Abundant biomass is a potential energy source. However, it possesses several challenges when considered for energy applications. Torrefaction, a thermal pretreatment process can improve the properties of biomass as energy source. This study focused on comparing effect of torrefaction operating parameters on agricultural and wood wastes properties as fuel. The physiochemical properties, composition, moisture-biomass interaction and ash melting behavior were determined. The result show that higher torrefaction temperature and longer residence time increased lignin content, reduced hemicellulose and cellulose content. The moisture uptake of torrefied biomass was reduced in the range 2.47–9.94% compared with raw biomass depending on torrefaction temperature that indicate torrefied biomass was more hydrophobic than raw biomass. The moisture adsorption isotherm curve shows type II isotherm based on the Brunauer-Emmett-Teller’s (BET) classification and was best described by the Oswin model. In addition, torrefaction treatment showed significant influence on the melting behavior of the biomass ash. Especially for agricultural wastes, the fouling tendency shifted from serious range to low range with torrefaction treatment. Torrefaction showed promise for improving fuel characteristics of the studied biomass.

Industrial symbiosis, which allows the sharing of resources between different industries, could help to improve the overall feasibility of bio-based chemicals production. In that regard, this study focused on integrating the torrefaction of pulp industry sludge with anaerobic digestion. More specifically, anaerobic digestion (AD) of pulp sludge-derived torrefaction condensate (TC) was studied to evaluate the biomethane and volatile fatty acid (VFA) potential. The torrefaction condensate produced at 275 and 300 °C was used in AD. The volatile solid content (VS) was 6.69 and 9.01% for the condensate produced at 275 and 300 °C, respectively. The organic fraction of TC mainly contained acetic acid, 2-furanmethanol, and syringol. The methane yield was in the range of 481–772 mL/g VS for the mesophilic and 401–746 mL/g VS for the thermophilic process, respectively. The VFA yield was in the range of 1.1 to 3.4 g/g VS for mesophilic and from 1.5 to 4.7 g/g VS in thermophilic conditions, when methanogenesis was inhibited. Finally, pulp sludge TC is a feasible feedstock to produce platform chemicals like VFA. However, at higher substrate loading, signs of process inhibition were observed because of the relatively increasing concentration of microbial inhibitors