In this work we present advances in three dimensional (3D) neuronal cell culture systems based on a reversible assembly of a microbioreactor with a microelectrode array (MEA) to create a MEMS-based 3D cell culture system for in vitro neuro-electrophysiological recordings. A batch of six molds were milled in poly (methyl methacrylate). The molds were used for soft lithography of polydimethylsiloxane (PDMS). In the center of the PDMS shape, a porous polyethersulfone (PES) cylindrical tube was press-fitted to form a growth barrier between the culture chamber inside the PES tube and the microfluidic channel surrounding the PES tube. A thin layer of partially cured PDMS was used to seal the bottom of the microbioreactor and provide reversible adhesion with the glass surface of a MEA. SH-SY5Y cells were successfully differentiated inside the microbioreactors in Matrigel and demonstrated extended neuronal networks over a height of at least 184 micrometers within the system. In previous microbioreactor designs visibility was limited due to the closed top with the dispensing holes. The new open top design allows for a better evaluation of the cell culture by optical detection methods during the experiment. Electrophysiological activity was recorded within the microbioreactor using human induced pluripotent stem cell-derived cortical neurons cultured in Matrigel, in 3D, up until 21 days in vitro. In summary, we present advances made in the design, the fabrication process and integration of microbioreactors with MEAs. Optical imaging capabilities improved significantly with an open top and the culture time was further extended from 7 to 21 DIV without leakage or degradation thanks to introducing PES as a barrier material and an enhanced assembly procedure. The latter facilitated a sufficient long-term culture for neurons to mature in an environment free from flow-induced stress and provided a proof of principle for the recording of electrophysiological activity of cortical neurons cultured in 3D.
In order to better understand the brain and brain diseases, in vitro human brain models need to include not only a chemically and physically relevant microenvironment, but also structural network complexity. This complexity reflects the hierarchical architecture in brain tissue. Here, a method has been developed that adds complexity to a 3D cell culture by means of nanogrooved substrates. SH-SY5Y cells were grown on these nanogrooved substrates and covered with Matrigel, a hydrogel. To quantitatively analyze network behavior in 2D neuronal cell cultures, we previously developed an automated image-based screening method. We first investigated if this method was applicable to 3D primary rat brain cortical (CTX) cell cultures. Since the method was successfully applied to these pilot data, a proof of principle in a reductionist human brain cell model was attempted, using the SH-SY5Y cell line. The results showed that these cells also create an aligned network in the 3D microenvironment by maintaining a certain degree of guidance by the nanogrooved topography in the z-direction. These results indicate that nanogrooves enhance the structural complexity of 3D neuronal cell cultures for both CTX and human SH-SY5Y cultures, providing a basis for further development of an easy access brain-on-chip model.
6 November 2018 in Frontiers in Cellular Neuroscience
Research on neuronal differentiation and neuronal network guidance induced through nanotopographical cues generates large datasets, and therefore the analysis of such data can be aided by automatable, unbiased image screening tools. To link such tools, we present an image-based screening method to evaluate the influence of nanogroove pattern dimensions on neuronal differentiation. This new method consists of combining neuronal feature detection software, here HCA-Vision, and a Frangi vesselness algorithm to calculate neurite alignment values and quantify morphological aspects of neurons, which are measured via neurite length, neuronal polarity, and neurite branching, for differentiated SH-SY5Y cells cultured on nanogrooved polydimethylsiloxane (PDMS) patterns in the 200–2000 nm range. The applicability of this method is confirmed by our results, which find that the level of alignment is dependent on nanogroove dimensions. Furthermore, the screening method reveals that differentiation and alignment are correlated. In particular, patterns with groove widths >200 nm and with a low ridge width to pattern period ratio have a quantifiable influence on alignment, neurite length, and polarity. In summary, the novel combination of software that forms a base for this statistical analysis method demonstrates good potential for evaluating tissue microarchitecture, which depends on subtle design variation in substrate topography. Using the screening method, we obtained automated and sensitive quantified readouts from large datasets.
