Reducing the total emissions of energy generation systems is a pragmatic approach for limiting the environmental pollution and associated climate change problems. Socio economic activities in the 21st century is highly determined by the energy generation mediums, particularly the renewable resources, across the world. Therefore, a thorough investigation into the technologies used in harnessing these energy generation mediums should contribute to their further advancement. Concentrated Solar Photovoltaics (CSP) and Enhanced Geothermal Energy (EGE) are considered as emerging renewable energy technologies with high potential to be used as suitable replacements for fossil products (petroleum, coal, natural gas etc.). Despite the accelerated developments in these technologies, they are still facing many challenges in terms of cost. This review paper presents a detailed background about these renewable energy technologies and their main types such as solar tower, parabolic trough, and so on. Also, the principle challenges impeding the advancement of these energy technologies into commercialisation are discussed. Possible solutions for the main challenges are presented and the future prospects for such energy generation mediums are reported.

Environmental concerns of greenhouse gases (GHG) effect from fossil commodities and the fast increase in global energy demand have created awareness on the need to replace fossil fuels with other sources of clean energy. PEM fuel cell (PEMFC) is a promising source of energy to replace fossil fuels. The commercialization of the cell depends on its price, weight and mechanical strength. Bipolar plates are among the main components of PEMFC which perform some significant functions in the fuel cell stack. Metal bipolar plate is considered by the research community as the future material for fuel cells. However, surface coating is required for metals to enhance its corrosion resistance, hydrophilicity and interfacial contact resistance (ICR) in PEM fuel cells. Open pore cellular metal foam (OPCMF) materials have been used to replace the conventional flow field channel in recent times due to its low electrical resistance, high specific area and high porosity; however, it endures the same corrosion problem as the metallic bipolar plate. This investigation offers an overview on different types of bipolar plates and techniques in coating metallic bipolar platse and open pore metal foam as flow field channel materials to improve the corrosion resistance which will eventually increase the efficiency of the fuel cell appreciably.