high voltage gain with low switches duty cycle and low turn-ratios on the coupled-inductors. Both coupled-inductors are integrated into a single core due to the parallel operation of the switches. The leakage inductances of the coupled-inductors are used to mitigate the reverse recovery currents of the diodes, while regenerative clamp circuits are used to protect the switches from the voltage spikes caused by the leakage inductances. The operation of the converter is analyzed both quantitatively and qualitatively, and the achieved results are validated through experimentation of a 400 W prototype. A 97.1% CEC efficiency is also reported.

The symmetrical input-interleaved high-gain DC-DC converters are suitable candidates to be used as the first stage in PV microinverters and as parallel-connected power optimizers. In both applications, they are responsible for boosting the PV module DC voltage to a higher value and executing the maximum power point tracking control. However, such converters have many state variables, some of them discontinuous, and many operation stages, which make the development of the small-signal model a challenging task. Therefore, the aim of this paper is to propose a reduced-order improved average method (ROIAM) to model the family member of converters that present characteristics such as symmetry, interleaved operation, and discontinuous state-space variables. ROIAM is applied to model for the first time in the literature the symmetrically-interleaved coupled inductor-based boost (SICIBB), leading to a fourth-order mathematical model (reduced-order model). The complete eighth-order mathematical model is developed as well to prove that the reduced-order model represents correctly the dynamic behavior of the SICIBB converter by employing only four state variables, reducing considerably the effort of the modeling. Based on the reduced-order proposed model, a closed-loop control is designed and tested in a 300-W prototype of the SICIBB converter.