1 October 2019 in Journal of Vacuum Science & Technology B
A new generation of in vitro human brain models is vital to surpass the limitations of current cell culture platforms and animal cell lines in studying brain function and diseases. Brain-on-chip technology can generate well-defined and reproducible platforms to control the cellular microenvironment for in vivo-like, organized brain cell cultures. Previously, the authors investigated differentiation and network organization of the neuroblastoma SH-SY5Y cell line on nanogrooved substrates, showing that nanogroove guidance of neuronal outgrowths is dependent on nanogroove dimensions. Further, increased orientation of neurites was positively correlated to the differentiation of SH-SY5Y cells. However, as mimicking brain structure alone is insufficient, here, the function of the neuronal cell network as dependent on surface topography and material stiffness is investigated. A generalized replication protocol was developed to create similar nanogrooved patterns in cell culture substrates from different materials, specifically polydimethylsiloxane (PDMS) and Ostemer. Experiments using calcium imaging, where calcium fluxes across membranes are visualized as an indication of action potentials in neuronal cells, were performed with differentiated SH-SY5Y cells and human induced pluripotent stem cell-derived neuronal cells (hiPSCNs) on flat versus nanogrooved substrates to study the network function. Calcium live-imaging was performed and results for experiments with SH-SY5Y cells and hiPSCNs showed that nanogrooved PDMS substrates trended toward increased cellular activity and neuronal cell network connectivity. For future investigation of compatible substrate materials in combination with the effect of material stiffness on the cells, nanogrooved Ostemer substrates were demonstrated to faithfully replicate for use in neuronal cell cultures using nanogrooved substrates. First experiments into the neuronal cell function using stem cells described here aid toward elucidating the effect of nanotopographical and mechanical properties and their benefits toward advancing in vitro neuronal cell models both in form and function. Overall, the results indicate, in conjunction with the previous findings on neuronal outgrowth guidance, that anisotropy as introduced by nanogrooved substrates can have a controllable and potentially beneficial influence on neuronal cell cultures.
23 October 2018 in Journal of Vacuum Science & Technology B
In this work, nanogroove dimensions as a design input parameter for neuronal differentiation and neurite outgrowth in brain-on-a-chip (BOC) applications are investigated. Soft lithography in polydimethylsiloxane (PDMS) is used extensively in organ-on-a-chip applications to create environments for in vitro models. As such, here it is used to fabricate cell culture substrates with nanogrooved patterns. Using a newly developed analysis method, the effect of the nanogrooved, biomimetic PDMS substrates is compared with lateral and height variations within the nanometer range as measured by means of atomic force microscopy (AFM). PDMS culture substrates were replicated from a cyclic olefin copolymer template, which was fabricated either directly by thermal nanoimprinting from a jet and flash imprint lithography (J-FIL) resist pattern (process I) on a polished silicon wafer or via an intermediate reactive ion etched all-silicon mold (process II) that was fabricated by using the J-FIL resist pattern as in process I as a mask. To study the interplay between the lateral and height dimensions of nanogrooves on the differentiation process of SH-SY5Y cells, which are a well-established model for neuronal cells that form networks in culture, the authors first characterized the feature sizes of the PDMS substrates received from both processes by AFM. On average, nanogrooved patterns from process I had a 1.8 ± 1.1% decrease in pattern period, a 15.5 ± 12.2% increase in ridge width compared to the designed dimensions, and a height of 95.3 ± 10.6 nm. Nanogrooved patterns for process II had a 1.7 ± 1.7% decrease in pattern period, a 43.1 ± 33.2% increase in ridge width, and a height of 118.8 ± 13.6 nm. Subsequently, they demonstrated that neurite outgrowth alignment was particularly strong if the pattern period was 600 nm or 1000 nm with the additional constraint for these patterns that the ridge width is <0.4 times the pattern period. Increasing pattern height increased the fraction of differentiated cells within the cell culture and increased neurite length, but had no direct impact on outgrowth alignment. This study forms the basis for optimization in the bottom-up engineering of neuronal network architecture, for which specific patterns can be selected to assist in neuronal cell differentiation and direct neurite growth and alignment. Such organized neuronal networks can aid in the design of in vitro assay systems for BOC applications by improving biological response readouts and providing a better understanding of the relationship between form and function of a neuronal network.
13 October 2021 in Journal of Vacuum Science & Technology B
This study presents sensing of network bursts in a three-dimensional (3D) cell culture system consisting of a microbioreactor and a multielectrode array (MEA), i.e., brain-on-chip, to interpret neural network dynamics in a label-free manner. While our initial results reported an increased single spiking activity already over the course of days 7, 14, and 21 in vitro, the advanced long-term analysis of the data set (including a last timepoint at day 79) here demonstrates a proof-of-principle for following bursting patterns upon maturation of the network in the microbioreactor as an add-on device for a commercial MEA recording system. These quantitative electrophysiological findings, including mean bursting rate, mean burst duration, and network burst dynamics, confirm a 2D to 3D transition in coherence with the literature.