We describe a long wavelength infrared detector where an InAs/GaSb superlattice absorber is surrounded by a pair of electron-blocking and hole-blocking unipolar barriers. A 9.9 μm cutoff device without antireflection coating based on this complementary barrier infrared detector design exhibits a responsivity of 1.5 A/W and a dark current density of 0.99×10−5 A/cm2 at 77 K under 0.2 V bias. The detector reaches 300 K background limited infrared photodetection (BLIP) operation at 87 K, with a black-body BLIP D∗ value of 1.1×1011 cm Hz1/2/W for f/2 optics under 0.2 V bias.
We analyze and compare different aspects of InAs/InAsSb and InAs/GaSb type-II superlattices for infrared detector applications and argue that the former is the most effective when implemented for mid-wavelength infrared detectors. We then report results on an InAs/InAsSb superlattice based mid-wavelength high operating temperature barrier infrared detector. At 150 K, the 50% cutoff wavelength is 5.37 μm, the quantum efficiency at 4.5 μm is ∼52% without anti-reflection coating, the dark current density under −0.2 V bias is 4.5 × 10−5 A/cm2, and the dark-current-limited and the f/2 black-body (300 K background in 3–5 μm band) specific detectivities are 4.6 × 1011 and 3.0 × 1011 cm-Hz1/2/W, respectively. A focal plane array made from the same material exhibits a mean noise equivalent differential temperature of 18.7 mK at 160 K operating temperature with an f/2 optics and a 300 K background, demonstrating significantly higher operating temperature than InSb.
The InAs/InAsSb (Gallium-free) type-II strained-layer superlattice (T2SLS) has emerged in the last decade as a viable infrared detector material with a continuously adjustable band gap capable of accommodating detector cutoff wavelengths ranging from 4 to 15 µm and beyond. When coupled with the unipolar barrier infrared detector architecture, the InAs/InAsSb T2SLS mid-wavelength infrared (MWIR) focal plane array (FPA) has demonstrated a significantly higher operating temperature than InSb FPA, a major incumbent technology. In this brief review paper, we describe the emergence of the InAs/InAsSb T2SLS infrared photodetector technology, point out its advantages and disadvantages, and survey its recent development.
We studied long and very long wavelength InAs/InAsSb superlattice barrier infrared detectors that contain p-type absorber layers in order to take advantage of the longer electron diffusion length for quantum efficiency (QE) enhancement. While they can achieve higher QE than devices that use only n-type absorbers, their dark current characteristics are affected by the presence of metallurgical and surface p–n junctions, and are best operated under lower biasing conditions where the tunneling dark currents are less pronounced. Rather than using a p-type absorber only, a barrier infrared detector structure with a combination of p- and n-type absorber sections can benefit from a shallower mesa etch that reduces fabrication demands and also decreases the p-type absorber exposed surface area. We compare four complementary barrier infrared detector structures that use an n-type absorber, a combination of p- and n-type absorbers, or a p-type absorber and briefly report results from a 13.3 μm cutoff focal plane array.
29 January 2010 in IEEE Journal of Quantum Electronics
Quantum well infrared photodetectors (QWIPs) are well known for their stability, high pixel-pixel uniformity and high pixel operability which are quintessential parameters for large area imaging arrays. In this paper we report the first demonstration of the megapixel-simultaneously-readable and pixel-co-registered dual-band QWIP focal plane array (FPA). The dual-band QWIP device was developed by stacking two multi-quantum-well stacks tuned to absorb two different infrared wavelengths. The full width at half maximum (FWHM) of the midwave infrared (MWIR) band extends from 4.4-5.1 ¿m and FWHM of the long-wave infrared (LWIR) band extends from 7.8-8.8 ¿m. Dual-band QWIP detector arrays were hybridized with direct injection 30 ¿m pixel pitch megapixel dual-band simultaneously readable CMOS read out integrated circuits using the indium bump hybridization technique. The initial dual-band megapixel QWIP FPAs were cooled to 68 K operating temperature. The preliminary data taken from the first megapixel QWIP FPA has shown system NE¿T of 27 and 40 mK for MWIR and LWIR bands, respectively.