Flow over a step cylinder at ReD = 2000 and D/d = 2 was investigated using a URANS-based numerical approach. The results illustrate the downstream development and interaction of wake vortices and identify streamwise vortical structures originating at the step. The observed flow development is shown to be in agreement with experimental results. Also, a comparison of the computational results and previous experimental findings is carried out for the drag coefficient and the pressure coefficient.

An analytical model is proposed to evaluate the performance of a Direct Expansion Solar-Assisted Heat Pump under a given environmental condition. These thermal machines commonly employ uncovered flat plate solar collectors, and given this, the convection phenomenon is taken into account as well as the effect of the diffuse and reflected solar radiation in addition to the normal beam radiation absorbed by the tilted surface of the collectors. The heat pump cycle is modelled through a first law of thermodynamics approach in order to compute the heat yielded through condensation and the minimum heat required by the volume of water in the thermal storage unit. Consequently, the thermal capacity of the heat pump, the ratio at which the system yields heat to a given load of water, is calculated and discussed. The results of the model proposed are compared with the experimental data provided by three research papers with experiments conducted in different geographic coordinates and test rigs operating during diverse atmospheric conditions. A maximum relative error of 20% was obtained and furthermore, a statistical analysis of the data was conducted having found that there is no significant statistical difference between the analytical and experimental data samples within the 95% confidence interval. Finally, based on the thermal capacity, the performance of the heat pump is evaluated and a multi-objective optimization technique is implemented to obtain the best possible combination of factors to further enhance the performance of the heat pump.

This work deals with the problem of choosing a controller for the production of biodiesel from the transesterification process through temperature control of the chemical reactor, from the point of view of automatic control, by considering such aspects as the performance metrics based on the error and the energy used by the controller, as well as the evaluation of the control system before disturbances. In addition, an improvement method is proposed via a neuro-fuzzy controller tuned with a metaheuristic algorithm to increase the efficiency of the chemical reaction in the reactor. A clear improvement is shown in the minimization of the integral of time multiplied squared error criterion (ITAE) performance index with respect to the proposed method (8.1657 $\times {10}^4$) in relation to the PID controller (7.8770 $\times {10}^7$). Moreover, the integral of the total control variation (TVU) performance index is also shown to evaluate the power used by the neuro-fuzzy controller (25.7697), while the PID controller obtains an index of (32.0287); this metric is especially relevant because it is related to the functional requirements of the system since it quantifies the variations of the control signal.