Silicon is considered to have significant potential for anode materials in lithium–ion batteries (LIBs) with a theoretical specific capacity of 4200 mAh g−1. However, the development of commercial applications is impacted by the volume shift that happens in silicon when charging and discharging. In this paper, a yolk–shell–structured Si@void@C anode material has been developed to address this problem. The silicon nanoparticle yolk material is obtained by recycling kerf loss (KL) Si waste from the process of slicing silicon block casts into wafers in the photovoltaic industry; the carbon shell is prepared by a hydrothermal method with glucose, and the sacrificial interlayer is Al2O3. The produced material is employed in the production of anodes, exhibiting a reversible capacity of 836 mAh g−1 at 0.1 A g−1 after 100 cycles, accompanied by a Coulomb efficiency of 71.4%. This study demonstrates an economical way of transforming KL Si waste into materials with an enhanced value for LIBs.
Hydrothermal liquefaction (HTL) is an effective biomass thermochemical conversion technology that can convert organic waste into energy products. However, the HTL process is influenced by various complex factors such as operating conditions, feedstock properties, and reaction pathways. Machine learning (ML) methods can utilize existing HTL data to develop accurate models for predicting product yields and properties, which can be used to optimize HTL operation conditions. This paper presents a bibliometric review on ML applications in HTL from 2020 to 2024. CiteSpace, VOSviewer, and Bibexcel were used to analyze seven key bibliometric attributes: annual publication output, author co-authorship networks, country co-authorship networks, co-citation of references, co-citation of journals, collaborating institutions, and keyword co-occurrence networks, as well as time zone maps and timelines, to identify the development of ML in HTL research. Through the detailed analysis of co-occurring keywords, this study aims to identify frontiers, research gaps, and development trends in the field of ML-aided HTL.
Silicon represents one of the most attractive anode materials in lithium-ion batteries (LIBs) due to its highest theoretical specific capacity. Thus, there is a most urgent need to prepare Si-based nano materials in a very efficient way and develop some reasonable approaches for their modification in order to resolve the short-falls of Si anodes, which include both low conductivity and huge volume changes during intercalation of lithium ions. In this work, the kerf loss silicon (KL Si) from the photovoltaic industry has been used as an inexpensive Si source for the preparation of a porous silicon/silver/carbon composite (pSi/Ag@C) as an anode material. Porous silicon was embedded with Ag particles via the Ag-catalyzed chemical etching process, providing additional space to accommodate the large volume expansion of silicon. After carbon coating from polymerization of tannic acid on the surface of pSi/Ag, a high-speed conductive network over the surface of silicon was built and contributed to enhancing the electrochemical performance of the anode. The pSi/Ag@C electrode discharge capacity maintained at a stable value of 665.3 mAh g−1 after 100 cycles under 0.5 A g−1 and exhibited good rate performance. Therefore, this study recommends that the method is very promising for producing a silicon anode material for LIBs from KL Si.