The power prediction error of uncertain renewable energy sources (URESs) affects the power balance of a power grid. In the power systems with high proportion renewable power sources (PSHPRPSs), automatic generation control (AGC) cannot accommodate the day-ahead power prediction error. The dispatching control system (DCS) of PSHPRPSs adds real-time dispatching links to modify the day-ahead dispatching plan so that the grid power error is within the range of AGC accommodation. This paper proposes a critical time scale (CTS) selection algorithm based on time aggregation characteristics for real-time dispatching of PSHPRPSs and calculates the annual CTS of real-time dispatching of power grids. The uncertainty function is used to describe the relationship between the prediction error of the URESs and the prediction lead time. The total uncertainty function is calculated based on the time aggregation characteristics and is used to select the annual CTS of real-time dispatching. The proposed algorithm quantitatively describes the relationship between the CTS and the operation proportion of URESs and also AGC accommodation capacity. The calculated annual CTS not only ensures the power balance of the power grid, but also avoids the daily change of the CTS. Using the data of URESs in the Irish power grid, the feasibility of the proposed method was verified. The research results of this paper are helpful to accommodate the day-ahead power prediction error of URESs and maintain the safe operation of power grid.
With the increasing proportion of uncertain power sources in the power grid; such as wind and solar power sources; the probabilistic optimal power flow (POPF) is more suitable for the steady state analysis (SSA) of power systems with high proportions of renewable power sources (PSHPRPSs). Moreover; PSHPRPSs have large uncertain power generation prediction error in day-ahead dispatching; which is accommodated by real-time dispatching and automatic generation control (AGC). In summary; this paper proposes a once-iterative probabilistic optimal power flow (OIPOPF) method for the SSA of day-ahead dispatching in PSHPRPSs. To verify the feasibility of the OIPOPF model and its solution algorithm; the OIPOPF was applied to a modified Institute of Electrical and Electronic Engineers (IEEE) 39-bus test system and modified IEEE 300-bus test system. Based on a comparison between the simulation results of the OIPOPF and AC power flow models; the OIPOPF model was found to ensure the accuracy of the power flow results and simplify the power flow model. The OIPOPF was solved using the point estimate method based on Gram–Charlier expansion; and the numerical characteristics of the line power were obtained. Compared with the simulation results of the Monte Carlo method; the point estimation method based on Gram–Charlier expansion can accurately solve the proposed OIPOPF model
In power systems with a high proportion of renewable power sources (PSHPRPSs), the power constraints of the tie-line may limit the ability of the reserve power to accommodate uncertain power generation, resulting in difficulties for the grid power balance. As uncertain power generation cannot be predicted accurately and in accordance with the law of probability and statistics, it is necessary to use a probability model to calculate the uncertain power of the tie-line. Here, day-ahead prediction error probability optimal power flow (DPEPOPF) is proposed to calculate the tie-line reserve power probability margin (TRPPM) in day-ahead dispatching. In day-ahead dispatching, TRPPM is reserved for real-time dispatching to accommodate uncertain power generation, so as to avoid tie-line power congestion. This study classifies the area of the grid based on the principle of area control error accommodation, and the DPEPOPF is divided into two categories: An inter-area day-ahead prediction error probability optimal power flow mathematical model, and an intra-area day-ahead prediction error probability optimal power flow mathematical model. The point estimate optimization algorithm was implemented in MATLAB 8.3.0.532 (R2014a) to calculate the TRPPM. The simulation results verify the accuracy of the model and effectively avoid power congestion of the tie-line.