Since technology progresses, the need to optimize the thermal system’s heat transfer efficiency is continuously confronted by researchers. A primary constraint in the production of heat transfer fluids needed for ultra-high performance was its intrinsic poor heat transfer properties. MXene, a novel 2D nanoparticle possessing fascinating properties has emerged recently as a potential heat dissipative solute in nanofluids. In this research, 2D MXenes (Ti3C2) are synthesized via chemical etching and blended with a binary solution containing Diethylene Glycol (DEG) and ionic liquid (IL) to formulate stable nanofluids at concentrations of 0.1, 0.2, 0.3 and 0.4 wt%. Furthermore, the effect of different temperatures on the studied liquid’s thermophysical characteristics such as thermal conductivity, density, viscosity, specific heat capacity, thermal stability and the rheological property was experimentally conducted. A computational analysis was performed to evaluate the impact of ionic liquid-based 2D MXene nanofluid (Ti3C2/DEG+IL) in hybrid photovoltaic/thermal (PV/T) systems. A 3D numerical model is developed to evaluate the thermal efficiency, electrical efficiency, heat transfer coefficient, pumping power and temperature distribution. The simulations proved that the studied working fluid in the PV/T system results in an enhancement of thermal efficiency, electrical efficiency and heat transfer coefficient by 78.5%, 18.7% and 6%, respectively.
The addition of ionic liquids with MXene nanofluid has a substantial impact on the solar thermal collectors’ working fluid’s optical properties that effectively absorb and distribute solar radiation. Increased solar radiation absorption potential ensures that heats are transported more rapidly and effectively. This research endeavors to investigate the concept of accumulating solar energy via the usage of ionic liquid-based 2D MXene nanofluid (Ionanofluids) for solar applications. In this study, the optical potential of Diethylene Glycol/MXene nanofluid incorporated with 1-ethyl-3-methyl imidazolium octyl sulfate ([Emim][OSO4]) ionic liquid was extensively investigated with respect to MXene concentration (0.1 to 0.4 wt%) and time (first day and seventh day) through UV-Vis Spectroscopy. A two-step approach was employed to synthesize the proposed ionanofluids with nanoparticle concentrations from 0.1 to 0.4 wt%. In wavelengths between 240 to 790 nm, the effect of ionic liquids, MXene concentration, and dispersion stability played a significant part in enhancing the absorbance capacity of the formulated MXene based Ionanofluid. Furthermore, the increase in the concentration of MXene nanoparticles resulted in more absorbance peaks facilitating high light absorption. Finally, the electrical conductivity of the ionanofluids is also analyzed as MXene renders them promising for solar cell applications. The utmost electrical conductivity of the formulated fluids of 571 μS/cm (micro siemens per centimeter) was achieved at 0.4 wt% concentration.
Multi-walled carbon nanotubes (MWCNTs) are a contemporary class of nanoparticles that have a prominent thermal, electrical and mechanical properties. There have been numerous studies on the enhancement of thermophysical properties of nanofluids. However, there is only limited research on thermal and stability analysis of MWCNT nanofluids with various kinds of solvents or base fluids, namely propylene glycol, ethanol, ethylene glycol, polyethylene glycol, methanol and water. This paper reports the enhancement of thermophysical properties and stability of MWCNTs with six different base fluids in the presence of sodium dodecyl benzene sulfonate surfactant with a mass concentration of 0.5 wt%. Thermal and dispersion stabilities were determined using a thermogravimetric analyzer (TGA) and Zeta potential, along with a visual inspection method to evaluate the agglomeration or sedimentation of MWCNT nanoparticles over a period of one month. Ultraviolet–visible spectroscopy and Fourier transform infrared spectroscopy were utilized to identify the molecular components and light absorption of the formulated nanofluids at their maximum wavenumber (4500 cm −1 ) and wavelength (800 nm). In addition, thermophysical properties such as thermal conductivity, specific heat capacity, viscosity and density with a peak temperature of 200 °C were also experimentally evaluated. The TGA results illustrated that MWCNT/ethylene glycol nanofluid achieved maximum thermal stability at 140 °C and it revealed a maximum zeta potential value of −61.8 mV. Thus, ethylene glycol solution was found to be the best base liquid to homogenize with MWCNTs for acquiring an enhanced thermophysical property and a long-term stability.