The InAs/InAsSb (Gallium-free) type-II strained-layer superlattice (T2SLS) has emerged in the last decade as a viable infrared detector material with a continuously adjustable band gap capable of accommodating detector cutoff wavelengths ranging from 4 to 15 µm and beyond. When coupled with the unipolar barrier infrared detector architecture, the InAs/InAsSb T2SLS mid-wavelength infrared (MWIR) focal plane array (FPA) has demonstrated a significantly higher operating temperature than InSb FPA, a major incumbent technology. In this brief review paper, we describe the emergence of the InAs/InAsSb T2SLS infrared photodetector technology, point out its advantages and disadvantages, and survey its recent development.
We demonstrated high-performance 8.9 μm cutoff wavelength nBn InAs/InAsSb type-II strained-layer superlattice (T2SL). These detectors exhibit a long minority carrier (hole) lifetime of 1.2 μs at 80 K, high quantum efficiency of 40% for back-side illuminated devices without antireflection coating, and low dark current density of 4.6 × 10−6 A/cm2 at 80 K. We measured absorption, minority carrier (hole) lifetime, quantum efficiency, and spectral response as a function of the temperature and applied bias. We investigated the temperature dependence of the hole diffusion length and mobility and found that their values increase with temperature from 1.3 μm and 6.5 cm2/Vs at 30 K to 6.5 μm and 36 cm2/Vs at T = 90 K. We compared the measured diffusion length and mobility of holes in long-wavelength infrared (LWIR) T2SL with these parameters of a high-performance mid-wavelength infrared (MWIR) T2SL. Unexpectedly, hole mobility in LWIR T2SL was found to be higher than in MWIR that is contrary to the theoretical predictions.
We demonstrate a modular design approach for large metasurface-based optical concentrators. In this approach, each concentrator is split into a collection of sublens modules. Each sublens module has an off-axis focal point, and this point is located between the concentrator center and the intended detector center. This reduces the necessary deflection angle, thus improving the concentrator design. Moreover, each concentrator module is designed individually, thereby reducing the required computational resources and improving the design versatility. We designed, fabricated, and tested 300-μm-diameter metasurface-based optical concentrators operating in the 3–5 μm mid-wavelength infrared range. These optical concentrators are fabricated on a gallium antimonide substrate, which can be used for epitaxial growth of infrared detectors. This allows future monolithic integration of these concentrators with detectors epitaxially grown on the front side of the substrate and concentrators fabricated on the backside. The optical concentrators enhanced the measured optical intensity at the intended detector position up to a factor of 6.4; in the future, this will improve the signal-to-noise ratio of detectors and increase their operating temperature.
We describe the challenges for long- and very long-wavelength InAs/InAsSb type-II strained-layer superlattice infrared detectors, and provide an overview of progress in device architecture development for addressing them. Specifically, we have explored the complementary barrier infrared detector (CBIRD) that contains p-type InAs/InAsSb T2SLS absorbers for enhancing quantum efficiency, while also suppressing surface shunt current. We describe selected device results, and also provide references to additional results and more in-depth discussions.