In top blowing steelmaking, the impact behavior of the supersonic oxygen jet significantly affects the emulsification of slag–metal and the reaction rate in the molten bath. To enhance the mass transfer rate, a swirl-type oxygen lance is proposed. The mass transfer processes between slag and molten steel in the converter during the swirl-type oxygen lance blowing process are investigated. A mixing index Im is proposed to assess the slag–metal mixing degree, and the effects of operating parameters on mass transfer rate and mixing index are discussed. The results demonstrate that compared to the traditional oxygen lance, the swirl-type oxygen lance enhances the stirring intensity of the jet on the molten bath, resulting in a 5.1%–13.0% increase in the mass transfer rate. When the swirl-type oxygen lance is under the condition of H = 45de, the mixing index is the lowest (4.52) and the volumetric mass transfer coefficient is the highest (1.92 × 10−3 m3/s). The energy transferred from the jet to the molten bath can be enhanced by an increase in the flow rate or operation pressure, thereby decreasing the mixing index and increasing the volumetric mass transfer coefficient. Finally, a criterion number equation (Sh = 5.78 × 10−3Re0.43Sc0.33) for the involved mass transfer processes is established, which indicates that increasing the velocity of the slag and molten steel is more effective in enhancing the mass transfer rate than adjusting the liquid phase components in practical steelmaking.
The dynamic characteristics of supersonic double-parameter jets and their interaction with the molten pool were experimentally studied. The effects of jet inclination angles and gas flow ratios on gas intensity, coalescence characteristics, and dynamic parameter distributions were discussed. The characteristics of the cavity formed by the interaction of the jet and molten pool were revealed. The results show that the jet inclination angle has more influence on the jet coalescence compared with the gas flow rate. However, the gas flow ratio plays a decisive role in the velocity distribution along the jet centerline compared with the jet inclination angle. The velocity peaks of the double-parameter jets were obviously different at fixed axial distances. Compared with other variables, the small-nozzle inclination has a greater impact on the cavity diameter, while the large-nozzle flow ratio has a greater impact on the cavity depth. The depth and width of the cavity formed by the double-parameter jets are more advantageous than that formed by the single-parameter jets. Furthermore, the double-parameter jets were applied to the actual smelting of a 260t converter.
Compared to alternative descaling methods, the high-pressure water descaling technology offers cheaper costs and higher descaling rate, which has obvious advantages. As a key component, the descaling nozzle will have a direct impact on the descaling effect. Based on the detailed study of the traditional U-shaped and V-shaped grooving methods, this paper discovered a conical curve grooving method where the grooving curve shape factor lies between those of the two aforementioned methods, and established a full-scale model of the descaling nozzle. For the conical groove nozzle, numerical Computational Fluid Dynamics (CFD) simulations were performed using the shape factor of the groove curve between 0 and 1 and the throat diameter between 2.1 and 2.4 mm. It has been determined that a descaling nozzle with the shape factor between 0.75 and 0.9 has superior dynamic performance, and that when the throat diameter is between 2.3 and 2.4 mm, the nozzle has a higher outlet average velocity and a reasonable outlet flow rate. In conclusion, the dimensionless functional relationship between taper shape factor, throat diameter, nozzle outlet average velocity, effective descaling width and area is established in order to provide certain theoretical support for various production requirements of nozzles.
25 August 2025 in Metallurgical Research & Technology
During the steelmaking process, the oxygen lance nozzle undergoes progressive wear with increasing blowing cycles, leading to deviations from its designed operational parameters and consequent degradation in blowing efficiency. This study presents a comprehensive investigation into the jet characteristics of a 5-hole oxygen lance nozzle employed in a 120-ton converter, with particular emphasis on analyzing the nozzle’s wear progression throughout its service life. Through systematic examination of the dynamic behavior and energy evolution of nozzle jets at varying wear stages, this research provides critical insights for optimizing industrial smelting operations. The experimental results demonstrate that nozzle wear significantly influences jet characteristics. As wear progresses, the nozzle exhibits an increased propensity for generating intense shock waves and expansion waves. Furthermore, the study reveals a direct correlation between the degree of nozzle wear and two key parameters: exit velocity and kinetic energy loss rate, both of which show marked increases. However, within the initial 120 heat cycles, the centerline velocity at a standardized measurement point 600 mm from the nozzle exit, along with the jet’s kinetic energy loss rate, remains relatively stable, showing minimal variation. Beyond this threshold, at a distance of 600 mm from the nozzle outlet, the centerline velocity of the stabilized jet experiences a measurable decrease, ranging from 2.08% to 5.29% compared to the performance of an unworn nozzle. These findings provide quantitative evidence of the relationship between nozzle wear and jet performance characteristics, offering valuable data for optimizing nozzle replacement schedules and maintaining operational efficiency in converter steelmaking processes.