In a previous work it has been demonstrated that micro-Raman spectroscopy is a technique able to recognize crystalline phases on untreated samples. In that case, inorganic particles and uncoated fibers from bronchoalveolar lavage (BAL) of a patient affected by pneumoconiosis were identified and characterized. In this work the technique is applied to asbestos bodies, that is, to coated fibers, and on crystallizations and fibrous phases observed in the plural plaque from patients affected by mesothelioma. From the Raman analysis the abundant fibrous material observed in the pleural area is talc, whereas rounded grains in the pleural tissue show the Raman spectrum of apatite, a calcium phosphate mineral particular to bones. In the pulmonary tissue many asbestos bodies, consisting of the incorporated fibers coated by iron-rich proteins, were observed. Under the 632.8 nm laser beam of the spectrometer, photo-crystallization of hematite in the iron-rich material forming the asbestos bodies can be proposed by the changes in the Raman spectra acquired during subsequent acquisitions. Nevertheless, the identification of the mineral phase constituting the incorporated fiber was possible by analyzing the Raman spectra; the results were confirmed by variable pressure scanning electron microscopy with annexed energy dispersive spectroscopy (VP-SEM-EDS) analyses.

Attenuated Total Reflection (ATR) spectroscopy coupled with a microscope allows for the analysis of specimens without any preparation, spatially correlated with the morphology of the specimen. These characteristics make micro-ATR systems very useful for studying gemstones and in particular amber samples. Indeed, in this report, the micro-ATR technique was used to characterize three Burmite samples, as case studies. Particularly, focusing the ATR crystal spot on the amber surface where a difference in the Ultraviolet (UV) reaction was previously detected, thereby relative differences in the IR spectrum could be analyzed. Here we present a methodology combining the UV imaging technique with the micro-Attenuated total reflection Fourier transform infrared spectroscopy (micro-ATR/FT-IR) analyses, in order to correlate the fluorescence information with the molecular vibrational modes of amber and their relative spatial distribution. Finally, this work is intended as an initial methodology study and part of the amber characterization project, focused on characterizing the Burmese amber collection of the Peretti Museum Foundation from several disciplines (i.e., palaeoentomology, vibrational spectroscopy, neutron tomography, etc.).

Some cultured and natural pearls can be reliably distinguished by visual inspection and by the use of lens and microscope. However, assessing the origin of the pearls could be not straightforward since many different production techniques can now be found in the pearl market, for example in salt or freshwater environments, with or without a rigid nucleus. This wide range of products requires the use of new effective scientific techniques. Indeed, X-ray radiography has been used by gemologists since last century as the only safe and non-destructive way to visually inspect the interior of a pearl, and recently, also X-ray computed micro-tomography was used to better visualize the inner parts of the gems. In this study we analyzed samples of natural and cultured pearls by means of two non-destructive techniques: the X-ray Phase-Contrast Imaging (PCI) and the Neutron Imaging (NI). PCI and NI results will be combined for the first time, to better visualize the pearls internal morphology, thus giving relevant indications on the pearl formation process.