Recently, nano-EOR has emerged as a new frontier for improved and enhanced oil recovery (IOR & EOR). Despite their benefits, the nanoparticles tend to agglomerate at reservoir conditions which cause their detachment from the oil/water interface, and are consequently retained rather than transported through a porous medium. Dielectric nanoparticles including ZnO have been proposed to be a good replacement for EOR due to their high melting point and thermal properties. But more importantly, these particles can be polarized under electromagnetic (EM) irradiation, which provides an innovative smart Nano-EOR process denoted as EM-Assisted Nano-EOR. In this study, parameters involved in the oil recovery mechanism under EM waves, such as reducing mobility ratio, lowering interfacial tensions (IFT) and altering wettability were investigated. Two-phase displacement experiments were performed in sandpacks under the water-wet condition at 95°C, with permeability in the range of 265–300 mD. A crude oil from Tapis oil field was employed; while ZnO nanofluids of two different particle sizes (55.7 and 117.1 nm) were prepared using 0.1 wt. % nanoparticles that dispersed into brine (3 wt. % NaCl) along with SDBS as a dispersant. In each flooding scheme, three injection sequential scenarios have been conducted: (i) brine flooding as a secondary process, (ii) surfactant/nano/EM-assisted nano flooding, and (iii) second brine flooding to flush nanoparticles. Compare with surfactant flooding (2% original oil in place/OOIP) as tertiary recovery, nano flooding almost reaches 8.5–10.2% of OOIP. On the other hand, EM-assisted nano flooding provides an incremental oil recovery of approximately 9–10.4% of OOIP. By evaluating the contact angle and interfacial tension, it was established that the degree of IFT reduction plays a governing role in the oil displacement mechanism via nano-EOR, compare to mobility ratio. These results reveal a promising way to employ water-based ZnO nanofluid for enhanced oil recovery purposes at a relatively high reservoir temperature.

Utilization of metal-oxide nanoparticles (NPs) in enhanced oil recovery (EOR) has generated substantial recent research interest in this area. Among these NPs, zinc oxide nanoparticles (ZnO-NPs) have demonstrated promising results in improving oil recovery due to their prominent thermal properties. These nanoparticles can also be polarized by electromagnetic (EM) field, which offers a unique Nano-EOR approach called EM-assisted Nano-EOR. However, the impact of NPs concentrations on oil recovery mechanism under EM field has not been well established. For this purpose, ZnO nanofluids (ZnO-NFs) of two different particle sizes (55.7 and 117.1 nm) were formed by dispersing NPs between 0.01 wt.% to 0.1 wt.% in a basefluid of sodium dodecylbenzenesulfonate (SDBS) and NaCl to study their effect on oil recovery mechanism under the electromagnetic field. This mechanism involved parameters, including mobility ratio, interfacial tension (IFT) and wettability. The displacement tests were conducted in water-wet sandpacks at 95˚C, by employing crude oil from Tapis. Three tertiary recovery scenarios have been performed, including (i) SDBS surfactant flooding as a reference, (ii) ZnO-NFs flooding, and (iii) EM-assisted ZnO-NFs flooding. Compare with incremental oil recovery from surfactant flooding (2.1% original oil in place/OOIP), nanofluid flooding reaches up to 10.2% of OOIP at optimal 0.1 wt.% ZnO (55.7 nm). Meanwhile, EM-assisted nanofluid flooding at 0.1 wt.% ZnO provides a maximum oil recovery of 10.39% and 13.08% of OOIP under EM frequency of 18.8 and 167 MHz, respectively. By assessing the IFT/contact angle and mobility ratio, the optimal NPs concentration to achieve a favorable ER effect and interfacial disturbance is determined, correlated to smaller hydrodynamic-sized nanoparticles that cause strong electrostatic repulsion between particles.

Worldwide, reservoirs are having serious challenges on crude oil removal due to various factors affecting its mobility; hence, the approach of oil production needs to be rectified. Recently, various nanoparticles (NPs) were discovered to have aided in oil displacement to improve oil production by modifying some reservoir conditions thereby reducing interfacial tension (IFT) and rock surface wettability. However, the injected NPs in the reservoir are trapped within the rock pores and become worthless due to high temperature and pressure. Hence, introducing energy to the nanofluids via electromagnetic (EM) waves can improve nanoparticle (NPs) mobility in the reservoir for the attainment of oil displacements. In this work, hybrid ZnO/SiO₂ NPs were selected by considering that the combination of two dielectric NPs may produce a single nanofluid that is expected to make the fluids more electrified under EM waves. The result showed that ZnO/SiO₂ NPs reduced the IFT (mN/m) from 17.39 to 2.91, and wettability (°) from 141 to 61. Moreover, by introducing the EM waves to the fluids, the IFT was further reduced to 0.02 mN/m from 16.70 mN/m, and solid surface wettability was also reduced from 132° to 58°. The advancement observed during exposure to EM waves was attributed to the energy propagated to the fluids that polarize the free charges of the NPs and consequently activate the fluids by creating disturbances at the fluid/oil interface, which resulted in reduced IFT and wettability.

Erosion caused by the repeated impact of particles on the surface of a substance is a common wear method resulting in the gradual and continual loss of affected objects. It is a crucial problem in several modern industries because the surfaces of various products and materials are frequently subjected to destructively erosive situations. Polymers and their hybrid materials are suitable, in powdered form, for use as coatings in several different applications. This review paper aims to provide extensive information on the erosion behaviors of thermoset and thermoplastic neat resin and their hybrid material composites. Specific attention is paid to the influence of the properties of selected materials and to impingement parameters such as the incident angle of the erodent, the impact velocity of the erodent, the nature of the erodent, and the erosion mechanism. The review further extends the information available about the erosion techniques and numerical simulation methods used for wear studies of surfaces. An investigation was carried out to allow researchers to explore the available selection of materials and methods in terms of the conditions and parameters necessary to meet current and future needs and challenges, in technologically advanced industries, relating to the protection of surfaces. During the review, which was conducted on the findings in the literature of the past fifty years, it was noted that the thermoplastic nature of composites is a key component in determining their anti-wear properties; moreover, composites with lower glass transition, higher ductility, and greater crystallinity provide better protection against erosion in advanced surface applications.

Due to the geographical location and technological limitation, various novel enhanced oil recovery (EOR) methods has been proposed to recover the remaining oil from a depleted oil reservoir. Research on application of nanoparticles either on its own or coupled with other stimulating agents has been growing enormously and some of them have shown a promising future. In high temperature and high pressure reservoirs, thermal degradation will cause failure to the conventional chemicals. In this work, temperature-stable YIG magnetic nanoparticles with an electromagnetic wave has been proposed as a new candidate for reservoir stimulating agent. The purpose of nanoparticle injection is to increase the sweep efficiency in the reservoir by increasing the viscosity of displacing fluid. In this research, Yttrium iron garnet (YIG) nanoparticles have been injected into a waterflooded oil saturated porous medium to recover the remaining oil in the presence of an electromagnetic wave. At the sintering temperature 1200°C, a mixture of hematite and YIG was obtained, suggesting a higher temperature for single phase YIG. From VSM analysis, the average magnetic saturation, coercivity and remanence are 18.17 emu/g, 21.73 Oe and 2.38 emu/g, respectively. 1.0 wt% of YIG nanofluid was prepared and subsequently injected into the pre-saturated porous medium in the presence of square electromagnetic wave of 13.6 MHz. As much as 43.64% of the remaining oil in place (ROIP) was recovered following the injection of 2 pore volume of YIG nanofluid.

A modified transmission-line method (TLM) for organic field-effect transistors (OFET) contact resistance extraction is proposed. It is shown that the standard TLM approach can provide even the apparent negative contact resistance due to assumption of linear channel-length-dependence of the channel resistance and constant threshold voltage. This can be corrected by the modified TLM, where effect of channel-length-dependent threshold voltage is included with taking into account the dielectric nature of the active layer of OFETs. Obtained results illustrate the need of the threshold voltage discussion for contact resistance evaluation and demonstrate modified TLM approach as more reliable extraction method.